Aleratec 11 DVDCD Copy Cruiser Pro HS Stand Alone DVD CD Duplicator User Guide

www.aleratec.com45
Using the DVD/CD Duplicator
Main Menu
Advanced Setup - continued 
12.07 Update Firmware
This function is to update your firmware. 
Make sure there are no discs in the system. Place the disc that contains\
 the 
1. 
latest firmware data into the DVD/CD-ROM. During updating, do not turn 
off the power to the machine, since the updating will not be finished until 
the machine resets itself.
Press 
2.  ENT to update. Display will ask if you want to update. Select YES, 
then press the  ENT...

www.aleratec.com
46
Using the DVD/CD Duplicator
Main Menu
Advanced Setup - continued 
12.08 Compare Firmware
This function compares the current version firmware with the latest version 
when the firmware disc is placed into the DVD/CD-ROM.
Place the disc that contains the latest firmware data into the DVD/CD-
1. 
ROM.
12.09 Hardware Diagnostic
This function will detect the devices connected to the duplicator’s controller and 
display information on the hardware.  Move to Hardware Diagnostic with the...

www.aleratec.com47
Using the DVD/CD Duplicator
Main Menu
Advanced Setup - continued 
12.10 Load Default
This function resets the Duplicator’s settings back to their factory default values.
By pressing the 
1.  ENT button, the duplicator will be reset to it’s factory 
default settings.
12.11 CD+G (Not supported)
12.12 ISRC & MCN
ISRC & MCN mean the information of international standard recording code\
 
such as writer, country, year of publication, etc., can be written into each track. Default setting is...

www.aleratec.com
48
Using the DVD/CD Duplicator
Main Menu
Advanced Setup - continued 
12.14 USB Option
This function  lets you connect the Duplicator to a computer. Be sure that your 
computer supports USB 2.0.
Note: When the USB option is off, “14. USB Mode” will be hidden; that is, it won’t 
appear in the first layer of the function menu. Only “12. Adv Setup” will appear. 
When the USB option is on, the original “12. Adv Setup” will change to “12.14 
Adv Setup”.
There are two ways to enter USB Mode:...

www.aleratec.com49
Using the DVD/CD Duplicator
Main Menu
Advanced Setup - continued 
12.14 USB Option
Manual:
2.   Press the Down Arrow to see the following display. Here you can 
switch back to standalone mode (copy mode).
Press 
3.  ENT and the display will change to the following display. Press the 
Down Arrow to switch to Yes. Press ENT and the Duplicator will switch 
back to the standalone duplicator mode (copy mode).
To go back to USB Mode, go to menu item “12.14 USB Mode” and press \
4. 
ENT....

www.aleratec.com
50
Using the DVD/CD Duplicator
Main Menu
Advanced Setup - continued 
12.15 USB Auto-Link Option
Press 
1.  ENT and use the up and down arrows to toggle between ON and 
OFF. With USB Auto-Link ON, the controller will enter “USB L. H Mode” 
simply by connecting the USB cable to the USB port of the Duplicator and\
 
the USB port of your computer. 
When you are finished with USB Mode, simply disconnect the USB cable 
2. 
from the computer, and the Duplicator will switch to Stand Alone.
12.16...

www.aleratec.com51
Using the DVD/CD Duplicator
Using the Duplicator as a DVD/CD-Recorder
The DVD/CD Duplicator can be used as a DVD/VD-Recorder. Installation 
consists of connecting the Duplicator to your computer, and installing the 
software on your computer.
Connect the Duplicator to your computer.
1. 
Connect the USB 2.0 Data Cable to the Duplicator.
 
▪
Align and gently attach the USB 2.0 Data Cable.
Power Connector
USB 2.0 Connector 

www.aleratec.com
52
Using the DVD/CD Duplicator
Using the Duplicator as a DVD/CD-Recorder - continued
Connect the USB 2.0 Data Cable to the Duplicator.
 
▪
Align and gently insert the USB 2.0 Data Cable into an available USB 
2.0 port on your computer, making sure you do not bend the connector.
For P/N 260147 and 260148 and systems running Windows 98SE only: 
 
▪
Install the USB 2.0 Drivers.
If you are running Windows 98SE: After your computer starts up, insert 
the USB 2.0 Driver Software in your...

www.aleratec.com53
Specifications
Loading MechanismsTray
• 
Supported Media Types DVD-R/RW
• 
DVD+R/RW
• 
CD-R
• 
CD-RW
• 
120mm, mini CD (8cm/3”)
• 
Business Card CD
• 
Supported Formats Most Industry Standard DVD and CD Formats
• 
Recording Modes Disk-at-Once
• 
Track-at-Once
• 
Session-at-Once
• 
Copy Speed Selectable
• 
Power Requirements 115-230 VAC Auto Switching
• 
Dimensions
(height x width x depth) 17cm x 17.8cm x 28.9cm
• 
(6 5/8” x 7”x 11 3/8”)
• 
Weight 4.6 kg (10.1 lbs)
• 
Warranty Limited 1...

www.aleratec.com
54
Troubleshooting
If your DVD/CD Duplicator is not performing as expected, refer to the 
symptoms in the following table, and follow the suggested corrective act\
ion.
Symptoms Corrective Action
No message on display or 
the unit does not operate 
when power on. Check the power cord and the power outlet. 
• 
Reset power-on (turn power off, wait 10 
seconds, turn power back on).
Display shows an error 
message. During an operation like “Copy”, “Test”, or 
• 
“Compare and Verify”, if you...