Apple ibook g4 14 inch mid 2005 User Manual
Here you can view all the pages of manual Apple ibook g4 14 inch mid 2005 User Manual. The Apple manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 171
iBook G4 (14-inch Mid 2005) Take Apart - 170 Inverter Cable Inverter Cable Tools • Soft cloth • Black stick (or other nonconductive nylon or plastic tool) Note: To organize the screws you remove from the display assembly, use a tray with divided compartments (such as a plastic ice cube tray). Part Location Preliminary Steps Before you begin, remove the following: • Battery • Keyboard and RAM shield • Memory card • Bottom case • Bottom shield • DC-in board
Page 172
![Page 172
171 - iBook G4 (14-inch Mid 2005) Take Apart
Inverter Cable
• Top case
• Top shield
• Modem
• AirPort Extreme/Bluetooth card
• Display module
• Display rear housing
• Display clutch cover
• Display shield
• Display LCD panel
• LVDS cable (or just move it aside)
• AirPort Extreme/Bluetooth antenna cables (or just remove the tape that \
bundles the
antenna cables with the inverter cable)
Procedure
1. If tape covers the inverter cable where it exits the bezel, remove the tape.
2. Use a black stick or...](http://img.usermanuals.tech/thumb/462/38817/w300_ibook-g4-14-inch-mid-2005-171.png "Page 172
171 - iBook G4 (14-inch Mid 2005) Take Apart
Inverter Cable
• Top case
• Top shield
• Modem
• AirPort Extreme/Bluetooth card
• Display module
• Display rear housing
• Display clutch cover
• Display shield
• Display LCD panel
• LVDS cable (or just move it aside)
• AirPort Extreme/Bluetooth antenna cables (or just remove the tape that \
bundles the
antenna cables with the inverter cable)
Procedure
1. If tape covers the inverter cable where it exits the bezel, remove the tape.
2. Use a black stick or...")
171 - iBook G4 (14-inch Mid 2005) Take Apart Inverter Cable • Top case • Top shield • Modem • AirPort Extreme/Bluetooth card • Display module • Display rear housing • Display clutch cover • Display shield • Display LCD panel • LVDS cable (or just move it aside) • AirPort Extreme/Bluetooth antenna cables (or just remove the tape that \ bundles the antenna cables with the inverter cable) Procedure 1. If tape covers the inverter cable where it exits the bezel, remove the tape. 2. Use a black stick or...
Page 173
iBook G4 (14-inch Mid 2005) Take Apart - 172 Inverter Board Inverter Board Tools • Soft cloth • Black stick (or other nonconductive nylon or plastic tool) Note: To organize the screws you remove from the display assembly, use a tray with divided compartments (such as a plastic ice cube tray). Part Location Preliminary Steps Before you begin, remove the following: • Battery • Keyboard and RAM shield • Memory card • Bottom case • Bottom shield • DC-in board • Top case • Top shield • Modem • AirPort...
Page 174
173 - iBook G4 (14-inch Mid 2005) Take Apart Inverter Board • Display rear housing • Display clutch cover • Display shield • Display LCD panel • Microphone cable • LVDS cable • AirPort Extreme/Bluetooth antenna cable • Inverter cable Procedure 1. Remove the strip of tape from the inverter board, and note that the ends of the board stick to the bezel with adhesive.
Page 175
![Page 175
iBook G4 (14-inch Mid 2005) Take Apart - 174
Inverter Board 2. Starting at one end of the inverter board, use a black stick to remove the inverter
board from its place in the bezel.
3. Install the replacement inverter board and cable, and reassemble and test the computer.
Important: The inverter board is wrapped, as shown, with mylar and/or tape. Do not\
unwrap the board.
Replacement Note: Make sure the underside of the board has sufficient adhesive on
both ends.](http://img.usermanuals.tech/thumb/462/38817/w300_ibook-g4-14-inch-mid-2005-174.png "Page 175
iBook G4 (14-inch Mid 2005) Take Apart - 174
Inverter Board 2. Starting at one end of the inverter board, use a black stick to remove the inverter
board from its place in the bezel.
3. Install the replacement inverter board and cable, and reassemble and test the computer.
Important: The inverter board is wrapped, as shown, with mylar and/or tape. Do not\
unwrap the board.
Replacement Note: Make sure the underside of the board has sufficient adhesive on
both ends.")
iBook G4 (14-inch Mid 2005) Take Apart - 174 Inverter Board 2. Starting at one end of the inverter board, use a black stick to remove the inverter board from its place in the bezel. 3. Install the replacement inverter board and cable, and reassemble and test the computer. Important: The inverter board is wrapped, as shown, with mylar and/or tape. Do not\ unwrap the board. Replacement Note: Make sure the underside of the board has sufficient adhesive on both ends.
Page 176
![Page 176
175 - iBook G4 (14-inch Mid 2005) Take Apart
Inverter Board
Important:
On the inner side of the bezel, near the lower left corner, notice the \
inverted L that is molded into the bezel. When installing the replacem\
ent inverter
board, make sure you align the upper left corner of the board with the m\
olded
marking.](http://img.usermanuals.tech/thumb/462/38817/w300_ibook-g4-14-inch-mid-2005-175.png "Page 176
175 - iBook G4 (14-inch Mid 2005) Take Apart
Inverter Board
Important:
On the inner side of the bezel, near the lower left corner, notice the \
inverted L that is molded into the bezel. When installing the replacem\
ent inverter
board, make sure you align the upper left corner of the board with the m\
olded
marking.")
175 - iBook G4 (14-inch Mid 2005) Take Apart Inverter Board Important: On the inner side of the bezel, near the lower left corner, notice the \ inverted L that is molded into the bezel. When installing the replacem\ ent inverter board, make sure you align the upper left corner of the board with the m\ olded marking.
Page 177
iBook G4 (14-inch Mid 2005) Take Apart - 176 Bezel Brace with Clutch Assembly Bezel Brace with Clutch Assembly Tools • Soft cloth • #0 Phillips screwdriver Replacement Note: If the tape you remove from this assembly is worn and cannot be reused, use new Kapton tape (Apple part number 922-5025). Part Location Preliminary Steps Before you begin, remove the following: • Battery • Keyboard and RAM shield • Memory card • Bottom case
Page 178
177 - iBook G4 (14-inch Mid 2005) Take Apart Bezel Brace with Clutch Assembly • Bottom shield • DC-in board • Top case • Top shield • Modem • AirPort Extreme/Bluetooth card • Display module • Display rear housing • Display clutch cover • Display shield • Display LCD panel • Microphone cable • LVDS cable • AirPort Extreme/Bluetooth antenna cables • Inverter cable • Inverter board
Page 179
iBook G4 (14-inch Mid 2005) Take Apart - 178 Bezel Brace with Clutch Assembly Procedure Note: Although your bezel assembly might appear somewhat different than shown, the steps to follow are the same. 1. With the bezel assembly lying on a soft cloth, remove any pieces of tape. 2. From the bezel brace, remove the following Phillips screws as shown in the images that follow: • 6-mm long black screw at the corner of the brace (1 and 2) • 5-mm long screw at the upper right side of the brace and two at...
Page 180
179 - iBook G4 (14-inch Mid 2005) Take Apart Bezel Brace with Clutch Assembly Replacement Note: Install screws in the order shown: