Apple macbook pro 15 inch mid 2009 User Manual

							MacBook Pro (15-inch, Mid 2009) Manual Updates — Updated 10 June 2009 11 2010-12-15
Views
• Added screw photos to Screw Chart
• Added nine Screw Location Diagrams
Updated 10 June 2009
Take Apart:
• Added battery as “First Step” to various procedures
Apple Technician Guide Introduced 08 June 2009  
						

							MacBook Pro (15-inch, Mid 2009) About This Guide — Feedback 12 2010-12-15
Feedback
We want your feedback to help improve this and future Technician Guides!
Please email any comments to: 
 [email protected]  
						

							© 2009 Apple Inc. All rights reserved.
 Apple Technician Guide
Basics
MacBook Pro (15-inch, Mid 2009)   
						

							MacBook Pro (15-inch, Mid 2009) Basics — Overview 14 2010-12-15
Overview
The MacBook Pro (15-inch, Mid 2009) computer features a 2.66, 2.8, or 3.06 GHz Intel Core 2 Duo 
processor, NVIDIA GeForce 9400M integrated graphics processor, and an SD Card slot. Refer to 
more features below.
Identifying Features
The main features and service differences include:
• SD card slot
• Intel 2.66 GHz, 2.8GHz, or 3.06 GHz processor
• Advanced built-in battery that last up to 7 hours on a single charge 
• Select models 9600M GT with 256MB or 512MB of GDDR3 memory
Product Configurations 
For product configurations, refer to Applecare Tech Specs: http://support.apple.com/specs/  
						

							MacBook Pro (15-inch, Mid 2009) Basics — Overview 15 2010-12-15
Note About Images in This Manual
Because a pre-production or very similar model was used for most of the images shown in 
this manual, you may notice small differences in appearance between the image pictured and 
the computer you are servicing. However, although the appearance may differ, the steps and 
sequence are the same unless noted.  
Screw sizes shown are approximate and indicate the total length including the screw head.
Battery Precaution
This computer contains an internal-only battery that is serviceable by Apple-authorized service 
providers only. Tamper-proof screws are employed to prevent customers from attempting to 
remove it.  Note: Before you begin any procedure, disconnect the battery from the logic board. 
Failure to do so could damage the computer.
Battery Removal Tool
To remove the security screws holding the battery in place, you will need a special tool, the Torx 
Plus Tamper 6 screwdriver, Apple part number 922-9101, available through GSX.    
						

							MacBook Pro (15-inch, Mid 2009) Basics — Overview 16 2010-12-15
Service Fixture
Use the custom-made service fixture (922-9102) to provide support to the logic board 
whenever removing and replacing the left fan and heatsink. Failure to use the service fixture 
will flex the logic board and strain components on the board. 
The fixture is two-sided; one side is for fan removal and installation and the other side is for 
heatsink removal and installation. The graphics below demonstrate the logic board positioned 
on each side of the fixture with the screws highlighted. Review the movie for more information. 
Fan installation and removal side
Heatsink installation and removal side   
						

							MacBook Pro (15-inch, Mid 2009) Basics — Serial Number Location 17 2010-12-15
Serial Number Location
Serial Number on Bottom Case
Turn over the computer to see the serial number etched on the bottom case near the hinge.  
						

							MacBook Pro (15-inch, Mid 2009) Basics — Serial Number Location 18 2010-12-15
Transferring the Serial Number
When replacing a bottom case, retain the customer’s bottom case until the repair is complete. 
Before installing the replacement bottom case, use a fine-tip permanent marker to write the 
original serial number legibly in uppercase box letters directly onto the inside of the new 
bottom case.
CAUTION: Take great care in deciphering the small typeface of the etched serial number 
on the bottom case. You might need a magnifying glass to see it clearly. It is imperative 
that you transfer the correct alphanumeric characters. Keep in mind that Apple serial 
numbers always use the numbers 1 and 0 instead of the Roman letters “I” and “O.”  
						

							MacBook Pro (15-inch, Mid 2009) Basics — General Information 19 2010-12-15
General Information
Required Tools 
Caution: To prevent scratches or other cosmetic damage to the computer housing, use a soft 
cloth as a protective layer when removing and installing the external screws.
The following tools are required to service the computer: 
• Clean, soft, lint-free cloth
• ESD wrist strap and mat
• Magnetic Phillips #00 screwdriver
• Magnetic Phillips #000 screwdriver (preferably with a long handle)
• Torx T6 screwdriver 
• Torx Plus® Tamper 6 screwdriver, for battery removal (Apple part number 922-9101)
• Logic/Fan/Heatsink service fixture (part number 922-9102)
• Black stick (Apple probe tool, part number 922-5065) or other nonconductive nylon or 
plastic flatblade tool
• Thermal grease (Apple thermal compound syringe, part number 922-7144)
• Alcohol wipes
• Foam wedge fixture for display assembly removal (part number 922-8779)
• Kapton tape
• Tweezers, ESD safe, extra fine points, for flat cable replacement
Refer to Knowledge Base article “Hand Tools for Desktop and Portable Repairs--AP/CA/EU/JP/
LA/US” to purchase tools:
http://docs.info.apple.com/article.html?artnum=500200
In addition, the following software programs are required for troubleshooting: 
• Apple Service Diagnostic (ASD), version 3S132
• Apple Hardware Test, version 3A171  
						

							MacBook Pro (15-inch, Mid 2009) Basics — General Information 20 2010-12-15
Display Panels
Customers can choose the standard glossy display (661-5215) or an optional antiglare display 
(661-5295). The antiglare display became a CTO option in August 2009.
External difference: 
(A) Glossy display has a black border and the glass runs edge-to-edge 
(B) Antiglare display has a silver bezel, no glass, and a matte finish. 
Internal difference: 
The glossy display models do not have a Bluetooth card and antenna in the top left corner.