ATT DEFINITY Communications System Generic 3 Instructions Manual

Recent Change History
Issue  3   March 1996
3-997
nPort — The port, or group of ports, the user was connected to. The users 
are defined as:
G3i, G3s, and G3vs Port Types
—G3-MT
— INADS
—EPN
— NET
G3r Port Typ es
— SYSAM-LCL
— SYSAM-RMT
—MAINT
— SY S-PO RT 

Feature Descriptions
3-998Issue  3   March 1996 
Table 3-73 shows the way the software correlates the port number to the 
user that is displayed under Port on the report.
nLogin — The system login of the user entering the data command; for 
example, 
cust.
nAction — The first command word  entered; specifies the operation to be 
performed; for example, add, change, remove. Also indicates when a 
user has logg e d into or off of the system.
Table 3-73. Software Port Correlations for G3i, s, vs, and r
Port...

Recent Change History
Issue  3   March 1996
3-999
nObject — The second command word or words entered; specifies the 
specific object to be acted on; for example station, trunk group. (If the 
object is multiple words, only the first word will be displayed. All 
succeeding words will be treate d as qualifiers.)
nQualifier — The third command word or words entered; one or more words 
or digits used to further identify or comp lete the object; for exam ple, 
1120 
(the station number).  Some commands do not...

Feature Descriptions
3-1000Issue  3   March 1996 
Recorded Announcement
Feature Availability
This feature is available with all Generic 3 releases. Barge-in announcements are 
available with G3V3 and later releases. The c a pability to install multi ple 
Integrated Announcement b oards is available with G3V4 and later releases. Also, 
the capa bility to install external lineside T1 (DS1) connected announcements is 
available with G3V4 and later releases.
Description
Provides a recorded announcement to...

Recorded Announcement
Issue  3   March 1996
3-1001
nDS1 (DS1FD, DS1SA or DS1OPS)
An analog-type announcement connected by way of a DS1 line port. This 
announcement type is used with Conversant VIS equip ped with lineside 
T1 circuit packs providing standard announcements for the DEFINITY 
switch.
nAuxiliary Trunk
An auxiliary trunk announcement requires an external announcement 
machine connected by way of an auxiliary trunk.
nIntegrated
An Integrated Announcement is stored internally on the switch on...

Feature Descriptions
3-1002Issue  3   March 1996 
Integrated Announcements
An Integrated Announcement is stored on the DEFI NIT Y swi t c h  on  a TN750 
Integrated Announcement  circuit  pack. Multiple announcements can be stored 
on each b oard up to the system capacity. (See Ap pendix A, System Parameters 
for Integrated Announcement board system capacities.)
Each Integrated Announcement board has 16 ports, and can play up to 16 
simultaneous announcements. Multiple users can  be connected to each of...

Recorded Announcement
Issue  3   March 1996
3-1003
The TN750C board has on-board FLASH memory backup. When the board is 
removed from the switch or power is lost, the announcements are retained on the 
board. Therefore, the TN750C does not require the Save and Restore  procedure. 
However, the Save and Restore procedure c an still be used to  copy the contents 
of a TN750C to another board.
The TN750C substantially reduces the time required for power-up restore and 
eliminates the need for a manual save...

Feature Descriptions
3-1004Issue  3   March 1996 
intercept tone. If the announcement is currently being played to callers, the user 
hears reorder tone. If the record ing session is started, the user hears record  tone 
and can begin recording. 
When the record ing is complete, dial # if using a hybrid telephone or hang up if 
using an analog or digital telephone. When using an analog or digital telephone, 
ending with a “#” puts a tone in the message. After hanging up, the user may 
record another...

Recorded Announcement
Issue  3   March 1996
3-1005
Administration
Recorded Announcement is administered by the System Manager. 
Announcements can be recorded by any user with console permissions. See the 
DEFI NI TY Com munications System Generic 3 Version 4 Implementation, 
555-230-655, or 
DEFI NI TY Com munications System Generic 3 V2/V3 
Implementation
, 555-230-653, for instructions for a dministering Recorded 
Announcements.
Hardware and Software Requirements
Hardware requirements may include any...

Feature Descriptions
3-1006Issue  3   March 1996 
Recorded Telephone Dictation Access
Feature Availability
This feature is available with all Generic 3 releases.
Description
Permits voice terminal users, including Remote Access and incoming tie trunk 
users, to access dictation equipment.
The d i ctation e quipment is accessed by dialing an access code or extension 
number (depending on how the feature is a dministered).  After the dictation 
equipment is accessed, the start/stop function can be voice-...