Aleratec 11 DVDCD Copy Cruiser Pro HS Stand Alone DVD CD Duplicator User Guide

www.aleratec.com25
Using the DVD/CD Duplicator
Main Menu
Edit Track - continued 
Repeat for all tracks you want to copy. Then use the arrow keys to move to 
5. 
“End”, then press the  ENT button to finish disc editing. Use the arrow keys 
to make “Yes” or “No” selection. Select “Yes” by pressing the  ENT button.
The LCD will display the status of the copying process. At the completion 
6. 
of the copying process, the LCD will display the “Burn Complete!” \
message. Press the ENT button to continue to...

www.aleratec.com
26
Using the DVD/CD Duplicator
Main Menu
Edit Track - continued 
When you have finished and the display shows: “Continue Edit”, Next 
8. 
Disc? Yes”, use the arrow keys to make “Yes” or “No” selection. Select 
“No”.
The system will ask to close the disc session. “Close all disc’s session? 
9. 
Yes”. Use the arrow keys to make “Yes” or ‘No” selection. Select “Yes”.
LCD display will show the process of closing the session: “Closing Se\
ssion 
10. 
Please Wait —”. 
Note: You will NOT be...

www.aleratec.com27
Using the DVD/CD Duplicator
Main Menu
Edit Track - continued 
10.2 (Not supported)
10.3 Play Audio Track
By selecting “Play Audio” you can play music with your DVD/CD Duplicator. 
You can connect headphones or speakers to the headphone jack on the DVD/
CD-ROM or the speaker jacks on the back of the unit.
Load the CD you want to play in that drive and press the 
1.  ENT button to 
play music. Press ESC to index to the next setting.
10-03 Edit Track
Play Audio Track

ESCENT
Select...

www.aleratec.com
28
Using the DVD/CD Duplicator
Main Menu
Edit Track - continued 
10.4 Close Session
Selecting “Close Session” will finalize the disc; no further data can be added. 
This function will make the disc readable on a normal CD player.
Press the 
1.  ENT button to enter the setting, or press  ESC to index to the next 
setting.
The system will ask to close the disc session. “Close all disc’s session? 
2. 
Yes”. Use the arrow keys to make “Yes” or ‘No” selection. Select “Yes”.
LCD display will...

www.aleratec.com29
Using the DVD/CD Duplicator
Main Menu
Setup
You can change the original default settings using this setup menu. There are 
different settings to control the duplicator’s operation. In general, using the 
original default settings for optimal performance is suggested.
This function includes 18 subfunctions. These are:
11.01 Language (LCD Type 1: English)
• 
11.02 CD Burn Speed
• 
11.03 DVD Burn Speed
• 
11.04 Read Speed (Maximum)
• 
11.05 Auto Drive Start
• 
11.06 Startup Menu
• 
11.07...

www.aleratec.com
30
Using the DVD/CD Duplicator
Main Menu
Setup
11.01 Language (Optional)
This function selects the language shown on the display (English, Traditional 
Chinese, Simplified Chinese, and Japanese). 
To select, press the 
1.  ENT button, or ESC to exit.
11.02 CD Burn Speed
This setting controls the maximum CD writing speed of the DVD/CD-
Recorders. The default setting is “Auto”, which will use the highest writing \
speed of the recorders. Sometimes maximum writing speed causes a high fa\...

www.aleratec.com31
Using the DVD/CD Duplicator
Main Menu
Setup - continued 
11.03 DVD Burn Speed
This setting controls the maximum DVD writing speed of the DVD/CD 
Recorders. The default setting is “Auto”, which will use the highest writing \
speed of the recorders. Sometimes maximum writing speed causes a high fa\
ilure 
rate due to poor CD quality or unstable CD writing due to high speed. Lo\
wering 
the writing speed will increase the probability of making successful cop\
ies.
Press the 
1.  ENT...

www.aleratec.com
32
Using the DVD/CD Duplicator
Main Menu
Setup - continued 
11.05 Auto Start Drive
The function of the Auto Start Drive is to copy or test automatically once blank 
discs are loaded into recorders. 
Default setting is “Off”. Press 
1.  ENT button to change, or ESC to exit. 
11.06 Startup Menu
This function selects the menu item that will be the first item shown on the 
display when you turn on the duplicator. The default setting is Copy. Use the arrow buttons to select the desired item...

www.aleratec.com33
Using the DVD/CD Duplicator
Main Menu
Setup - continued 
11.07 Auto Verify
This setting controls auto verify on the target discs.
Default setting is “Off”; press the 
1.  ENT button to change, or ESC to exit.
11.08 Auto Compare
This setting controls auto compare of data between source and target discs after 
copying. Default setting is “Off”; press the 
1.  ENT button to change, or ESC to exit.
11-07. Setup
Auto Verify

ESCENT
Auto Verify
Off

ESCENT
11-08. Setup
Auto Compare
...

www.aleratec.com
34
Using the DVD/CD Duplicator
Main Menu
Setup - continued 
11.09 Auto Prescan
This setting controls auto prescan of the master to verify that it can b\
e read 
properly, and also tests the reading speed.
Default setting is “Off”; press the 
1.  ENT button to change, or ESC to exit.
11-09. Setup
Auto Prescan

ESCENT
Auto Prescan
Off

ESCENT
11-09. Setup
Auto Prescan

ESCENT