ATT DEFINITY Communications System Generic 3 Basic Call Management System Instructions Manual

BCMS Report Generation
4-66Issue  4  September 1995 
may be indicated as either a 1- or 2-digit number. Minutes are always 
expressed as two digits. If no start time is given, the report displays data 
accrued for the previous 24 time intervals (hour or half-hour).
NOTE:
Whether the system c ollects the data in hourly or half-hourly intervals 
depends on the Measurement Interval setting  in the Feature-Related  
System Parameters screen.
2. Press 
RETUR N.
— The BCMS Trunk Group Report prints at the...

BCMS Trunk Group Report
Issue  4  September 1995
4-67
always expressed as two digits. If no start time is given, the report 
displays data accrued for the previous 24 time intervals (hour or 
half-hour).
NOTE:
Whether the system c ollects the data in hourly or half-hourly intervals 
depends on the Measurement Interval setting  in the Feature-Related 
System Parameters screen.
2. Press 
RETUR N.
— The Report Scheduler form ap pears on your sc reen. The cursor is 
located in the Print Interval: field....

BCMS Report Generation
4-68Issue  4  September 1995 
Screen 4-31. Report Scheduler Form with the Print Interval Set to scheduled
4. Enter the time you want the report printed and press RETURN.
— The cursor moves to the Sun: field.
5. Enter y for the day(s) you want the report printed. Use 
RETU RN to move the 
cursor to the next field.
6. When you are finished, press 
ENTE R.
— The report has been scheduled, and the system presents the enter 
command: prompt.
Scheduling a Daily Report to Print
To...

BCMS Trunk Group Report
Issue  4  September 1995
4-69
Screen 4-32. Report Scheduler Form
NOTE:
If you do not have a printer directly connected to your terminal, you 
can immediately print the report to the system printer by pressing 
ENTE R.
3. Enter schedule and press 
RETU RN.
— The Print Time: field  appears beneath the Print Interval: field, and 
fields for each day of the week appear at the bottom of the form. 
The cursor is located in the Print Time: field.
Screen 4-33. Report Scheduler Form with...

BCMS Report Generation
4-70Issue  4  September 1995 
5. Enter y for the day(s) you want the report printed.  Use RETURN to move the 
cursor to the next field.
6. When you are finished, press 
ENTE R.
— The report has been scheduled, and the system presents the enter 
command: prompt.
BCMS Trunk Group Summary Report
The BCMS Trunk Group Summary Report provides information about 
BCMS-measured trunk groups. You can specify the trunk groups you want 
included in the report. The BCMS Trunk Group Report can...

BCMS Trunk Group Summary Report
Issue  4  September 1995
4-71
Screen 4-34. BCMS Trunk Group Summary Report — Hourly
Screen 4-35. BCMS Trunk Group Summary Report — Daily
Report Headers, Abbreviations, 
and Their Definitions
This report presents header information at the top of each page. This information 
includes the command entered to generate the report, the page number of the 
report, the title of the report, and the time and date the report was generated.
TIME/DAY — The time or day interval sp e...

BCMS Report Generation
4-72Issue  4  September 1995 
completed time interval (hour or half-hour) is the default. If no start time or stop  
time is given, the report dis plays data accrued for the previous 24 time intervals. 
If you s pecify 
day in the command and do not include a start d ay or stop day, the 
report displays data a c crued for the previous six d ays and data accrued through 
the most recently completed interval (hour or half-hour).
If switch administration causes the number of trunks in...

BCMS Trunk Group Summary Report
Issue  4  September 1995
4-73
OUTGOING CCS — The total holding time for outgoing calls from this trunk 
g roup. The units are expressed in CCS.
% ALL BUSY — The percentage of time that all the trunks in this trunk group 
were busy. This value in cludes trunks that are maintenance b usy. The c alculation 
is:
where
Busy Times is expressed in minutes and is the sum of all times when all trunks 
were simultaneously busy.
% TIME MAINT — The perc entage of time that one or more...

BCMS Report Generation
4-74Issue  4  September 1995 
Displaying an Hourly/Half-Hourly
Interval Report
To display this report, perform the following step s:
1. Enter list bcms summary trunk ## time xx:xx xx:xx (where ## 
is a valid BCMS measured trunk group). If the trunk g roup is only one digit 
(for example, trunk 5), just enter the single digit. The first specified time is 
referred to as the start time, while the second time is referred to as the 
stop time. Time must be displayed in 24-hour format;...

BCMS Trunk Group Summary Report
Issue  4  September 1995
4-75
Printing the BCMS Trunk Group Summary 
Report
BCMS allows you to collect data in either hourly/half-hourly intervals or daily 
intervals and p rint the report. If you have a printer directly connected to your 
terminal, you may print reports using the instructions provided below. If you do 
not have a p rinter d irectly connected to your terminal, c onsult the instructions for 
sc heduling reports to print to the system printer.
Printing an...