ATT 993 Corded 2line Speakerphone Instruction Manual

8
Telephone operation
Menu structure      
Use the menu to customize the feature settings for your 
993 telephone. Press ENTER when the phone is in idle 
mode to access the menu.
ONE TOUCH
    PROGRAM
        WAIT
        EXIT PROGRAM
    VIEW
        DONE
    AUTO SPEAKER
    MAIN MENU
PHONE SETTINGS
PRIMARY LINE
ALS ON/OFF
PREFERRED MODE
SET TIME/DATE
LCD BACKLIGHT
SCROLL RATE
MAIN MENU
VOICE MESSAGE
    L
  COVM ON/OFF
    L2 COVM ON/OFF
    L  LIGHT OFF
    L2 LIGHT OFF
    MAIN MENU...

9
Telephone operation
Turn auto speaker on or off                                             
Choose whether pressing a one-touch key while the 
telephone is on hook automatically initiates a speed dial 
call or displays the speed dial number without dialing. If 
you want to automatically dial the speed dial numbers 
by pressing a one-touch key without taking the handset 
off hook first, set auto speaker to ON. To view the speed 
dial numbers on screen, press a one-touch key while the 
handset is...

20
Telephone operation
Feature setup
Turn automatic line selection on or off                           
When this feature is turned on and the telephone is off 
hook, it automatically connects to a preset line. Lines are 
prioritized in the following order: ringing primary, ringing 
non-primary, idle primary, idle non-primary, and busy 
primary.
Ringing primary: When the primary line is set to Line    
and Line    is ringing, Line    is automatically connected.
Ringing non-primary: When...

2
Telephone operation
Feature setup
Set preferred mode                                                         
Choose the mode (headset or speakerphone) which will 
be used automatically when dialing a number from the 
directory, speed dial or call history without lifting the 
handset. The preferred mode will also be used when auto 
speaker is set to ON, and you dial a speed dial number 
without lifting the handset. For information about the 
auto speaker setting, see Turn auto speaker on or off...

22
Telephone operation
Set the time and date                                                      
If you subscribe to caller ID service, the time and date are 
set automatically with each incoming call. You can set the 
time and date manually following these instructions.
Press ENTER to begin feature setup.
Press  until the screen displays PHONE SETTINGS. 
Press ENTER. The screen displays PRIMARY LINE.
Press  until the screen displays SET TIME/DATE. 
Press ENTER. The screen displays Enter new time 
and...

23
Telephone operation
Feature setup
Turn screen backlight on or off                                       
Press ENTER to begin feature setup.
Press  until the screen displays PHONE SETTINGS.
Press ENTER. The screen displays PRIMARY LINE.
Press  until the screen displays LCD BACKLIGHT and 
the current setting.
Press  or  to select ON and OFF.
When the correct setting is shown, press  or ENTER 
to save your choice. The screen displays SCROLL 
RATE.
Proceed to step 5 of Set the scroll rate below to set...

24
Telephone operation
Feature setup
Turn the central office voicemail (COVM) indicator on 
or off
If you subscribe to voicemail service with your telephone 
service provider, turn the COVM indicator on to have the 
NEW CALL light for that line flashing when there are 
messages waiting. If you do not subscribe to voicemail 
service, turn the COVM indicators off for each line.
Press ENTER to begin feature setup.
Press  until the screen displays VOICE MESSAGE.
Press ENTER. The screen displays L1 COVM...

25
Telephone operation
Feature setup
Turn NEW CALL light off                                                  
If a NEW CALL light continues to flash when there are 
no messages on that line, you may have received a false 
signal from your telephone service provider. You can turn 
off the light manually.
Press ENTER to begin feature setup.
Press  until the screen displays VOICE MESSAGE.
Press ENTER. The screen displays L1 COVM ON/OFF.
Press  until the screen displays L1 LIGHT OFF.
Press ENTER to turn...

26
Telephone operation
Feature setup
Program home and local area codes                               
Home area code is the area code for your telephone 
number. Most users dial the seven digits of a telephone 
number to make a call within their own area code and 
 digits outside of their area code. If this applies to you, 
you should enter your own area code into the telephone 
as the home area code. After setting, if you receive a 
call from within your home area code, the screen will...

27
Telephone operation
Feature setup
Program home and local area codes                                     
When finished entering all of the area codes you need 
to program, press  until the screen displays DONE. 
Press ENTER. The screen displays CALL HISTORY.
Proceed to step 5 of Set call history on page 28 to 
set the next feature (Call history).
— OR —
Press and hold ENTER to return to the idle screen.
6.
7.
8.