Apple macbook pro 17 inch early 2009 User Manual
Have a look at the manual Apple macbook pro 17 inch early 2009 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
MacBook Pro (17-inch, Early 2009) Take Apart — Bluetooth Card and Holder 141 2010-06-11 Replacement 1 Remove any adhesive residue left on optical drive from Bluetooth holder. 2 Assemble Bluetooth card and bracket in holder. 3 Install Bluetooth holder on optical drive so that • screw holes align • holder aligns with cushion on optical drive
MacBook Pro (17-inch, Early 2009) Take Apart — Camera Cable Guide 142 2010-06-11 First Steps Remove: • Bottom case Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. Camera Cable Guide
MacBook Pro (17-inch, Early 2009) Take Apart — Camera Cable Guide 143 2010-06-11 Tools Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver • Black stick Removal 1 Remove 2 (8-mm) 922-8645 screws. Replacement Note: Be sure to anchor the ground tab when reinstalling the screw closest to the display clutch cover. 2 Remove the camera cable guide.
MacBook Pro (17-inch, Early 2009) Take Apart — LVDS Cable Guide 144 2010-06-11 First Steps Remove: • Bottom case Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. LVDS Cable Guide
MacBook Pro (17-inch, Early 2009) Take Apart — LVDS Cable Guide 145 2010-06-11 Tools Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver • Black stick Removal 1 Locate LVDS cable. 2 To disconnect LVDS cable, grasp black tab and gently swing LVDS lock bar up and back to unlock the cable. 3 Slide cable out of connector by pulling the cable. Do not pull the black tab or lock bar.
MacBook Pro (17-inch, Early 2009) Take Apart — LVDS Cable Guide 146 2010-06-11 4 Remove 2 (8-mm) 922-8645 screws. Replacement Note: Be sure to anchor the ground tab when reinstalling the screw closest to the display clutch cover. 5 Remove the LVDS cable guide.
MacBook Pro (17-inch, Early 2009) Take Apart — Fans 147 2010-06-11 First Steps Remove: • Bottom case Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. Fans
MacBook Pro (17-inch, Early 2009) Take Apart — Fans 148 2010-06-11 Tools Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver • Black stick Removal 1 Disconnect each fan cable. 2 Remove 6 (3.1-mm) 922-8754 screws. 3 Remove fan(s) from top case. Replacement Note: To identify the fans for ordering parts, • Right Fan is closest to optical drive • Left Fan is closest to MagSafe power connector
MacBook Pro (17-inch, Early 2009) Take Apart — Optical Drive 149 2010-06-11 First Steps Remove: • Bottom case Caution: The optical drive is very fragile. Handle by the sides only. Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. Optical Drive
MacBook Pro (17-inch, Early 2009) Take Apart — Optical Drive 150 2010-06-11 Tools Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver • Torx T6 screwdriver Removal 1 With a black stick, carefully pry optical cable straight up and off logic board. Important Replacement Note: Install flex cable vertically onto logic board connector. If not, logic board pins could bend, causing an undetected disc symptom. 2 Remove 4 screws: • 1 Torx T6 (3.1-mm) 922-xxxx at top case boss • 3 Phillips #00 (3.5- mm) 922-8719 at optical drive 3 Disconnect remaining cables: • Bluetooth antenna • Camera cable (2)