ATT Definity Addendum 1 For Ds1, Dmi, Isdn Pri Instructions Manual

ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 857-33
Fields 6-7
Field 8
Fields 9-11
Field 12
Field 13
Field 14Selects in/out touch-tone availability. Field encodes and their descriptions are:
0
1When only rotary pulses are received via the trunk group
When either rotary pulses or tough-tone can be accepted
NOTE: The ISDN-PRI applications use the D-channel to transmit and receive
dialed digits. Dialed digits are transmitted as ASCII characters. Therefore, for
ISDN applications, this field is ignored;...

7-34ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 85
Field 15Advanced Private Line Termination (APLT) services are not applicable in the ISDN-
PRI environment. Therefore, for trunk groups using ISDN-PRI facilities, this field is
ignored. Refer to Appendix C, Administrative Procedure Summary, for more
information about the dynamic 120 trunk types.½
Field encodes and their descriptions are:
0 When APLT services are not available for analog or DS1/DMI-BOS facilities
1 When APLT services are available for...

ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 857-35
ENHANCED MODE — PROCEDURE: 103, WORD: 1
NETWORK TRUNK GROUP TRANSLATION
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.Trunk Group:
Facility Restriction Level:
Network Trunk:
Main/Tandem:
Incoming Tie to AAR/ARS or APLT:
Authorization Code Required:
Bridge-On Allowed:
Trunk Reservation Limit:
AAR/ARS Prefix:
Data Protection (Permanent):
Remote Access Echo Suppressor:
AAR Conditional Routing:
Second TCM:
Digit Collection:
Bearer Capability:...

7-36ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 85
Field 15V4 Only
Used for non-ISDN trunk groups that interwork to ISDN trunk groups. Therefore,
field 15 only applies to non-ISDN trunk groups. Generally, trunk groups can use both
analog and ISDN-PRI (digital) transmission facilities. Any restrictions and
compatibility requirements are conveyed as information known as the BC code. This
field is used to populate the BC IE. Field encodes and their descriptions are:½
0 Voice and Voice-grade data
1 Mode...

ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 857-37
ENHANCED MODE — PROCEDUURE: 116, WORD: 1
DS1 AND ISDN TRUNK ASSIGNMENTS
EQUIPMENT LOCATION
1.
2.
3.
4.
5.Module:
Cabinet:
Carrier:
Slot:
Circuit:
6.
7.
8.
9.
10.Trunk Group:
Night Terminal:
Disable Signaling:
AIOD Equipment Number:
Interface Endpoint:
Connected to CC0 ON-LINE
enter command:
Figure 7-15. Procedure 116 Word: 1 DS1 Trunk Assignments to Equipment/Circuit Location
(System 85 R2V4)½
½
The DS1 channels are assigned to slot and circuit...

7-38ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 85
TABLE 7-3. DS1/ISDN-PRI Administration— Channel Versus Trunk Assignments
DS1 ChannelSlot/Circuit
DS1 ChannelSlot/Circuit
1
2
3
4
5
6
7
8*/0
*/1
*/2
*/3
*/4
*/5
*/6
*/7
13
14
15
16
17
18
19
20*+1/0
*+1/1
*+1/2
*+1/3
*+1/4
*+1/5
*+1/6
*+1/7
9
10
11
12
*/8
*/9
*/10
*/1121
22
23
24*+1/8
*+1/9
*+1/10
*+1/11
LEGEND:
*
Any slot for the TN767 except slot number one in the universal port carrier.
*+1The slot next to the TN767 or TN555.
NOTE: Channel 24 is...

ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 857-39
Field 8Disables a channel’s signaling. Field encodes and their descriptions are:
- (Dash) used when ISDN is enabled.
0 Used when signaling is enabled. This is the default option (not used with ISDN).
1 Used when signaling is disabled. Use this with dedicated switched connection to
disable signaling for a tie trunk. The signaling bit then can be used as a data bit,
allowing the full 64K-bps to be used for data.
Field 9Not applicable for ISDN-PRI....

7-40ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 85
ENHANCED MODE — PROCEDURE: 012, WORD: 1
NAME DATABASE — NAME TO BE DISPLAYED
1.
2.
3.
4.
5.
6.Extension, VDN, or Trunk Group:
Type:
Display Start:
Outgoing Trunk Display:
Copy Mode:
Extension, VDN, or Trunk Group to Copy or Share:
DISPLAY ONLY
7.
8.
9.Characters In Name:
Shared Primary Extensions or Trunk Groups:
Associated Extension Name Assigned:
Connected to CC0 ON-LINE
enter command:½
Field 2
Field 3Figure 7-16. Procedure 012 Word 1: Name...

ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 857-41
Field 4The main function of this field is to provide some administration control over what is
displayed on the voice terminals digital display. Field encodes and their descriptions
are:
-
(Dash) for all incoming only trunk groups.
0
Used when the user (extension) does not want the outgoing trunk group name
displayed but does desire the dialed number to remain on the display.
1
Used when the user desires to display the name of the outgoing trunk...

7-42ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 85
ENHANCED MODE — PROCEDURE: 012, WORD: 2
NAME DATABASE - ENTRY
1. Segment:
CHARACTER ENCODES
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.Character 1:
Character 2:
Character 3:
Character 4:
Character 5:
Character 6:
Character 7:
Character 8:
Character 9:
Character 10:
Connected to CC0 ON-LINE
enter command:½
Field 1Figure 7-17. Procedure 012 Word 2: Name Database Entry (System 85 R2V4)
Identifies one-of-three 10-character fields. Field encodes and their...