Apple macbook 13 inch aluminum late 2008 User Manual
Have a look at the manual Apple macbook 13 inch aluminum late 2008 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Heatsink 201 2010-06-15 2 Inject 1/3 of grease on each microprocessor. 3 Important: Connect the thermal sensor. 4 Lower the heatsink over the logic board.
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Microphone Cable 202 2010-06-15 First Steps Remove: • Access door • Battery • Bottom case • Memory • Fan • Keyboard flex bracket • Logic board Caution: Do not strain microphone cable. Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetic Phillips #00 screwdriver • Black stick • Pencil with an eraser Microphone Cable
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Microphone Cable 203 2010-06-15 Removal 1 Remove 2 screws: • 7 mm (922-8645) • 5.5 mm (922-8658) 2 Remove LVDS cable guide. Replacement Note: When installing the LVDS cable guide, seat the locator pin first. 3 Use black stick to pry up microphone gasket. 4 Remove any adhesive remnants from top case.
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Microphone Cable 204 2010-06-15 Replacement 1 Remove paper backing from gasket. 2 Use a pencil eraser to seat the microphone gasket in the top case. 3 Make sure the microphone cable is not pinched when installing the LVDS cable guide. 4 To route the microphone cable to the board, refer to Logic board.
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Center Bracket 205 2010-06-15 First Steps Remove: • Access door • Battery • Bottom case • Memory • Camera cable guide • Optical drive • Fan • Keyboard flex bracket • Logic board Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetic Phillips #00 screwdriver Removal 1 Remove 2 screws: • 10-mm (922-8648) at top • 6-mm (922-8644) 2 Remove center bracket. Center Bracket
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Kensington Lock 206 2010-06-15 First Steps Remove: • Access door • Battery • Bottom case • Mid wall Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetic Phillips #00 screwdriver Kensington Lock
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Kensington Lock 207 2010-06-15 Removal 1 Remove 2 (3 mm) screws (screw part number not offered). 2 Lift out lock. Note that the lock includes the plastic piece and metal shield.
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Hard Drive Front Bracket with IR/Sleep Cable 208 2010-06-15 First Steps Remove: • Access door • Battery • Hard drive bracket • Hard drive • Bottom case • Mid wall • Camera cable guide • Optical drive • Hard drive connector cable Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver • Black stick • Tweezers (optional) Hard Drive Front Bracket with IR/Sleep Cable
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Hard Drive Front Bracket with IR/Sleep Cable 209 2010-06-15 Removal 1 Note routing of IR/ sleep light cable. 2 Remove 2 (3.3-mm) 922-8649 screws. 3 Tilt bracket away from top case. 4 Without straining cable, disconnect IR cable connector. 5 Peel up cable from top case. Replacement Note: Peel off adhesive backing from cable, and press cable onto top case. Replacement Caution: The narrow end of the cable can be easily torn if mishandled. You may find it helpful to use two plastic tweezers to insert it into the connector. Be sure to insert it squarely to prevent an SMC short or startup issue.
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Top Case 210 2010-06-15 First Steps Remove: • Access door • Battery • Hard drive bracket • Hard drive • Bottom case • Memory • Mid wall • Battery cable guide • Camera cable guide • LVDS cable guide • Display assembly • Optical drive • Right speaker/ subwoofer • Fan • Keyboard flex bracket • Logic board • Microphone cable • MagSafe board • Center bracket Tools No tools are required for this procedure. Removal With the first steps completed, the top case is the remaining part. The top case includes: • battery indicator light board and cable Top Case