Apple mac pro server mid 2010 User Manual
Have a look at the manual Apple mac pro server mid 2010 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Mac Pro (Mid 2010) Take Apart — Front-Panel-Board-to-Backplane-Board Cable 201 2010-12-06 Removal 1 Disconnect cable from front panel board and backplane board. 2 Remove cable from enclosure.
Mac Pro (Mid 2010) Take Apart — Backplane Board 202 2010-12-06 First Steps Open computer, lay it down with access side facing up, and remove: • All hard drives and drive carriers • Optical drive carrier and optical drives • PCIe fan • All PCI Express cards • Processor tray • Processor cage • Front-panel-board-to- backplane-board cable Disconnect power supply cable from backplane board. Refer to Power Supply in Take Apart. In addition, disconnect the antenna wires from the following: • AirPort Card • Bluetooth card Tools • ESD wrist strap • Phillips #2 screwdriver Backplane Board
Mac Pro (Mid 2010) Take Apart — Backplane Board 203 2010-12-06 Removal 1 Disconnect 4 cables. 2 Remove 10 screws. 3 Release AirPort antenna wires from 1 clip on backplane board. 4 Release Bluetooth antenna wire from 2 clips on backplane board.
Mac Pro (Mid 2010) Take Apart — Backplane Board 204 2010-12-06 5 Slide board down so that its power connector clears media shelf. 6 Slide board toward front of computer, so that its ports clear openings in back panel. 7 Lift board out of enclosure. Note: If you are replacing backplane board with a new board, transfer back ports EMI shield from original board to replacement board. Also transfer PCI cards and AirPort card (if installed). You do not need to transfer Bluetooth card to new board; it comes with Bluetooth card already installed.
Mac Pro (Mid 2010) Take Apart — Backplane Board 205 2010-12-06 Note: If you are replacing backplane board with a new board, remove protective film from top of battery. Reassembly Note: Connect optical drive cable A to connector A on backplane board; connect optical drive cable B to connector B on backplane board
Mac Pro (Mid 2010) Take Apart — Front Panel Board 206 2010-12-06 First Steps Open computer, lay it down with access side facing up, and remove: • Hard drive and drive carrier in drive bay 1 • Graphics card in slot 1 • PCIe fan • Processor tray • Processor cage • Front-panel-board-to- backplane-board cable Tools • ESD wrist strap • Phillips #2 screwdriver Front Panel Board
Mac Pro (Mid 2010) Take Apart — Front Panel Board 207 2010-12-06 Removal 1 Disconnect power button cable from front panel board. 2 Remove 5 screws. 3 Remove board from enclosure.
Mac Pro (Mid 2010) Take Apart — Power Button 208 2010-12-06 First Steps Open computer, lay it down with access side facing up, and remove: • Hard drive and drive carrier in drive bay 1 • Graphics card in slot 1 • PCIe fan • Processor tray • Processor cage • Front-panel-board-to- backplane-board cable Tools • ESD wrist strap • Jeweler’s flatblade screwdriver Power Button
Mac Pro (Mid 2010) Take Apart — Power Button 209 2010-12-06 Removal 1 Disconnect power button cable from front panel board. 2 Lay computer so that front panel is facing down. 3 Remove black cap. 4 Using jeweler’s flatblade screwdriver, pry up metal C-ring. 5 Remove power button board. 6 Remove metal activation ring. 7 Remove power button.
Mac Pro (Mid 2010) Take Apart — Optical Drive Cable Harness 210 2010-12-06 First Steps Open computer, lay it down with access side facing up, and remove: • All hard drives and drive carriers • Optical drive carrier and optical drives • PCIe fan • All PCI Express cards • Processor tray • Processor cage • Front-panel-board-to- backplane-board cable • Backplane board Tools • ESD wrist strap Optical Drive Cable Harness