Apple ibook g4 14 inch mid 2005 User Manual
Here you can view all the pages of manual Apple ibook g4 14 inch mid 2005 User Manual. The Apple manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 31
iBook G4 (14-inch Mid 2005) Take Apart - 30 Bottom Shield Bottom Shield Tools • Soft cloth • #0 Phillips screwdriver • Black stick (or other nonconductive nylon or plastic tool) Note: To organize the screws you remove from the computer, use a tray with divided compartments (such as a plastic ice cube tray). Part Location Preliminary Steps Before you begin, remove the following: • Battery • Bottom case
Page 32
![Page 32
31 - iBook G4 (14-inch Mid 2005) Take Apart
Bottom Shield
Procedure
1. With the computer on a soft cloth, remove the following screws from the bottom shield:
• Six identical 3.5-mm long Phillips screws
• Three identical 7.5-mm long Phillips screws
• One 14.5-mm long Phillips screw
Replacement Note: When reassembling the computer, install the replacement
bottom shield so that the corner of the shield closest to the ports is s\
ecured first.
(With the computer oriented as shown, this corner is the...](http://img.usermanuals.tech/thumb/462/38817/w300_ibook-g4-14-inch-mid-2005-31.png "Page 32
31 - iBook G4 (14-inch Mid 2005) Take Apart
Bottom Shield
Procedure
1. With the computer on a soft cloth, remove the following screws from the bottom shield:
• Six identical 3.5-mm long Phillips screws
• Three identical 7.5-mm long Phillips screws
• One 14.5-mm long Phillips screw
Replacement Note: When reassembling the computer, install the replacement
bottom shield so that the corner of the shield closest to the ports is s\
ecured first.
(With the computer oriented as shown, this corner is the...")
31 - iBook G4 (14-inch Mid 2005) Take Apart Bottom Shield Procedure 1. With the computer on a soft cloth, remove the following screws from the bottom shield: • Six identical 3.5-mm long Phillips screws • Three identical 7.5-mm long Phillips screws • One 14.5-mm long Phillips screw Replacement Note: When reassembling the computer, install the replacement bottom shield so that the corner of the shield closest to the ports is s\ ecured first. (With the computer oriented as shown, this corner is the...
Page 33
![Page 33
iBook G4 (14-inch Mid 2005) Take Apart - 32
Bottom Shield 3.
Warning: Do not bend the bottom shield.
Lift the bottom shield off the computer, being careful where it might ca\
tch on the tape.
4. Note: The two springs in the battery compartment can become loose. When
reassembling the computer, make sure that the two springs are in place before
installing the bottom case. Each spring has grease on the coils, and each has a plastic
cap on one end. Make sure the cap fits securely on the spring, and...](http://img.usermanuals.tech/thumb/462/38817/w300_ibook-g4-14-inch-mid-2005-32.png "Page 33
iBook G4 (14-inch Mid 2005) Take Apart - 32
Bottom Shield 3.
Warning: Do not bend the bottom shield.
Lift the bottom shield off the computer, being careful where it might ca\
tch on the tape.
4. Note: The two springs in the battery compartment can become loose. When
reassembling the computer, make sure that the two springs are in place before
installing the bottom case. Each spring has grease on the coils, and each has a plastic
cap on one end. Make sure the cap fits securely on the spring, and...")
iBook G4 (14-inch Mid 2005) Take Apart - 32 Bottom Shield 3. Warning: Do not bend the bottom shield. Lift the bottom shield off the computer, being careful where it might ca\ tch on the tape. 4. Note: The two springs in the battery compartment can become loose. When reassembling the computer, make sure that the two springs are in place before installing the bottom case. Each spring has grease on the coils, and each has a plastic cap on one end. Make sure the cap fits securely on the spring, and...
Page 34
33 - iBook G4 (14-inch Mid 2005) Take Apart Bottom Shield 5. Install the replacement bottom shield, and reassemble and test the computer. Replacement Note: Before installing the bottom shield, make sure cables are routed as shown.
Page 35
iBook G4 (14-inch Mid 2005) Take Apart - 34 DC-In Board DC-In Board Tools • Soft cloth • #0 Phillips screwdriver • Black stick (or other nonconductive nylon or plastic tool) Part Location Preliminary Steps Before you begin, remove the following: • Battery • Bottom case • Bottom shield
Page 36
35 - iBook G4 (14-inch Mid 2005) Take Apart DC-In Board Procedure 1. With the computer on a soft cloth, remove any tape that holds the cable to the frame or logic board. 2. Route the cable from the guides in the chassis.
Page 37
iBook G4 (14-inch Mid 2005) Take Apart - 36 DC-In Board 3. Remove the 3-mm long screw from the DC-in board. 4. Tilt up the DC-in board, and pivot it out of the frame.
Page 38
37 - iBook G4 (14-inch Mid 2005) Take Apart DC-In Board 5. Carefully peel up the DC-in cable from where it adheres to the bottom of the logic board. Caution: Do not forcefully pull or strain the cable.
Page 39
![Page 39
iBook G4 (14-inch Mid 2005) Take Apart - 38
DC-In Board 6. Disconnect the DC-in cable from the underside of the logic board.
7. Remove the DC-in board from the computer assembly.
8. Install the replacement DC-in board, and reassemble and test the computer.
Important: When routing the DC-in cable, make sure you route it to the left of the\
frame standoff, as shown.](http://img.usermanuals.tech/thumb/462/38817/w300_ibook-g4-14-inch-mid-2005-38.png "Page 39
iBook G4 (14-inch Mid 2005) Take Apart - 38
DC-In Board 6. Disconnect the DC-in cable from the underside of the logic board.
7. Remove the DC-in board from the computer assembly.
8. Install the replacement DC-in board, and reassemble and test the computer.
Important: When routing the DC-in cable, make sure you route it to the left of the\
frame standoff, as shown.")
iBook G4 (14-inch Mid 2005) Take Apart - 38 DC-In Board 6. Disconnect the DC-in cable from the underside of the logic board. 7. Remove the DC-in board from the computer assembly. 8. Install the replacement DC-in board, and reassemble and test the computer. Important: When routing the DC-in cable, make sure you route it to the left of the\ frame standoff, as shown.
Page 40
39 - iBook G4 (14-inch Mid 2005) Take Apart Battery Transfer Board Battery Transfer Board Tools • Soft cloth • #0 Phillips screwdriver • Black stick (or other nonconductive nylon or plastic tool) Part Location Preliminary Steps Before you begin, remove the following: • Battery • Bottom case • Bottom shield