Home > Apple > Notebook > Apple macbook pro 15 inch mid 2010 User Manual

Apple macbook pro 15 inch mid 2010 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Apple macbook pro 15 inch mid 2010 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							MacBook Pro (15-inch, Mid 2010) Take Apart — AirPort/Bluetooth Card With Holder 141 2010-12-15
    6 If you are removing 
    card holder from top 
    case, use a black stick 
    or needlenose pliers 
    to pry cables from the 
    holder’s channels, and 
    remove card holder 
    from case.
    Replacement Note: 
    Reroute cables in 
    cardholder as shown.  
    						
    							MacBook Pro (15-inch, Mid 2010) Take Apart — AirPort/Bluetooth Card With Holder 142 2010-12-15
    Replacement Note: Make 
    sure tab on holder inserts 
    under edge of black 
    bracket on inside of top 
    case.  
    						
    							MacBook Pro (15-inch, Mid 2010) Take Apart — Optical Drive 143 2010-12-15
    First Steps
    Do the following:
    • Remove bottom case
    • Remove battery
    • Remove AirPort/
    Bluetooth flex cable
    • Rotate AirPort/
    Bluetooth card holder 
    back from bottom case
    Caution: The optical drive 
    is very fragile. Handle by 
    the sides only.
    Tools
    • Clean, soft, lint-free 
    cloth
    • ESD wrist strap and 
    mat
    • Magnetized Phillips 
    #00 screwdriver
    • Black stick
    Optical Drive  
    						
    							MacBook Pro (15-inch, Mid 2010) Take Apart — Optical Drive 144 2010-12-15
    Removal
    1 Remove 3 (3 mm) 
    922-8719 screws. 
    2 With a black stick, 
    carefully pry optical 
    cable straight up and 
    off logic board.
    Important 
    Replacement Note: 
    Install flex cable 
    vertically onto logic 
    board connector. 
    Failure to do so could 
    bend logic board pins 
    and cause the system 
    not to detect a disc 
    when inserted.
    3 Tilt optical drive 
    up, pull it back far 
    enough to clear 
    camera cable guide, 
    and remove drive 
    from bottom case.  
    						
    							MacBook Pro (15-inch, Mid 2010) Take Apart — Optical Drive Data Cable 145 2010-12-15
    First Steps
    Do the following:
    • Remove bottom case
    • Remove battery
    • Remove AirPort/
    Bluetooth flex cable
    • Rotate AirPort/
    Bluetooth card holder 
    back from bottom case
    • Remove optical drive
    Caution: The optical drive 
    is very fragile. Handle by 
    the sides only.
    Tools
    • Clean, soft, lint-free 
    cloth
    • ESD wrist strap and 
    mat
    • Black stick
    Optical Drive Data Cable  
    						
    							MacBook Pro (15-inch, Mid 2010) Take Apart — Optical Drive Data Cable 146 2010-12-15
    Removal
    With a black stick or 
    fingernail, carefully wiggle 
    flex cable off optical drive.  
    						
    							MacBook Pro (15-inch, Mid 2010) Take Apart — Camera Cable Guide 147 2010-12-15
    First Steps
    Do the following:
    • Remove bottom case
    • Remove battery
    • Remove AirPort/
    Bluetooth flex cable
    • Rotate AirPort/
    Bluetooth card holder 
    back from bottom case
    Tools
    • Clean, soft, lint-free 
    cloth
    • ESD wrist strap and 
    mat
    • Magnetized Phillips 
    #00 screwdriver
    Camera Cable Guide  
    						
    							MacBook Pro (15-inch, Mid 2010) Take Apart — Camera Cable Guide 148 2010-12-15
    Removal
    1 Remove 8.1 mm  
    (922-9107) screw.
    2 Remove cable guide 
    assembly from case.
    Important: When 
    removing the camera 
    cable guide, do NOT 
    remove the screw 
    that secures the 
    guide’s grounding 
    clip. The clip is 
    delicate and should 
    remain with the 
    guide. If the clip is 
    damaged, install a 
    new cable guide. 
    Replacement Note: Be 
    sure to anchor ground tab 
    when reinstalling cable 
    guide. Check that 
    • guide’s clamp secures 
    camera cable
    • ground tab attached 
    to cable is positioned 
    on top of holder’s 
    screw hole
    • screw holes align  
    						
    							MacBook Pro (15-inch, Mid 2010) Take Apart — Camera Cable Guide 149 2010-12-15
    Replacement Note: Be 
    sure grounding clip 
    fingers contact the top 
    case.  
    						
    							MacBook Pro (15-inch, Mid 2010) Take Apart — LVDS Cable Guide 150 2010-12-15
    First Steps
    Remove:
    • Bottom case
    • Battery
    Tools
    • Clean, soft, lint-free 
    cloth
    • ESD wrist strap and 
    mat
    • Magnetized Phillips 
    #00 screwdriver
    LVDS Cable Guide  
    						
    All Apple manuals Comments (1)

    Related Manuals for Apple macbook pro 15 inch mid 2010 User Manual