Home > Apple > Personal Computer > Apple mac pro server mid 2010 User Manual

Apple mac pro server mid 2010 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Apple mac pro server mid 2010 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Mac Pro (Mid 2010) Take Apart — Optical Drive Cable Harness 211 2010-12-06
    Removal
    1 Insert backplane-
    board connectors on 
    cable harness through 
    opening in media 
    shelf.
    2 Remove cable harness 
    from enclosure.  
    						
    							Mac Pro (Mid 2010) Take Apart — Bluetooth Antenna Board with Cable 212 2010-12-06
    First Steps
    Open computer, lay it 
    down with access side 
    facing up, and remove:
    • All hard drives and 
    drive carriers
    • Optical drive carrier 
    and optical drives
    • PCIe fan
    • All PCI Express cards
    • Processor tray
    • Processor cage
    • Front-panel-board-to-
    backplane-board cable
    • Backplane board
    Tools
    • ESD wrist strap
    • Jeweler’s Phillips 
    screwdriver
    • Long-handled, 
    magnetized T8 torx 
    screwdriver
    Bluetooth Antenna Board with 
    Cable  
    						
    							Mac Pro (Mid 2010) Take Apart — Bluetooth Antenna Board with Cable 213 2010-12-06
    Removal
    1 Remove antenna 
    board mounting 
    screw.
    2 Remove tape holding 
    Bluetooth cable to 
    enclosure.
    Note: If a metal loop is 
    attached to Bluetooth 
    antenna cable, remove 
    enclosure screw that 
    secures loop. See 
    Reassembly steps 3-6.
    3 Gently grasp 
    Bluetooth antenna 
    board and pull it out 
    of its mounting.
    4 Remove antenna 
    board and cable from 
    enclosure.  
    						
    							Mac Pro (Mid 2010) Take Apart — Bluetooth Antenna Board with Cable 214 2010-12-06
    Reassembly
    1 Insert replacement 
    antenna board at 
    an angle into its 
    mounting. Then 
    straighten out board 
    and insert fully.
    2 Replace antenna 
    board mounting 
    screw.  
    						
    							Mac Pro (Mid 2010) Take Apart — Bluetooth Antenna Board with Cable 215 2010-12-06
    Note: A metal grounding 
    loop is attached to the 
    replacement antenna 
    board cable. Do the 
    following to ground the 
    loop to the enclosure:
    3 Using a T8 torx 
    screwdriver, remove 
    the enclosure screw 
    indicated.
    4 Place washer 
    (included with 
    replacement antenna 
    board) face up over 
    screw hole.
    5 Place grounding loop 
    over washer.
    6 Reinstall enclosure 
    screw.
    7 Replace tape that 
    secures cable to 
    enclosure. If you 
    cannot reuse the 
    original tape, use 
    Kapton tape.  
    						
    							© 2010 Apple Inc. All rights reserved.
     Apple Technician Guide 
    Views
    Mac Pro (Mid 2010)   
    						
    							Mac Pro (Mid 2010) Views — Exploded Views 217 2010-12-06
    Exploded Views
    Exploded View 1
    Hard Drive Carrier922-8899
    Optical Drive Carrier Access Door
    922-8902
    Hard Drive
    1 TB 661-5678
    2 TB 661-5679
    Optical Drive
    661-5681
    Optical Drive Cable
    922-8891
    Rear Processor
    Cage Fan
    922-8886
    Processor Cage
    922-8893
    AirPort Card
    661-4907
    Bluetooth Card
    922-9716
    Power Supply
    661-5449 
    PCIe Cards
    661-5006
    661-5007
    661-5121
    MacPro Raid Card
    661-5012
    Enclosure
    922-9631
    Front Processor Cage Fan922-8885
    Speaker
    922-8887
    Front Panel Board 922-8889
    Front-Panel-Board-to-
    Backplane-Board Cable 922-8888
    PCIe Fan
    922-9719
    Battery
    922-8892
    Backplane Board 661-5706 Graphics Cards
    ATI Radeon HD 5770
    661-5718 (BTR)
    ATI Radeon HD 5780
    661-5719 (CTO)
    Bluetooth Antenna
    Board with Cable Kit
    076-1365
    SSD Carrier Adapter
    922-9629
    Solid State Drive 512 GB
    661-5680  
    						
    							Mac Pro (Mid 2010) Views — Exploded Views 218 2010-12-06
    Exploded View 2
    Processor Heatsink, Single076-1338
    Processor Heatsink, Dual, A 076-1367
    Processor Heatsink, Dual, B 076-1368
    Processor, Dual
    2.40 GHz 661-5712
    2.66 GHz 661-5713
    2.93 GHz 661-5714
    Processor Board, 
    Dual
    661-5708
    Processor, Single
    2.80 GHz 661-5709
    3.20 GHz 661-5710 3.33 GHz 661-5711
    Processor Board, Single 661-5707
    Processor Tray Support Plate 076-1344
    UDIMM
    1 GB, ECC, 1333 MHz 661-5715
    2 GB, ECC, 1333 MHz 661-5716 4 GB ECC, 1333 MHz 661-5717  
    						
    							Mac Pro (Mid 2010) Views — External Views 219 2010-12-06
    External Views
    Front View
    Optical driveHeadphone jackStat\fs light
    Po\ber b\ftton
    FireWire 800 ports\S (2)
    Second optical driv\Se (optional)
    USB 2.0 ports (2)  
    						
    							Mac Pro (Mid 2010) Views — External Views 220 2010-12-06
    Rear View 1
    Power socketLocking latch
    US\f 2.0 \borts (3)
    FireWire 800 \borts (\S2)
    Gigabit Ethernet \borts (2)
    Rear View 2
    PCI Express
    expansion slots
    Mini DisplayPort \f2\y)
    Opti\bal digital
    audio out port
    Analog audio line-in port
    Analog audio line-out port
    Opti\bal digital audio in port
    DVI display port  
    						
    All Apple manuals Comments (0)

    Related Manuals for Apple mac pro server mid 2010 User Manual