Apple macbook 13 inch aluminum late 2008 User Manual
Have a look at the manual Apple macbook 13 inch aluminum late 2008 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Top Case 211 2010-06-15 • battery power cable • battery connector cover • hard drive connector cable • hard drive front bracket with IR/sleep cable • Kensington lock Replacement Note: Before assembling the computer, be sure to first transfer the following parts to the new top case: • Center bracket • MagSafe board Replacement Note: When replacing a top case, retain the customer’s top case until the repair is complete. Before installing the replacement top case, peel up the serial number label from the original top case and transfer it to the replacement.
© 2009 Apple Inc. All rights reserved. Apple Technician Guide Additional Procedures MacBook (13-inch, Aluminum, Late 2008)
MacBook (13-inch, Aluminum, Late 2008) Additional Procedures — Hinge Replacement and Alignment 213 2010-06-15 Overview First Steps Order hinge alignment kit (Apple part # 076-1357) that includes one set of the left and right hinges. Remove: • Access door • Battery • Bottom case • Camera cable guide • LVDS cable guide • Display assembly • Display clutch cover Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • plastic alignment guide (Apple part # 922-9272) • Torx T6 screwdriver Hinge Replacement and Alignment Storing the computer upright on the hinge edge can result in the display inadvertently opening. To prevent further occurrences, follow this procedure to replace and align the hinges. When replacing hinges, make sure they are properly aligned to minimize any gaps where the display housing mounts to the top case.
MacBook (13-inch, Aluminum, Late 2008) Additional Procedures — Hinge Replacement and Alignment 214 2010-06-15 Procedure 1 Insert alignment guide between flat bottom of hinge and raised black trim on display clamshell. 2 If gap between hinge and trim is out of tolerance, adjust clutch by removing 2 T6 mounting screws. 3 Move clutch slightly until gap is 5.7mm +/- 0.1mm, the same height as the alignment guide. 4 Reinstall 2 screws, and reassemble computer. 5 Verify that display opens and closes completely and there are no gaps between top case and display housing.
© 2008 Apple Inc. All rights reserved. Apple Technician Guide Views MacBook (13-inch, Aluminum, Late 2008)
MacBook (13-inch, Aluminum, Late 2008) Views — Exploded Views 216 2010-06-15 Exploded Views Main Assembly, 1 of 2 Important: Replace parts like-for-like. For parts with more than one part number, enter the product serial number in GSX to determine the compatible part.
MacBook (13-inch, Aluminum, Late 2008) Views — Exploded Views 217 2010-06-15 Main Assembly, 2 of 2 Important: Replace parts like-for-like. For parts with more than one part number, enter the product serial number in GSX to determine the compatible part.
MacBook (13-inch, Aluminum, Late 2008) Views — Exploded Views 218 2010-06-15 Display Assembly Important: Replace parts like-for-like. For parts with more than one part number, enter the product serial number in GSX to determine the compatible part.
MacBook (13-inch, Aluminum, Late 2008) Views — External Views 219 2010-06-15 External Views Port View A = MagSafe Power B = Gigabit Ethernet C = USB 2.0 (1 high powered) D = Mini DisplayPort E = Combo Digital/Analog Audio In F = Combo Digital/Analog Audio Out G = Security Slot H = Battery Indicator Light Button
MacBook (13-inch, Aluminum, Late 2008) Views — Screw Chart 220 2010-06-15 Screw Chart 076-1320 Phillips #00 Included in Logic Board Kit 076-1326 Phillips #00 Included in AirPort Card Kit: antenna (4), card (2), cable clip (1) 922-8642 Spring Heatsink springs (4) 922-8644 Phillips #00 Center bracket, fan, optical drive, keyboard flex bracket 922-8645 Phillips #00 Fan, LVDS cable guide, MagSafe board 922-8648 Phillips #00 Center bracket (top) 922-8649 / 922-8973 Phillips #00 Hard drive front bracket 922-8650 / 922-8974 Phillips #00 Camera cable guide, right speaker 922-8651 Phillips #00 Battery connector cover (2) 922-8652 Phillips #00 Battery connector cover (1) 922-8653 Phillips #00 Bottom case to mid wall 922-8654 Phillips #00 shoulder Logic board (1)