Home > Apple > Notebook > Apple ibook g4 14 inch mid 2005 User Manual

Apple ibook g4 14 inch mid 2005 User Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Apple ibook g4 14 inch mid 2005 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 206
    Add page 171 to Favourites
    image text
    Enable zoom 
    							
iBook G4 (14-inch Mid 2005) Take Apart - 170
 Inverter Cable
Inverter Cable
Tools
• Soft cloth
• Black stick (or other nonconductive nylon or plastic tool)
Note:  To organize the screws you remove from the display assembly, use a tray with 
divided compartments (such as a plastic ice cube tray).
Part Location
Preliminary Steps
Before you begin, remove the following:
• Battery 
• Keyboard and RAM shield
• Memory card
• Bottom case
• Bottom shield
• DC-in board
    Add page 172 to Favourites
    image text
    Enable zoom 
    							
171 - iBook G4 (14-inch Mid 2005) Take Apart
 Inverter Cable
• Top case
• Top shield
• Modem
• AirPort Extreme/Bluetooth card
• Display module
• Display rear housing
• Display clutch cover
• Display shield
• Display LCD panel 
• LVDS cable (or just move it aside)
• AirPort Extreme/Bluetooth antenna cables (or just remove the tape that \
bundles the 
antenna cables with the inverter cable)
Procedure
1. If tape covers the inverter cable where it exits the bezel, remove the tape.
2. Use a black stick or  flat-blade jeweler’s screwdriver to disconnect the inverter cable 
from the inverter board.
3. Install the replacement inverter cable and tape, and reassemble and test the  computer.
    Add page 173 to Favourites
    image text
    Enable zoom 
    							
iBook G4 (14-inch Mid 2005) Take Apart - 172
 Inverter Board
Inverter Board
Tools
• Soft cloth
• Black stick (or other nonconductive nylon or plastic tool)
Note:  To organize the screws you remove from the display assembly, use a tray with 
divided compartments (such as a plastic ice cube tray).
Part Location
Preliminary Steps
Before you begin, remove the following:
• Battery 
• Keyboard and RAM shield
• Memory card
• Bottom case
• Bottom shield
• DC-in board
• Top case
• Top shield
• Modem
• AirPort Extreme/Bluetooth card
• Display module
    Add page 174 to Favourites
    image text
    Enable zoom 
    							
173 - iBook G4 (14-inch Mid 2005) Take Apart
 Inverter Board
• Display rear housing
• Display clutch cover
• Display shield
• Display LCD panel 
• Microphone cable
• LVDS cable
• AirPort Extreme/Bluetooth antenna cable
• Inverter cable
Procedure
1. Remove the strip of tape from the inverter board, and note that the ends of the board 
stick to the bezel with adhesive.
    Add page 175 to Favourites
    image text
    Enable zoom 
    							
iBook G4 (14-inch Mid 2005) Take Apart - 174
 Inverter Board 2. Starting at one end of the inverter board, use a black stick to remove the inverter 
board from its place in the bezel.
3. Install the replacement inverter board and cable, and reassemble and test the  computer.
Important:  The inverter board is wrapped, as shown, with mylar and/or tape. Do not\
 
unwrap the board.
Replacement Note:  Make sure the underside of the board has sufficient adhesive on 
both ends.
    Add page 176 to Favourites
    image text
    Enable zoom 
    							
175 - iBook G4 (14-inch Mid 2005) Take Apart
 Inverter Board
Important:
 On the inner side of the bezel, near the lower left corner, notice the \
inverted L that is molded into the bezel. When installing the replacem\
ent inverter 
board, make sure you align the upper left corner of the board with the m\
olded 
marking.
    Add page 177 to Favourites
    image text
    Enable zoom 
    							
iBook G4 (14-inch Mid 2005) Take Apart - 176
 Bezel Brace with Clutch Assembly
Bezel Brace with Clutch 
Assembly
Tools
• Soft cloth
• #0 Phillips screwdriver
Replacement Note:  If the tape you remove from this assembly is worn and cannot be 
reused, use new Kapton tape (Apple part number 922-5025).
Part Location
Preliminary Steps
Before you begin, remove the following:
• Battery 
• Keyboard and RAM shield
• Memory card
• Bottom case
    Add page 178 to Favourites
    image text
    Enable zoom 
    							
177 - iBook G4 (14-inch Mid 2005) Take Apart
 Bezel Brace with Clutch Assembly
• Bottom shield
• DC-in board
• Top case
• Top shield
• Modem
• AirPort Extreme/Bluetooth card
• Display module
• Display rear housing
• Display clutch cover
• Display shield
• Display LCD panel 
• Microphone cable 
• LVDS cable
• AirPort Extreme/Bluetooth antenna cables
• Inverter cable
• Inverter board
    Add page 179 to Favourites
    image text
    Enable zoom 
    							
iBook G4 (14-inch Mid 2005) Take Apart - 178
 Bezel Brace with Clutch Assembly
Procedure
Note:  Although your bezel assembly might appear somewhat different than shown, the 
steps to follow are the same. 
1. With the bezel assembly lying on a soft cloth, remove any pieces of tape. 
2. From the bezel brace, remove the following Phillips screws as shown in the images  that follow:
• 6-mm long black screw at the corner of the brace (1 and 2)
• 5-mm long screw at the upper right side of the brace and two at the left\
 side of the brace (3, 4, and 5) 
• 3-mm long screw at the right side of the brace (6)
    Add page 180 to Favourites
    image text
    Enable zoom 
    							
179 - iBook G4 (14-inch Mid 2005) Take Apart
 Bezel Brace with Clutch Assembly
Replacement Note:
 Install screws in the order shown:
    All Apple manuals Comments (0)

    Related Manuals for Apple ibook g4 14 inch mid 2005 User Manual