Asus S62 Service Guide
Have a look at the manual Asus S62 Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 379 Asus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 14
Disassembly procedure
HDD Module HDD
MODULE The illustrations below show how to remove the HDD module from the notebook.
Removing HDD Module HDD
MODULE
REMOVAL
1. Remove 3 screws (M2.5*4L (K )), then remove the HDD door.
M2.5*4L
2. Lift the HDD module and then remove it.
3. Remove 4 screws [M3 * 4(L)] to...](http://img.usermanuals.tech/thumb/8/59890/w64_asus-s62-service-guide-13.png "Page 14
Disassembly procedure
HDD Module HDD
MODULE The illustrations below show how to remove the HDD module from the notebook.
Removing HDD Module HDD
MODULE
REMOVAL
1. Remove 3 screws (M2.5*4L (K )), then remove the HDD door.
M2.5*4L
2. Lift the HDD module and then remove it.
3. Remove 4 screws [M3 * 4(L)] to...")
service overview
1 - 11
Appropriate Tools TOOLS
The illustrations below show the appropriate t ools that should be used for the notebook’s
service and repair.
Phillips-head Screwdriver CROSS
SCREW- Use a Phillips-head screwdriver to fas ten/remove the K- or B-typed screws.
DRIVER
Single-Slotted Screwdriver FLATHEAD
SCREW-
Use a single-slotted screwdriver to lock/u nlock the flexible cable connector locks
DRIVER
Tweezers
Use a pair of tweezers to remove/insert flexible cables. TWEEZERS
Insertion and extraction tool for FPC connector INSERTION Use insertion and extraction tool for FPC connector to handle locking and unlocking of FPC
connectors. AND
EXTRACTION TOOL FOR FPC
CONNECTOR
Vacuum Handling Tool VACUUM Use Vacuum handling tool to handle CPU. HANDLING TOOL
Spacer Screwdriver SPACER Use a spacer screwdriver to fasten/r emove spacer screws or hex screws. SCREW-
DRIVER
Disassembly procedure
Chapter
2
Disassembly Procedure
Please follow the information provided in this section to perform the complete
disassembly procedure of the notebook . Be sure to use proper tools
described before.
SUS S62 Series Notebook consists of vari ous modules. This chapter describes the
procedures for the complete notebook disassemb ly. In addition, in between procedures,
the detailed disassembly procedure of indivi dual modules will be provided for your
service needs.
The disassembly procedure consis ts of the following steps:
A
• Battery Module
• HDD Module
• Wireless Module
• Memory Module
• CPU Module
• ODD Module
• Keyboard
• Top Case Module
• Motherboard
• Bottom case Module
• LCD Module
2 - 1
Disassembly procedure
Batter y Module BATTERY
BATTERY
MODULE
REMOVAL
The illustration below shows how to remove the battery module.
1. Unlock and hold the latch No (1).
1
2. Slide the battery lock (No.2) and pull the battery pack out.
2
3. Pull the battery pack out.
2 - 2
Disassembly procedure
HDD Module HDD
MODULE The illustrations below show how to remove the HDD module from the notebook.
Removing HDD Module HDD
MODULE
REMOVAL
1. Remove 3 screws (M2.5*4L (K )), then remove the HDD door.
M2.5*4L
2. Lift the HDD module and then remove it.
3. Remove 4 screws [M3 * 4(L)] to separate HDD from HDD housing.
M3*4L
2 - 3
Disassembly procedure
Wireless LAN Module WIRELESS
LAN The illustration below shows how to remove the Wireless LAN module.
1. Remove 1 piece of tape and disconnect the MAIN & AUX antenna.
2. And open the two latches to pop the MINI PCI MODULE up then pull it out.
Memor y Module MEMORY
MODULE The S62 Series Notebook does not have RAM onboard. There is one SO-DIMM
sockets for installing SO-DIMM RAM. It can upgrade the total memory size up to 1GB .
Removing Memory module MEMORY
REMOVAL
1. Remove 2 screws (M2.5*4L (K)) , then remove the DIMM door.
M2.5*4L
2 - 4
Disassembly procedure
2. Open the 2 latches aside (No. 1, 2), which will pop the memory module up to an
angle of 30 °, then pull out the memory module in that angle (No. 3).
1
3 2
30o
CPU Module CPU MODULE
The illustrations below show how to remove the CPU module from the notebook.
Removing CPU Module CPU
REMOVAL
1. Remove 2 screws (M2.5*4L (K )), then remove the CPU door.
2. Remove 4 screws (M2*3L (K)) by order.
1
2 3
4
M2.5*4L
M2*3L
2 - 5
Disassembly procedure
3. Disconnect the Fan cable and remove 2 screws (M2.5*4L (K)) then take away the
CPU thermal module.
4. Turn the non-removable screw here 180 degrees counter-clockwise to loosen the
CPU.
5. Squeeze the vacuum handling pump and use it to lift the CPU away.
M2.5*4L
Unlock
L
O
2 - 6
Disassembly procedure
ODD Module OPTICAL
DRIVE
DEVICE The illustration below shows how to remove the ODD module.
1. Remove 1 screw (M2.5*4L (K)).
ODD
REMOVAL
M2.5*4L
2. Push the ODD Module out by a pair of tweezers.
2 - 7
Disassembly procedure
Keyboard KEYBOARD The illustration of below shows how to remove the keyboard.
Removing Keyboard K/B REMOVAL
1. Push the 4 latches in (No.1, No.2, No.3, No.4) with a pair of tweezers or a
single-slotted screwdriver and lift the keyboard plate up.
2. Lay the keyboard down over the Top case. *Do not remove the keyboard yet.
The keyboard cable is still attached.
3. Disconnect the FPC connecto r by a pair of tweezers.
2 1 4 3
2 - 8
Disassembly procedure
Removing Keyboard Cable CABLE
1. Use a flexible connector tool to unlock the cable connecto r on both ends (no. 1). REMOVAL
2. Carefully pull out the keyboard cabl e (no. 2) with a pair of tweezers.
3. Lock the connector (no. 3) again to avoid possible breakage.
1. Unlock
2. Cable out
3.
1. Unlock
3.
4. Remove keyboard from the top case.
Top Case Module
The illustrations below show how to disassemble and remove the top case module of the notebook.
The module contains the top case itself.
TOP CASE
MODULE
Removing top Case Module
HINGE COVER
REMOVAL 1. Remove the MIDDLE cover.
2 - 9