Apple macbook pro 15 inch mid 2010 User Manual

							MacBook Pro (15-inch, Mid 2010) Take Apart — Battery 121 2010-12-15
3 Using a black stick, 
pry cable from logic 
board connector. 
Replacement
1 Slide front edge of 
battery under 3 tabs.
2 Connect battery 
cable and install 3 
trilobe screws in order 
shown.    
						

							MacBook Pro (15-inch, Mid 2010) Take Apart — Battery 122 2010-12-15
Note: If installing a 
new battery, attach 
the new battery label 
(refer to battery label 
inbox instructions).
3 Press battery indicator 
light button to check 
charge level.   
						

							MacBook Pro (15-inch, Mid 2010) Take Apart — Hard Drive and Bracket 123 2010-12-15
First Steps
Remove:
• Bottom case
• Battery
Caution: Make sure data 
is backed up before 
removing the hard drive.
Tools
• Clean, soft, lint-free 
cloth
• ESD wrist strap and 
mat
• Magnetized Phillips 
#00 screwdriver
Hard Drive and Bracket  
						

							MacBook Pro (15-inch, Mid 2010) Take Apart — Hard Drive and Bracket 124 2010-12-15
Removal
1 Loosen 2 captive 
screws to remove 
bracket. 
2 Lift out bracket.
Replacement Note: Make 
sure 2 rubber grommets 
are included in bracket 
before installing it.  
						

							MacBook Pro (15-inch, Mid 2010) Take Apart — Hard Drive and Bracket 125 2010-12-15
3 Use pull tab to tilt 
hard drive out. 
 
4 Hold hard drive by 
the sides only.
5 Disconnect hard drive 
connector.   
						

							MacBook Pro (15-inch, Mid 2010) Take Apart — Hard Drive and Bracket 126 2010-12-15
6 Follow safe handling: 
• Do not press drive
• Do not touch 
connector
• Do not touch circuitry  
						

							MacBook Pro (15-inch, Mid 2010) Take Apart — Hard Drive and Bracket 127 2010-12-15
Replacement
1 Touch a metal surface 
to discharge static 
electricity. 
2 Make sure 4 Torx T6 
mounting screws are 
installed on the drive.  
 
If your replacement 
drive does not have 
mounting screws, 
transfer them from 
the old drive. (Screws 
are not offered 
separately.)  
						

							MacBook Pro (15-inch, Mid 2010) Take Apart — Hard Drive and Bracket 128 2010-12-15
3 Attach connector and 
insert hard drive at an 
angle making sure 
mounting screws are 
inserted into front 
bracket.
4 Replace bracket and 
tighten 2 captive 
screws.  
						

							MacBook Pro (15-inch, Mid 2010) Take Apart — Hard Drive and Bracket 129 2010-12-15
Reinstalling Software That Came with the Computer
Use the software install discs that came with the computer to reinstall Mac OS X and any 
applications that came with the computer. Choose either “Archive and Install,” which saves the 
existing files and settings, or “Erase and Install,” which erases all the data.
Important: Apple recommends backing up data on the hard disk before restoring software. 
Because the “Erase and Install” option erases the hard disk, you should back up essential files 
before installing Mac OS X and other applications. Apple is not responsible for any lost data.
Installing Mac OS X 
To install Mac OS X, follow these steps: 
1.  
						

							MacBook Pro (15-inch, Mid 2010) Take Apart — Hard Drive/IR/Sleep Indicator Cable 130 2010-12-15
First Steps
Remove:
• Bottom case
• Battery
• Hard drive
Caution: Make sure data 
is backed up before 
removing the hard drive.
Tools
• Clean, soft, lint-free 
cloth
• ESD wrist strap and 
mat
• Black stick
• Magnetized Phillips 
#00 screwdriver
Hard Drive/IR/Sleep Indicator 
Cable