Aleratec 111 HDD Copy Cruiser HighSpeed WL User Guide
Have a look at the manual Aleratec 111 HDD Copy Cruiser HighSpeed WL User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Aleratec manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
www.aleratec.com25 Using the HDD Copy Cruiser High-Speed WL Main Menu Utility - Update System B. Create Update HDD For technical support use only. B1. To create an Update HDD, select “Create Update HDD” and press OK. B2. The following information will be displayed. Press OK to confirm. B3. The following information will be displayed. B4. The formatting is now complete. ESC OK[ Update System ] 2. Create Update HDD ESC OKDo FORMAT HDD#1 Confirm? ESC OKFormat HDD ESC OKFORMAT Complete!
www.aleratec.com26 Using the HDD Copy Cruiser High-Speed WL Main Menu Utility - System Info This function will help you give more technical information sometimes required by technical support. 1. Use the arrow buttons (or) to select “Utility”. The following screen will be displayed. 2. Press OK to select. The following information will be displayed. 3. Use the arrow buttons (or) to select “System Info” and press OK. 4. The following information will be displayed. ESC OK2014/10/07 09:50 5. Utility ESC OK[ 5. Utility ] 5.1 Show HDD Info ESC OK[ 5. Utility ] 3. System Info ESC OKAleratec 1-11 Ver: 2.33.4
www.aleratec.com27 Using the HDD Copy Cruiser High-Speed WL Main Menu Setup The “Setup” menu contains configuration options for the HDD Copy Cruiser High- Speed WL. It is suggested to use the factory defaults for optimum performance. 1. Use the arrow buttons (or) to select “Setup”. Press OK to select. The following screen will be displayed. 2. Use the arrow buttons to scroll between the types of Setup functions: Copy Area, Skip Error, Erase Master, Unknown Format, Transfer Rate, Buzzer, Language, Stop Motor Time, Advanced Setup, and Restore Default. ESC OK2014/10/07 09:50 6. Setup
www.aleratec.com28 Using the HDD Copy Cruiser High-Speed WL Main Menu Setup - Copy Area This function specifies which data is to be copied from the Source hard drive. 1. In the Setup menu, use the arrow buttons (or) to select “Copy Area”. The following screen will be displayed. 2. Press OK to select. Use the arrow buttons to scroll between the types of functions within the Copy Area menu: System and Files, ALL Partitions, Whole HDD, and Percentage. 3. System and Files: This function will copy only System and Data files located on the first partition of the source HDD. 4. ALL Partitions: This function will copy only System and Data files located on any partition of source HDD. 5. Whole HDD: This function will copy the complete HDD including free space. If you need to also copy HPA, please refer to Advanced Setup on page 38. ESC OK[ 6. Setup ] 1. Copy Area ESC OK[ Copy Area ] System and Files ESC OK[ Copy Area ] ALL Partitions ESC OK[ Copy Area ] Whole HDD
www.aleratec.com29 Using the HDD Copy Cruiser High-Speed WL Main Menu Setup - Copy Area - Continued 6. The following information will be displayed. Setup - Skip Error This function will set the duplicator to be able to overwrite the source drive when preforming any overwrite function. 1. In the Setup menu, use the arrow buttons (or) to select “Skip Error”. The following screen will be displayed. Press OK to select. 2. The following information will be displayed. ESC OK[ 6. Setup ] 2. Skip Error ESC OK[ Copy Area ] Percentage (%) ESC OK[ Skip Error ] 0
www.aleratec.com30 Using the HDD Copy Cruiser High-Speed WL Main Menu Setup - Erase Master This function controls whether the hard disk drive inserted into the Source bay may be altered by an overwrite or Secure Erase. 1. In the Setup menu, use the arrow buttons (or) to select “Erase Master”. The following screen will be displayed. 2. Press OK to select. Use the arrow buttons to scroll between Enable or Disable options. 3. Press OK to Enable or Disable the erasing of the master disc. ESC OK[ 6. Setup ] 3. Erase Master ESC OK6.3 Erase Master Enable ESC OK6.3 Erase Master Disable
www.aleratec.com31 Using the HDD Copy Cruiser High-Speed WL Main Menu Setup - Unknown Format This function will allow you to copy non standard formatted HDD. 1. In the Setup menu, use the arrow buttons (or) to select “Unknown Format”. The following screen will be displayed. 2. Press OK to select. Use the arrow buttons to scroll between the Copy Unknown or Skip Unknown options. 3. Press OK to Copy Unknown or Skip Unknown when formatting hard drives. ESC OK[ 6. Setup ] 4. Unknown Format ESC OK[ Unknown Format ] Copy Unknown ESC OK[ Unknown Format ] Skip Unknown
www.aleratec.com32 Using the HDD Copy Cruiser High-Speed WL Main Menu Setup - Transfer Rate This function will allow you to view and set the trasnfer rate of your drives. 1. In the Setup menu, use the arrow buttons (or) to select “Transfer Rate”. The following screen will be displayed. 2. Press OK to select. The following information will be displayed. 3. Use the arrow buttons () to toggle through the available options. Once you change a configuration option, remember to press OK to save it. ESC OK[ 6. Setup ] 5. Transfer Rate ESC OK[ Transfer Rate ] UDMA 5
www.aleratec.com33 Using the HDD Copy Cruiser High-Speed WL Main Menu Setup - Buzzer This function controls whether the systems built-in buzzer enabled (turned on) or disabled (muted). 1. In the Setup menu, use the arrow buttons (or) to select “Buzzer”. The following screen will be displayed. 2. Press OK to select. Use the arrow buttons to scroll between the Turn On and Mute options. 3. Press OK to turn on or mute the buzzer sound. ESC OK[ 6. Setup ] 6. Buzzer ESC OK[ Buzzer ] Turn On ESC OK[ Buzzer ] Mute
www.aleratec.com34 Using the HDD Copy Cruiser High-Speed WL Main Menu Setup - Language This option allows you to select the language that is used for the display. 1. Use the arrow buttons (or) select “Language”. The following screen will be displayed. 2. Press OK to display the current language selection (the default language is English). 3. Use the arrow buttons () to toggle through the available options. Once you change a configuration option, remember to press OK to save it. ESC OK[ 6. Setup ] 7. Language ESC OK[ Language ] English