Aleratec 11 DVDCD Copy Cruiser Pro HS Stand Alone DVD CD Duplicator User Guide

							www.aleratec.com25
Using the DVD/CD Duplicator
Main Menu
Edit Track - continued 
Repeat for all tracks you want to copy. Then use the arrow keys to move to 
5. 
“End”, then press the  ENT button to finish disc editing. Use the arrow keys 
to make “Yes” or “No” selection. Select “Yes” by pressing the  ENT button.
The LCD will display the status of the copying process. At the completion 
6. 
of the copying process, the LCD will display the “Burn Complete!” \
message. Press the ENT button to continue to step 7.
The system will display: “Continue Edit”, “Next Disc? Yes”. Use the arrow 
7. 
keys to make “Yes” or “No” selection. To continue, select “Yes” to select 
tracks from the next disc. Repeat steps 1 - 7 above. If yes is selected,\
 the 
source disc will be ejected. Insert another audio disc to be edited.
Select Track:
End  1Trk03:35

ESCENT
End edit disc
and burn?  Yes

ESCENT
Copying  Edit
1/10   > 1/1

ESCENT-
Burn Complete!
OK: 03

ESCENT
Continue edit
next Disc?  Yes

ESCENT 
						

							www.aleratec.com
26
Using the DVD/CD Duplicator
Main Menu
Edit Track - continued 
When you have finished and the display shows: “Continue Edit”, Next 
8. 
Disc? Yes”, use the arrow keys to make “Yes” or “No” selection. Select 
“No”.
The system will ask to close the disc session. “Close all disc’s session? 
9. 
Yes”. Use the arrow keys to make “Yes” or ‘No” selection. Select “Yes”.
LCD display will show the process of closing the session: “Closing Se\
ssion 
10. 
Please Wait —”. 
Note: You will NOT be able to use the new audio CD until you close the 
session.
When the session is closed, this message will be displayed.
11. 
Continue edit
next Disc?  No

ESCENT
Close all disc’s
session?  Yes

ESCENT
Closing Session
Please wait - - -

ESCENT
Closing Complete
OK:03  Fail:0

ESCENT 
						

							www.aleratec.com27
Using the DVD/CD Duplicator
Main Menu
Edit Track - continued 
10.2 (Not supported)
10.3 Play Audio Track
By selecting “Play Audio” you can play music with your DVD/CD Duplicator. 
You can connect headphones or speakers to the headphone jack on the DVD/
CD-ROM or the speaker jacks on the back of the unit.
Load the CD you want to play in that drive and press the 
1.  ENT button to 
play music. Press ESC to index to the next setting.
10-03 Edit Track
Play Audio Track

ESCENT
Select Track
1/10  04:25

ESCENT
Playing Track-1
00:00 / 03:35

ESCENT 
						

							www.aleratec.com
28
Using the DVD/CD Duplicator
Main Menu
Edit Track - continued 
10.4 Close Session
Selecting “Close Session” will finalize the disc; no further data can be added. 
This function will make the disc readable on a normal CD player.
Press the 
1.  ENT button to enter the setting, or press  ESC to index to the next 
setting.
The system will ask to close the disc session. “Close all disc’s session? 
2. 
Yes”. Use the arrow keys to make “Yes” or ‘No” selection. Select “Yes”.
LCD display will show the process of closing the session: “Closing Se\
ssion 
3. 
Please Wait —”.
When the session is closed, this message will show the passed and failed\
 
4. 
discs.
10-04 Edit Track
Close Session

ESCENT
Close all disc’s
session? Yes

ESCENT
Close Session
Please Wait---

ESCENT
Close Complete
OK:03  Fail:0

ESCENT 
						

							www.aleratec.com29
Using the DVD/CD Duplicator
Main Menu
Setup
You can change the original default settings using this setup menu. There are 
different settings to control the duplicator’s operation. In general, using the 
original default settings for optimal performance is suggested.
This function includes 18 subfunctions. These are:
11.01 Language (LCD Type 1: English)
• 
11.02 CD Burn Speed
• 
11.03 DVD Burn Speed
• 
11.04 Read Speed (Maximum)
• 
11.05 Auto Drive Start
• 
11.06 Startup Menu
• 
11.07 Auto Verify 
• 
11.08 Auto compare
• 
11.09 Auto Prescan
• 
11.10 Eject Disc
• 
11.11 Burn On The Fly
• 
11.12 Burn Mode
• 
11.13 Display Time
• 
11.14 Button Sound
• 
11.15 Device Info
• 
11.16 System Info
• 
11.17 Quick Erase Disc
• 
11.18 Full Erase Disc
•  
						

