Apple ibook g4 14 inch mid 2005 User Manual
Here you can view all the pages of manual Apple ibook g4 14 inch mid 2005 User Manual. The Apple manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 81
iBook G4 (14-inch Mid 2005) Take Apart - 80 AirPort Extreme/Bluetooth Card AirPort Extreme/Bluetooth Card Tools • Soft cloth • #0 Phillips screwdriver • Black stick (or other nonconductive nylon or plastic tool) Part Location Preliminary Steps Important: To avoid damaging the delicate connector on the AirPort Extreme/Bluetooth card, make sure you read and understand all of the instructions. Before you begin, remove the following: • Battery • Keyboard and RAM shield • Memory card • Bottom case •...
Page 82
81 - iBook G4 (14-inch Mid 2005) Take Apart AirPort Extreme/Bluetooth Card Procedure Important: Deviating from these steps could result in a damaged card. Make sure you read and understand all of the steps before removing or installing the card. 1. Remove the three identical 3-mm long screws from the Y-shaped bracket that fits over the AirPort Extreme/Bluetooth card. 2. Lift off the Y-shaped bracket.
Page 83
iBook G4 (14-inch Mid 2005) Take Apart - 82 AirPort Extreme/Bluetooth Card 3. Remove the two identical 3-mm long screws from the AirPort Extreme/Bluetooth card. 4. Caution: The connector that holds the card onto the logic board is delicate. Do not put pressure on the card, and do not deviate from these instructions. Important: To disconnect the card, press on the corner of the card—only where shown—as you use a black stick at the side of the card, near the card\ connector, to slowly pop up the...
Page 84
83 - iBook G4 (14-inch Mid 2005) Take Apart AirPort Extreme/Bluetooth Card 6. With the antenna cables still connected, turn over the card. 7. Note the location of the two cable connectors. Replacement Caution: Although the cable connectors are identical, do not swap the cables. Make sure that when the card is oriented as shown, the black\ cable is positioned between the corner hole and the gray cable.
Page 85
iBook G4 (14-inch Mid 2005) Take Apart - 84 AirPort Extreme/Bluetooth Card 8. Disconnect the cables by pulling the connectors straight off the card. Remove the card from the computer assembly.
Page 86
85 - iBook G4 (14-inch Mid 2005) Take Apart AirPort Extreme/Bluetooth Card 9. After connecting the antenna cables, install the replacement AirPort Extreme/ Bluetooth card by aligning the card directly over the connector and pressing down on the board over the connector area only. Important: A soft snap sound tells you that the card is connected to the logic board. Make sure the antenna cables are routed over the heatsink, as shown. The\ n install the two card screws followed by the Y-shaped...
Page 87
iBook G4 (14-inch Mid 2005) Take Apart - 86 Modem Modem Tools • Soft cloth • #0 Phillips screwdriver • Black stick (or other nonconductive nylon or plastic tool) Part Location Preliminary Steps Before you begin, remove the following: • Battery • Keyboard and RAM shield • Memory card • Bottom case • Bottom shield • DC-in board • Top case • Top shield
Page 88
87 - iBook G4 (14-inch Mid 2005) Take Apart Modem Procedure 1.Warning: When removing the modem, be careful not to strain the modem cable or shield. Read all of the procedure before removing and replacing the modem. 2. Peel up any strips of tape, if present, at the modem board. 3. Remove the two identical 3.5-mm long screws from the modem board.
Page 89
iBook G4 (14-inch Mid 2005) Take Apart - 88 Modem 4. Use a black stick to lift up one end of the modem board. Grasp the edges of the modem to disconnect it from the computer. Replacement Caution: Handle the modem by the edges only. When securing the modem to the logic board, press only on the area that is directly over t\ he modem connector.
Page 90
89 - iBook G4 (14-inch Mid 2005) Take Apart Modem 5. Disconnect the cable from the end of the modem board. 6. Remove the modem shield from the computer assembly. Replacement Note: Before installing the replacement modem, make sure to fit it into the metal shield.