Aleratec 11 DVDCD Copy Cruiser Pro HS Stand Alone DVD CD Duplicator User Guide

www.aleratec.com5
Precautions
Before installing your DVD/CD Duplicator, please read the following.
Installation
Avoid placing the DVD/CD Duplicator in a location subject to:
High humidity
• 
High temperature
• 
Excessive dust
• 
Mechanical vibration
• 
Direct sunlight
• 
Electromagnetic radiation
• 
Operation
Do not move the DVD/CD Duplicator during operation. This may cause it to 
malfunction during operations.
Avoid exposing the duplicator to sudden changes in temperature as condens\
ation 
may form on...

www.aleratec.com
6
Overview
Main Menu
This section provides a listing of the functions on the DVD/CD Duplicato\
r. 
Detailed descriptions of each function are given in the next section. The 
functions are numbered for easy reference; these numbers are also used i\
n the 
next section.
There are 12 main menu items that will display in the DVD/CD Duplicator \
Display Panel. These are:
Note: Main Menu items “Select Source” (number 8) and “Image” (n\
umber 9) are 
not supported.
Note: Main Menu items “Edit...

www.aleratec.com7
Overview
Subfunctions
The main menu “Edit Track” (for Audio disc only) function has 4 subfunctions. 
These are:
10.1 CD to CD Edit
10.2 (Not supported)
10.3 Play Audio Track
10.4 Close Session
10. Edit TrackENT

ESC 

www.aleratec.com
8
Overview
Subfunctions - continued 
The main menu “Setup” function has 18 subfunctions. These are:
Note: For functions with options, the default setting (where applicable) is \
indicated with an asterisk (*).
11.01 Language
11.02 CD Burn Speed
11.03 DVD Burn Speed
11.04 Read Speed (max.)
11.05 Auto Drive Start
11.06 Startup Menu
11.07 Auto Verify*
11.08 Auto Compare*
11.09 Auto Prescan*
11.10 Eject Disc*
11.11 Burn On The Fly*
11.12 Burn Mode*
11.13 Display Time
11.14 Button Sound*...

www.aleratec.com9
Overview
Subfunctions - continued 
The main menu “Adv Setup” (Advanced Setup) function has 16 subfu\
nctions. 
These are:
Note: For functions with options, the default setting (where applicable) is \
indicated with an asterisk (*).
12.01 UnderRun Protect*
12.02 Overburn*
12.03 Read Error Skip*
12.04 (not supported)
12.05 (not supported)
12.06 Burn-in
12.07 Update Firmware
12.08 Compare Firmware
12.09 Hardware Diagnostic
12.10 Load Default
12.11 CD&G Format (Not supported)
12.12 ISRC...

www.aleratec.com
10
Using the DVD/CD Duplicator
Inserting Discs
Press the Eject button on the DVD/CD Recorder.
1. 
Place the disc in the tray. The printed (non-shiny) surface of the disc should 
2. 
be up.
To close the tray, press the Eject button or lightly push the front center of 
3. 
the tray.
Note: 
Never place two discs in the tray at the same time.
•	
Do not touch the surface of the disc where it has been recorded.
•	
When using a 120 mm disc, please place it in the center of the tray wher\
e you...

www.aleratec.com11
Using the DVD/CD Duplicator
Power Up Sequence
During the normal powering up sequence the DVD/CD Duplicator will prefor\
m 
a self-test sequence. 
Quick Operating Sequence Overview
Select Copy function by pressing arrow button. Place the source DVD or 
• 
CD in the top drive. Place blank DVD-R/RW, DVD+R/RW, CD-R/RW, or 
CD-RW media in the DVD/CD-Recorder. After the recorder detects the blank 
DVD/CD disc, press the ENT button to start copying.
When Copy is completed, a good disc copy...

www.aleratec.com
12
Using the DVD/CD Duplicator
Main Menu
Functions are selected with the arrow keys. The numbers correspond to the 
Function listing in the previous section.
Copy 
During the duplication process, data will be written to a blank DVD-R/RW, 
DVD+R/RW, or CD-R/RW disc loaded in the Duplicator. Before starting the 
duplication process, please make sure the source DVD/CD is placed in the\
 
DVD/CD-ROM drive.
Place a blank DVD-R/RW, DVD+R/RW, or CD-R/RW disc into the DVD/
1. 
CD-Recorder; when...

www.aleratec.com13
Using the DVD/CD Duplicator
Copy - continued 
When copying audio CDs, it is highly recommended to copy at a speed of 1\
6x or 
lower to ensure the best possible quality audio reproduction. Go to “\
Setup” and 
then “Burning Speed” to change copy speed before selecting tracks.\
 

www.aleratec.com
14
Using the DVD/CD Duplicator
Main Menu
Test 
This function is a test process that simulates data being written to the\
 DVD/
CD-R/RW disc, without actually burning a disc. When the test process is 
complete, the DVD-R/RW or CD-R/RW discs will remain blank. For DVD-RW 
or CD-RW discs that contain data, “Test” will quick erase all old data before 
simulation. Therefore, never perform “Test” on DVD/CD-RW discs that contain 
important data. 
Note: Test is not supported by DVD+R/RW discs....