Asus S62 Service Guide
Have a look at the manual Asus S62 Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 379 Asus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 56
Assembly procedure
2. Connect the MAIN & AUX antenna and paste 1 piece of tape to secure antennas.
HDD Module HDD
MODULE The illustrations below show how to assemb le and install the HDD module of the
notebook
1. Secure 4 screws [M3 * 4(L) ] to fix HDD into HDD housing. HDD
INSTALLATION
M3*4L
2....](http://img.usermanuals.tech/thumb/8/59890/w64_asus-s62-service-guide-55.png "Page 56
Assembly procedure
2. Connect the MAIN & AUX antenna and paste 1 piece of tape to secure antennas.
HDD Module HDD
MODULE The illustrations below show how to assemb le and install the HDD module of the
notebook
1. Secure 4 screws [M3 * 4(L) ] to fix HDD into HDD housing. HDD
INSTALLATION
M3*4L
2....")
![Page 58
Upgrade & Replacement
4 – 1
Chapter
4
Upgrade & Replacement
Follow the individual procedures in this chapter to perform the
notebook’s upgrade and replacement of various major components.
sus S62 Series Notebook is a 2 spindles product, which means there are l\
ess
options for you to upgrade to. The key upgradeable and replaceable items include
the CPU module, memory module , HDD module, and ODD module.
In order to a
void redundancy, please...](http://img.usermanuals.tech/thumb/8/59890/w64_asus-s62-service-guide-57.png "Page 58
Upgrade & Replacement
4 – 1
Chapter
4
Upgrade & Replacement
Follow the individual procedures in this chapter to perform the
notebook’s upgrade and replacement of various major components.
sus S62 Series Notebook is a 2 spindles product, which means there are l\
ess
options for you to upgrade to. The key upgradeable and replaceable items include
the CPU module, memory module , HDD module, and ODD module.
In order to a
void redundancy, please...")
Upgrade & Replacement
4 - 4
4. Turn the non-remo vable screw here 180 degrees counter-clockwise to
loosen the CPU.
5. Squeeze the vacuum handling pump and use it to lift the CPU away.
Installing CPU
The illustration below shows how to install CPU and the heat sink of the
notebook.
1. Squeeze the vacuum handling pump and use it to install the CPU.
2. Turn the non-removable screw here 180 degrees clockwise to lock the
CPU.
CPU
INSTALLATION
Unlock
L
O
CPU
INSTALLATION
Lock
L
O
Upgrade & Replacement
4 - 5
3. Install the CPU thermal module gent ly and connect the fan cable then
secure 2 screws (M2.5*4L (K)) to secure it.
M2.5*4L
4. Secure 4 screws (M2*3L (K)) by order.
1
2 3
4
M2*3L
5. Install the CPU door and secure 2 screws (M2.5*4L (K)) to secure it.
M2.5*4L
Install battery module
1. Install the battery module. Slide the battery latch to close the battery lock. BATTERY
INSTALLATION
Upgrade & Replacement
4 - 6
Second Memor y Upgrade MEMORY
The S62 Series Notebook does not have RAM onboard. There are two SO-
DIMM sockets for installing SO-DIMM RA M. It can upgrade the total memory
size up to 1GB with a 512MB module on each socket.
Upgrading Memory Module
Remove battery module
1. Unlock and hold the latch No (1).
1
2. Slide the battery lock (No.2) and pull the battery pack out.
2
3. Pull the battery pack out.
Upgrade & Replacement
4 - 7
Removing Memory module MEMORY
REMOVAL
1. Remove 2 screws (M2.5*4L (K )), then remove the DIMM door.
M2.5*4L
2. Open the 2 latches asi de (No. 1, 2), which will pop the memory module up to
an angle of 30 °, then pull out the memory modul e in that angle (No. 3).
1
3
Installing Memory Module
1. Insert the Memory module into the memory socket by an angle of 30 degree,
and push down to latch the memory module.
MEMORY
INSTALLATION
2
o30
MEMORY
INSTALLATION
o30
Upgrade & Replacement
4 - 8
2. Install the DIMM door and secure 2 screws (M2.5* 4L (K)) to secure it.
M2.5*4L
Install battery module
3. Install the battery module. Slide the battery latch to close the battery lock. BATTERY
INSTALLATION
Upgrade & Replacement
4 - 9
HDD Upgrade HDD
The S62 Series Notebook uses an industry-standard 2½” HDD with IDE
interface. You can replace the HDD to any capacity of your choice within our
approval and prior test.
Upgrading HDD
Remove battery module
1. Unlock and hold the latch No (1).
1
2. Slide the battery lock (No. 2) and pull the battery pack out.
2
3. Pull the battery pack out.
Upgrade & Replacement
4 - 10
Removing HDD Module HDD
MODULE
REMOVAL
1. Remove 3 screws (M2.5*4L (K )), then remove the HDD door.
M2.5*4L
2. Lift the HDD module and then remove it.
3. Remove 4 screws [M3 * 4(L)] to separate HDD from HDD housing.
M3*4L
Upgrade & Replacement
4 - 11
Installing new HDD module
4. Secure 4 screws [M3 * 4(L) ] to fix HDD into HDD housing. HDD
INSTALLATION
M3*4L
5. Insert the HDD module to connect the FPC connector until it’s installed
properly.
6. Install the bottom case and secure 3 screws (M2.5*4L(K)) to fix it.
M2.5*4L
Install battery module
7. Install the battery module. Slide the battery latch to close the battery lock. BATTERY
INSTALLATION
Upgrade & Replacement
4 - 12
Wireless LAN Module WIRELESS
The illustration below shows how to remove the Wireless LAN module. LAN
Replacing WLAN
Remove battery module WALN 1. Unlock and hold the latch No (1).
REMOVAL
1
2. Slide the battery lock (No. 2) and pull the battery pack out.
2
3. Pull the battery pack out.
Upgrade & Replacement
4 - 13
Removing WALN Module
1. Remove 1 piece of tape and disconnect the MAIN & AUX antenna. ODD
REMOVAL
2. And open the two latches to pop the MINI PCI MODULE up then pull it out.
Installing new WALN module WALN MODULE INSTALLATION 3. Install the MINI PCI module into t he socket by an angle of 30 degree, and
push down to latch the MINI PCI module.