Apple macbook pro 17 inch early 2009 User Manual
Have a look at the manual Apple macbook pro 17 inch early 2009 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
MacBook Pro (17-inch, Early 2009) Take Apart — Right Speaker/Subwoofer 181 2010-06-11 First Steps Remove: • Bottom case • Optical drive Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. Right Speaker/Subwoofer
MacBook Pro (17-inch, Early 2009) Take Apart — Right Speaker/Subwoofer 182 2010-06-11 Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Black stick • Phillips #00 screwdriver Removal 1 Remove 3 screws: • 1 (2.6-mm) 922-8662 • 2 (12.4-mm) 922-8982 2 Disconnect speaker cable from logic board.
MacBook Pro (17-inch, Early 2009) Take Apart — Logic Board 183 2010-06-11 First Steps Remove: • Bottom case • Memory • Fans Before you begin this procedure, disconnect the battery from the logic board. Failure to do so could damage the computer. Logic Board
MacBook Pro (17-inch, Early 2009) Take Apart — Logic Board 184 2010-06-11 Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Black stick • Phillips #00 screwdriver Removal 1 Remove 4 screws: • 2 (3.1-mm) 922-8754 • 2 (1.8-mm) 922-8983 2 Lift away 2 shields.
MacBook Pro (17-inch, Early 2009) Take Apart — Logic Board 185 2010-06-11 3 Refer to Connector Types to carefully disconnect 11 cables: • LVDS • keyboard backlight • camera • optical drive • right speaker • IR/sleep • trackpad • keyboard • Express card cage • hard drive connector • battery indicator light (BIL) 4 Remove 6 (3.15-mm) 922-8754 screws.
MacBook Pro (17-inch, Early 2009) Take Apart — Logic Board 186 2010-06-11 5 Tilt logic board away from ports. 6 Holding board by edges, tilt it up and disconnect MagSafe connector.
MacBook Pro (17-inch, Early 2009) Take Apart — Logic Board 187 2010-06-11 Replacement If replacing the logic board with a new one, transfer: • left speaker • microphone cable • heatsink • memory 1 Install MagSafe board connector. 2 Keeping all cables away, install logic board screws in order shown. 3 Connect cables following the instructions in Connector Types.
MacBook Pro (17-inch, Early 2009) Take Apart — Trackpad 188 2010-06-11 First Steps Remove: • Bottom case • Battery • Memory • Fans • Logic board Trackpad Kit 922-9009 includes: • trackpad • black label • 10 bottom case screws (3-mm and 13.5-mm) • 6 Phillips #000 (2-mm) screws • 1 tri-lobe #0 set screw • 2 metal flexures Tools • ESD wrist strap and mat • Sticky (Post-It) notes • Black stick • Large tri-lobe #0 screwdriver (922-8991) • Magnetized Phillips #00 screwdriver • Magnetized Phillips #000 screwdriver • Magnetized Torx T6 screwdriver Trackpad
MacBook Pro (17-inch, Early 2009) Take Apart — Trackpad 189 2010-06-11 Removal 1 Remove 6 #000 (2-mm) Phillips screws from flexures. Discard old screws; they lose their ability to hold securely if reused. 2 Remove 4 T6 (4-mm) screws from flexure stiffeners. Keep screws. 3 Remove 1 tri-lobe set screw. Discard old screw. 4 Slide out stiffeners and flexures. Keep stiffeners. 5 Dispose of flexures (thin metal pieces); they are matched to each individual trackpad by thickness.
MacBook Pro (17-inch, Early 2009) Take Apart — Trackpad 190 2010-06-11 6 Carefully tilt up keyboard mylar as you peel up trackpad flex cable from adhesive on mounting ramp. Note: If a bar code label stays stuck to adhesive, be sure to remove it. 7 Hold trackpad and flex cable, and press down on edge closest to keyboard. 8 Slide trackpad down and back to clear supports in front edge of top case.