Apple macbook pro 17 inch early 2009 User Manual
Have a look at the manual Apple macbook pro 17 inch early 2009 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
MacBook Pro (17-inch, Early 2009) Take Apart — Heatsink 201 2010-06-11 Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #0 or #1 screwdriver • Thermal grease syringe • Alcohol pads • Black stick Removal Caution: Hold heatsink by edges, not by the heat pipes: 1 Disconnect the thermal sensor cable, if provided, using a black stick. Note: Some heatsink models do not include a sensor cable.
MacBook Pro (17-inch, Early 2009) Take Apart — Heatsink 202 2010-06-11 2 Remove 8 (8.35-mm) 922-8799 screws. 3 Keeping heatsink parallel to logic board, gently wiggle the heatsink to loosen the bond to the board.
MacBook Pro (17-inch, Early 2009) Take Apart — Heatsink 203 2010-06-11 4 With a black stick, scrape off thermal grease and use alcohol pad to clean thermal pads and chips. Replacement Important: New heatsinks include pre-applied thermal grease. Follow steps 1-2 only if re- installing the original heatsink. 1 Caution: The syringe contains enough thermal grease for 3 chips. Use a pen to mark the syringe in thirds.
MacBook Pro (17-inch, Early 2009) Take Apart — Heatsink 204 2010-06-11 2 Inject 1/3 of grease on the center of each chip 3 Important: Connect the thermal sensor cable, if provided. The computer will not function with the sensor disconnected. 4 Lower the heatsink over the logic board. 5 Install heatsink screws in order, 1/2 way first, then tighten the rest of the way.
MacBook Pro (17-inch, Early 2009) Take Apart — Left Speaker 205 2010-06-11 First Steps Remove: • Bottom case • Memory • Fans • Logic board Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. Left Speaker
MacBook Pro (17-inch, Early 2009) Take Apart — Left Speaker 206 2010-06-11 Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver • Black stick Removal Note: Do not touch the soft speaker cone. 1 Disconnect 2 cables: • microphone • speaker
MacBook Pro (17-inch, Early 2009) Take Apart — Left Speaker 207 2010-06-11 2 Remove 2 (8.1-mm) 922-8720 screws. Replacement Note: If replacing the speaker, transfer microphone cable to replacement speaker.
MacBook Pro (17-inch, Early 2009) Take Apart — Microphone Cable 208 2010-06-11 First Steps Remove: • Bottom case • Memory • Fans • Logic board • Left speaker Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Black stick Microphone Cable
MacBook Pro (17-inch, Early 2009) Take Apart — Microphone Cable 209 2010-06-11 Removal Note: Do not touch the soft speaker cone. 1 Unroute microphone cable. Replacement Note: When transfering microphone cable to speaker, make sure cable is recessed within speaker body. 2 Turn over speaker, and carefully pry up the microphone gasket.
MacBook Pro (17-inch, Early 2009) Take Apart — Express Card Cage 210 2010-06-11 First Steps Remove: • Bottom case • Memory • Fans • Logic board Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. Express Card Cage