ATT DEFINITY Communications System Generic 3, Installation, Administration, And Maintenance Of CallVisor, ASAI Instructions Manual

							Glossarybbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
BRIBasic Rate Interface
BridgeA router that connects two or more networks and forwards
packets among them. Usually, bridges operate at the physical
network level.  For example, an Ethernet bridge connects two
physical Ethernet cables and forwards from one cable to the
other exactly those packets that are not local.  Bridges differ
from repeaters because bridges store and forward complete
packets while repeaters forward electrical signals. 
See
brouter.
BrouterBridge/Router.  In local area networking, a device that
combines the dynamic routing capability of an internetwork
router with the ability of a bridge to interconnect dissimilar
LANs.  It has the ability to route one or more protocols and
bridge all other traffic.  The DEFINITY LAN Gateway
application links ISDN and TCP/IP at both a physical and
addressing level. 
See bridge and router.
ClientFor the DEFINITY LAN Gateway, a computer that is a
consumer of ASAI service.
IPInternet Protocol
LCDLiquid Crystal Display
Link
See ASAI link.
MCCMulti-Cabinet Carrier
RouterAny machine responsible for making decisions about which of
several paths network (or Internet) traffic will follow. At the
lowest level, a physical network bridge is a router because it
chooses whether to pass packets from one physical wire to
another. Within a long haul network, each individual packet
switch is a router because it chooses routes for individual
packets.  In the Internet, each IP gateway is a router because
it uses IP destination addresses to choose routes. 
See
brouter.
SCCSingle Cabinet Carrier
TelnetThe TCP/IP protocol governing the exchange of character-
oriented terminal data.  Also, the process by which a person
using one computer can sign on to a computer in another city,
state, or country.  With Telnet, a user can work from a PC as
if it were a terminal attached to another machine by a hard-
wired line.
GL-2  Issue 1  January 1996 
						

							Glossarybbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
TCPTransport Connection Protocol
TCP/IP PortA numbered access ``subaddress for an IP address that
usually indicates the service or application that is desired to
engage in a communications session.
Issue 1  January 1996   
GL-3 
						

							bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbb
Index
104A connecting block, 2-15
10BaseT Ethernet, 1-1
116A, 2-20
in DC-powered switch, 2-10
bbbbbbbbbbbbbbbbbbbb
A
Adapter
faceplate, 2-13
Adapter cables, 2-7
Add Client Link screen, 3-33
Add Host screen, 3-20
Add Logins screen, 3-11
Add Routes screen, 3-29
Administration
requirements, 1-1
Administration methods, 1-2
Administration/maintenance terminal, 2-17
ADUs, 
See Asynchronous Data Units
Alarm Board, 2-10
Alarm board
cables, 2-14
Alarm Board
cables
connecting, 2-7
slot, 2-8
Alarms on LCD, 2-12
ALB, 
See Alarm Board
Asynchronous Data Units, 2-17
AT&T services personnel, 2-1, 2-17
Audit trail
and system security, 1-5
Automatic system boot, 2-11
bbbbbbbbbbbbbbbbbbbb
B
BRI transport, 1-1
Bringing up the system, D-2
Brouter, 1-1, 1-4
Brouter Administration screen, 3-31
bbbbbbbbbbbbbbbbbbbb
C
Cable
group 300, 2-15
group 311, 2-20
Cable requirements
for installation, 2-2
Cables, 1-5, 2-9
adaper, 2-7
alarm board, 2-14
Carrier
insertion of system assembly, 1-5
Carrier restrictions, 2-8
Change Passwords screen, 3-13
Circuit packs, 1-4
Client Access Logs screen, 3-45
Command Logs screen, 3-47
Components
verifying, 2-1
Connecting
terminals, 2-17
Connecting block
104A, 2-15
Connecting the
Alarm Board cables, 2-7
Connecting the system assembly, 2-4
Connections
external, 2-4
Connectors
port, 1-5
Customer options form, 2-3
bbbbbbbbbbbbbbbbbbbb
D
DC-powered switch, 2-10
Default Gateway screen, 3-25
Default passwords, 1-5
DEFINITY
customer options form, 2-3
switch requirements, 2-2
DEFINITY AUDIX
circuit packs, 1-4
system assembly, 1-3
DEFINITY LAN Gateway
placement in switch carrier, 2-2
 IN-1 
						

							Indexbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
DEFINITY LAN Gateway Reset Log screen, 3-46
Disk
care of, 2-11
crash, 1-5, 2-7
bbbbbbbbbbbbbbbbbbbb
E
Equipment
and safety considerations, 2-3
for use with DEFINITY LAN Gateway, 2-6
optional terminal, 2-7
Ethernet (10BaseT), 1-1
Ethernet transport, 1-1
Existing system
upgrading, 1-5
External connections, 2-4
bbbbbbbbbbbbbbbbbbbb
F
Faceplate adapter, 2-13
Forms
DEFINITY customer options, 2-3
Function keys, 3-3, 3-4
bbbbbbbbbbbbbbbbbbbb
G
G3-MA, 2-17
G3-MT terminal, 2-27
Group 300 cable, 2-15
Group 311 cable, 2-20
bbbbbbbbbbbbbbbbbbbb
H
Hardware, 1-2
testing, 2-7
Heartbeat, 2-12
Help screens, 1-2
Humidity requirements
for installation, 2-3
bbbbbbbbbbbbbbbbbbbb
I
Installation
prerequisites, 2-1
safety considerations, 2-1
tools required, 2-1
verifying connectivity, 2-1
Installing
optional terminals, 2-17
Installing the system assembly, 2-7
Installing the terminal (optional), 2-7
Isolating data interface, 2-10, 2-20
bbbbbbbbbbbbbbbbbbbb
L
LAN connection, 2-15
installation requirements, 2-2
LCD, 
See Liquid Crystal Display
Liquid Crystal Display, 2-12
states, 2-13
list configuration command, 2-30
Local Host Table screen, 3-18
Logging on, 3-2
Login Attempt Log screen, 3-44
Login prompt
obtaining, D-2
Login/Password Administration screen, 3-9
Logins
deactivating/activating, 2-41
bbbbbbbbbbbbbbbbbbbb
M
Main Menu screen, 3-7
Maintenance (Main Menu) screen, 3-35
Message Collection Period screen, 3-53
MFB, 
See Multi-Function Board
Modem
connecting, 2-7
MultiCarrier Cabinet, 2-8
Multi-Function Board, 2-10
slot, 2-8
IN-2   
						

							Indexbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbbbbbbbbbbbbbbbbb
N
Network Routing Daemon screen, 3-23
Network Routing Information (Main Menu) screen, 3-22
Network Routing Table screen, 3-27
Null modem, 2-10, 2-18
bbbbbbbbbbbbbbbbbbbb
P
Parameters
default, 1-2
TCP/IP, 1-1
Password
changing default, 1-5
protection, 1-5
Passwords
choosing, 3-13
Ping Host screen, 2-36, 3-48
Port connectors, 1-5, 2-7
Port Status/Control screen, 3-49
Port usage, 2-18
Power
cycling, 1-5, 2-8
Procedures
bringing up the system, D-2
logging on, 3-2
solving terminal connection problems, D-3
Project Manager
responsibilities, 2-2
Protocol
supported, 1-6
bbbbbbbbbbbbbbbbbbbb
R
Releases supported, 1-1
Removable media, 1-4
Removable Media Operations screen, 3-36
Requirements
installation, 2-1
slot, 2-2
Reset System screen, 3-40
Restrictions
slot and carrier, 2-8
RS-232
connectors, 2-18
RS-232 connection, 2-17
bbbbbbbbbbbbbbbbbbbb
S
Safety considerations, 2-3
during installation, 2-1
SAT-PC, 2-17, 
See G3-MA
Screens
Add Client Link, 3-33
Add Host, 3-20
Add Logins, 3-11
Add Routes, 3-29
Brouter Administration, 3-31
Change Passwords, 3-13
Client Access Logs, 3-45
Command Logs, 3-47
Default Gateway, 3-25
DEFINITY LAN Gateway Reset Log, 3-46
Local Host Table, 3-18
Login Attempt Log, 3-44
Login/Password Administration, 3-9
Main Menu, 3-7
Maintenance (Main Menu), 3-35
Message Collection Period, 3-53
Network Routing Daemon, 3-23
Network Routing Information (Main Menu), 3-22
Network Routing Table, 3-27
Ping Host, 2-36, 3-48
Port Status/Control, 3-49
Removable Media Operations, 3-36
Reset System, 3-40
Security Logs, 3-43
Set System Time and Date, 3-37
System Logs, 3-42
TCP/IP Administration (Main Menu), 3-15
This Host, 2-33, 3-16
Security considerations, 1-5
Security Logs screen, 3-43
Set System Time and Date screen, 3-37
Setting system clock, 2-32, 
See Setting system time and date
Shutdown procedure
when needed, 1-5, 2-7
Single Carrier Cabinet, 2-8
Site requirements
cable, 2-2
DEFINITY switch, 2-2
humidity, 2-3
LAN connection, 2-2
temperature, 2-2
workspace, 2-2
Site selection
verifying, 2-1
Slot
Alarm Board, 2-8
 IN-3 
						

							Indexbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Multi-Function Board, 2-8
number required, 2-8
requirements, 2-2
Slot restrictions, 2-8
Software, 1-4
Solving terminal connection problems, D-3
Supported equipment, 2-6
Switch
cycling power, 1-5, 2-8
DC-powered, 2-10
Switch carrier
inserting system assembly in, 1-5, 2-7
System
assembly, 1-2
hardware, 1-2
registering, 2-41
requirements, 2-2
security, 1-5
states, 2-13
upgrade, 1-5
System assembly, 1-1
connecting, 2-4
in carrier, 1-5, 2-7
inserting in cabinet, 2-10
inserting in existing switch, 2-13
installation, 2-7
installing, 2-7
System boot
automatic, 2-11
System clock
setting, 2-32
System Logs screen, 3-42
bbbbbbbbbbbbbbbbbbbb
T
Tape cartridge, 2-42
TCP/IP, 1-4
TCP/IP Administration (Main Menu) screen, 3-15
Temperature requirements
for installation, 2-2
Terminal
administration/maintenance, 2-17
connecting, 2-17
installing, 2-7
optional, 2-17
setting options for, 2-20
Terminal emulation packages, 2-17
Terminal (G3-MT), 2-27
Testing harware, 2-7
This Host screen, 2-33, 3-16
TN2170 (Alarm Board), 1-2
TN2208 (Multi-Function Board), 1-2Toll fraud, 1-5, 1-6
Tools required for installation, 2-1, 2-3
Transport
Ethernet vs. BRI, 1-1
TSC, 
See Technical Service Center
bbbbbbbbbbbbbbbbbbbb
V
Verifying components, 2-4
Verifying connectivity, 2-4
Verifying site selection, 2-1
bbbbbbbbbbbbbbbbbbbb
W
Workspace requirements, 2-2
IN-4