Apple ibook g4 14 inch mid 2005 User Manual
Have a look at the manual Apple ibook g4 14 inch mid 2005 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
iBook G4 (14-inch Mid 2005) Take Apart - 90 Modem 7. Install the replacement modem, and reassemble and test the computer. Replacement Note: Before installing the replacement modem, make sure no cables are blocking the modem connector on the logic board. Replacement Caution: With the modem connector centered over the connector on the logic board, press the modem onto the connector. Press only over the\ connector; do not press elsewhere on the modem.
91 - iBook G4 (14-inch Mid 2005) Take Apart Reed Switch Board Reed Switch Board Tools • Soft cloth • Black stick (or other nonconductive nylon or plastic tool) Replacement Note: If the tape you remove from this assembly is worn and cannot be reused, use new Kapton tape (Apple part number 922-5025). Part Location Preliminary Steps Before you begin, remove the following: • Battery • Keyboard and RAM shield • Memory card • Bottom case • Bottom shield • DC-in board • Top case • Top shield
iBook G4 (14-inch Mid 2005) Take Apart - 92 Reed Switch Board Procedure 1. Note how the reed switch cable is routed along the lower corner of the optical drive and connected to the logic board. 2. Disconnect the connector from the logic board. 3. Peel up or loosen the tape from the optical drive and frame.
93 - iBook G4 (14-inch Mid 2005) Take Apart Reed Switch Board 4. Caution: To avoid damaging the reed switch cable, slowly pull it up from the groove between the frame rib and the optical drive. Hold the tape aside as you guide the cable out of the groove. 5. Use a black stick to pry up the reed switch board from the adhesive on the optical drive bezel.
iBook G4 (14-inch Mid 2005) Take Apart - 94 Reed Switch Board 6. Replacement Note: When replacing the reed switch board, align the upper right corner with the raised L-shaped guide on the optical drive bezel.
95 - iBook G4 (14-inch Mid 2005) Take Apart Reed Switch Board 7. Remove the reed switch cable assembly. 8. Install the replacement reed switch board and cable assembly, and reassemble and test the computer. Be sure to tuck the cables into the groove at the lower edge of the opti\ cal drive. Secure the cables with the tape provided.
iBook G4 (14-inch Mid 2005) Take Apart - 96 Optical Drive Optical Drive Tools • Soft cloth • #0 Phillips screwdriver • Black stick (or other nonconductive nylon or plastic tool) Note: To organize the screws you remove from the computer, use a tray with divided compartments (such as a plastic ice cube tray). Part Location Preliminary Steps Before you begin, remove the following: • Battery • Keyboard and RAM shield • Memory
97 - iBook G4 (14-inch Mid 2005) Take Apart Optical Drive • Bottom case • Bottom shield • DC-in board • Top case • Top shield
iBook G4 (14-inch Mid 2005) Take Apart - 98 Optical Drive Procedure 1. With the computer on a soft cloth, peel up any tape on top of the optical drive. 2. Remove the following from the optical drive: • 6-mm long screw at upper right corner of drive • 6-mm long screw at lower left corner of drive (this screw has an identi\ fiable collar under the screw head) • 3-mm long screw at upper left corner of drive Replacement Note: When replacing the optical drive, install the screws in the following sequence: lower left (1), upper right (2), upper left (3)\ .
99 - iBook G4 (14-inch Mid 2005) Take Apart Optical Drive 3. Move the reed switch cable aside. Note: You do not need to completely remove the reed switch board and cable. 4. Disconnect the optical drive ribbon cable from the logic board.