ATT DEFINITY Communications System Generic 3 Instructions Manual

Security Violation Notification (SVN)
Issue  3   March 1996
3-1075
3
Security Violation Notification (SVN)
Feature Availability
This feature is available on all versions of the DEFINITY Communications System.
Description
The Security Violation Notification (SVN) feature notifies a designated referral 
point of a security violation. A designated referral point can be an attendant 
console, display equipped voice terminal, or voice terminal without display 
requiring the notification to be by announcement....

Feature Descriptions
3-1076Issue  3   March 1996 
nThe authorization c o de security violation feature button ‘‘asvn-halt.’’
Repeated  security violations can result in numerous referral calls being ma de in 
a short  period of time.
Login ID Kill After ‘‘N’’ Attempts
The Login ID Kill After ‘‘N’’ Attemp ts feature p rovides the ability to disable a login  
ID when a login security violation is d etected for a valid login ID (the numb er of 
invalid login attempts permitted in a specified time interval...

Security Violation Notification (SVN)
Issue  3   March 1996
3-1077
SVN Referral Call With Announcement
The SVN Referral Call with Announcement option has the capacity to provide a 
recorded message identifying the type of violation accompanying the SVN 
referral call. Using Call  Forwarding, Call Coverage, or Call Vector  Time-of-Day 
Routing (to route to an extension or a number off the switch), SVN referral calls 
with  announcements can terminate to a point on or off the switch.
Use of other means to...

Feature Descriptions
3-1078Issue  3   March 1996 
—EIA: Other EIA ports.
The following a b breviations are used for G3r:
—SYSAM-LCL: Local administration to Manager 1.
—SYSAM-RMT: Dial up port on SYSAM board, typically used by  
services for remote maintenance, and used b y the switch to c all out  
with alarm information.
—SYS-PORT: System ports accessed through TDM bus.
—MAINT: Ports on exp ansion p ort network maintenance boards, 
used  as a local connection for onsite maintenance.
nExt: The extension...

Security Violation Notification (SVN)
Issue  3   March 1996
3-1079
nMbr: The trunk group member number associated with the trunk  where 
the attempt terminated. It a p pears only when an authorization code is 
used to access a trunk.
nBarrier Code: The  incorrect  barrier code that resulte d in the invalid  
attempt. It a p pears only when an authorization code is entered to invoke 
Remote Access.
nExt: The extension associated with the station or attendant originating the 
call. It appears only when...

Feature Descriptions
3-1080Issue  3   March 1996 
nReferral Destination
This field requires an entry of an extension, assigned to a station, 
attendant console, or vector directory number (VDN) that receives 
the referral call when a security violation occurs. If a VDN is 
assigned the Time-of-Day routing capability, Call Vectoring may be 
used to route the referral call to different destinations based on the 
time of day or the day of the week. The referral destination must be 
equip ped with a display...

Security Violation Notification (SVN)
Issue  3   March 1996
3-1081
To disable a login ID, the user must:
1. Log in to the switch using a login ID with the correct permissions.
2. Enter the command disable login .
List the Status of a Login ID
To list the status of a login ID, the user must:
1. Log in to the switch using a login ID with the correct permissions.
2. Enter the command list login.
You see a display indicating the status of the s pecified login ID. A login ID  status 
can be listed as:
nLogin...

Feature Descriptions
3-1082Issue  3   March 1996 
The originating extension initiates the referral call in the event of a 
Remote  Ac c ess security violation. It also sends the appropriate 
alerting message  or display to the referral destination.
nReferral Destination
This field requires an entry of an extension, assigned to a station, 
attendant console, or vector directory number (VDN) that receives 
the referral call when a security  violation occurs. If a VDN is 
assigned the Time-of-Day routing...

Security Violation Notification (SVN)
Issue  3   March 1996
3-1083
To disable Remote Access, the user must:
1. Log in to the switch using a login ID with the correct permissions.
2. Enter the command disable login.
Administering Authorization Code Security 
Violation Parameters
To administer the Authorization Code component of the SVN feature, the user 
must:
1. Access the “System Parameter Security”  form by entering the change  
system-parameters security command from the command line  
interface.
2....

Feature Descriptions
3-1084Issue  3   March 1996 
nTime Interval
This field requires the entry of the time interval in which the 
authorization  c o de se curity violations must occur. The range for the 
time  interval is one minute to eight hours (0:01 to 7:59), and is 
entered in  the form ‘‘x:xx.’’ For example, if you want the time 
interval to be one  minute, you enter ‘‘0:01.’’ If you want the time 
interval to be  seven and one-half hours, you enter ‘‘7:30.’’ The 
system default is 0:03....