							www.aleratec.com
30
Using the DVD/CD Duplicator
Main Menu
Setup
11.01 Language (Optional)
This function selects the language shown on the display (English, Traditional 
Chinese, Simplified Chinese, and Japanese). 
To select, press the 
1.  ENT button, or ESC to exit.
11.02 CD Burn Speed
This setting controls the maximum CD writing speed of the DVD/CD-
Recorders. The default setting is “Auto”, which will use the highest writing \
speed of the recorders. Sometimes maximum writing speed causes a high fa\
ilure 
rate due to poor CD quality or unstable CD writing due to high speed. Lo\
wering 
the writing speed will increase the probability of making successful cop\
ies. Press the 
1.  ENT button to change the setting, or  ESC to exit.
Use the arrow buttons to select the desired speed, then press the 
2.  ENT 
button. 
11-01. Setup
Language

ESCENT
11-02. Setup
CD Burn Speed

ESCENT
CD Burn Speed
Auto

ESCENT 
						

							www.aleratec.com31
Using the DVD/CD Duplicator
Main Menu
Setup - continued 
11.03 DVD Burn Speed
This setting controls the maximum DVD writing speed of the DVD/CD 
Recorders. The default setting is “Auto”, which will use the highest writing \
speed of the recorders. Sometimes maximum writing speed causes a high fa\
ilure 
rate due to poor CD quality or unstable CD writing due to high speed. Lo\
wering 
the writing speed will increase the probability of making successful cop\
ies.
Press the 
1.  ENT button to change the setting, or  ESC to exit.
Use the arrow buttons to select the desired speed, then press the 
2.  ENT 
button.
11.04 Read Speed
This function sets the reading speed of the source DVD/CD-ROM. Press the 
1.  ENT button to change the setting, or  ESC to exit.
Use the arrow buttons to select the desired reading speed, then press th\
e 
2. 
ENT button.
11-03. Setup
DVD Burn Speed

ESCENT
DVD Burn Speed
Auto

ESCENT
11-04. Setup
Read Speed

ESCENT
Read Speed
Maximum

ESCENT 
						

							www.aleratec.com
32
Using the DVD/CD Duplicator
Main Menu
Setup - continued 
11.05 Auto Start Drive
The function of the Auto Start Drive is to copy or test automatically once blank 
discs are loaded into recorders. 
Default setting is “Off”. Press 
1.  ENT button to change, or ESC to exit. 
11.06 Startup Menu
This function selects the menu item that will be the first item shown on the 
display when you turn on the duplicator. The default setting is Copy. Use the arrow buttons to select the desired item (1 - 11), then press the 
1.  ENT 
button.
11-05. Setup
Auto Start Drive

ESCENT
Auto Start Drive
Off

ESCENT
11-06. Setup
Startup Menu

ESCENT
Startup Menu
1.Copy

ESCENT 
						

							www.aleratec.com33
Using the DVD/CD Duplicator
Main Menu
Setup - continued 
11.07 Auto Verify
This setting controls auto verify on the target discs.
Default setting is “Off”; press the 
1.  ENT button to change, or ESC to exit.
11.08 Auto Compare
This setting controls auto compare of data between source and target discs after 
copying. Default setting is “Off”; press the 
1.  ENT button to change, or ESC to exit.
11-07. Setup
Auto Verify

ESCENT
Auto Verify
Off

ESCENT
11-08. Setup
Auto Compare

ESCENT
Auto Compare
Off

ESCENT 
						

							www.aleratec.com
34
Using the DVD/CD Duplicator
Main Menu
Setup - continued 
11.09 Auto Prescan
This setting controls auto prescan of the master to verify that it can b\
e read 
properly, and also tests the reading speed.
Default setting is “Off”; press the 
1.  ENT button to change, or ESC to exit.
11-09. Setup
Auto Prescan

ESCENT
Auto Prescan
Off

ESCENT
11-09. Setup
Auto Prescan

ESCENT