Aleratec 11 DVDCD Copy Cruiser Pro HS Stand Alone DVD CD Duplicator User Guide

							www.aleratec.com35
Using the DVD/CD Duplicator
Main Menu
Setup - continued 
11.10 Eject Disc
This setting controls the ejection of discs by the DVD/CD-Recorder. Three 
options are available: “Eject Good Only”, “Eject All Disc”, and “Do Not Eject”.
“Eject Good Only” will only eject the passed disc automatically an\
d leave a 
1. 
failed disc in the DVD/CD-Recorder.
“Eject All Disc” will eject the disc, whether it has passed or failed.
2. 
If you select “Do Not Eject”, the disc will remain in the DVD/CD-R\
ecorder 
3. 
when the job is done and you will have to eject the disc from the DVD/CD\
-
Recorder manually. Press the ENT button to change the setting, or  ESC to 
exit.
Eject Disc
Eject Good Only

ESCENT
11-10. Setup
Eject Disc

ESCENT
Eject Disc
Eject All Disc

ESCENT
Eject Disc
Do Not Eject

ESCENT 
						

							www.aleratec.com
36
Using the DVD/CD Duplicator
Main Menu
Setup - continued 
11.11 Burn On The Fly
If a disc that contains data is placed in the source drive it will autom\
atically 
become the source and burn directly to the target drive with this setting “On”. 
This setting should always be “On”. Data will copy directly from t\
he source 
drive to the target drives.
Default setting is “On”; press the 
1.  ENT button to change, or ESC to exit.
11.12 Burn Mode
This setting controls the writing modes of the disc, including “Disc \
At Once” 
(DAO) or “Track At Once” (TAO). Default setting is “DAO”. Press the 
1.  ENT button to change, or ESC to exit.
Burn On The Fly
On

ESCENT
11-11. Setup
Burn On The Fly

ESCENT
Burn Mode
DAO

ESCENT
11-12. Setup
Burn Mode

ESCENT 
						

							www.aleratec.com37
Using the DVD/CD Duplicator
Main Menu
Setup - continued 
11.13 Display Time
This setting controls the time display. 
Default setting is “On”; press the 
1.  ENT button to change, or ESC to exit.
11.14 Button Sound
This setting controls the button sound.  Default setting is “On”; press the 
1.  ENT button to change, or ESC to exit.
Display Time
On

ESCENT
11-13. Setup
Display Time

ESCENT
Button Sound
On

ESCENT
11-14. Setup
Button Sound

ESCENT 
						

							www.aleratec.com
38
Using the DVD/CD Duplicator
Main Menu
Setup - continued 
11.15 Device Info
This function will show information about the DVD-ROM and the DVD-
Recorder.
Press the 
1.  ENT button to see Device Information, or  ESC to exit. 
11.16 System Info
This function will show the system information on the display. Press the 
1.  ENT button to see the system information, or  ESC to exit.
System Info

ESCENT
11-16. Setup
System Info

ESCENT
11-15. Setup
System Info

ESCENT 
						

							www.aleratec.com39
Using the DVD/CD Duplicator
Main Menu
Setup - continued 
11.17 Quick Erase Disc
This function is used for quickly erasing DVD/CD-RW discs. 
Note: The Quick Erase Disc simply deletes the directory track, rather than 
deleting all the data from the disc (contrast this with Full Erase Disc\
).
Press the 
1.  ENT button to enter Quick Erase Disc, or  ESC to exit. Use the 
arrow keys to select Yes or No, and then press the ENT button to execute, 
ESC to go back.
When the process is finished the display will show the status.
2. 
All data will be
lost, erase? Yes

ESCENT
11-17. Setup
Quick Erase Disc

ESCENT
Quick Erase
OK:01  Fail:00

ESCENT
Erasing disc
00:24  (Quick)

ESCENT 
						

							www.aleratec.com
40
Using the DVD/CD Duplicator
Main Menu
Setup - continued 
11.18 Full Erase Disc
This function is similar to the [Quick Erase Disc], except it removes al\
l the 
data from the DVD/CD-RW disc. The more data on the DVD/CD-RW disc, the 
longer time it takes to erase the disc.
Press the 
1.  ENT button to enter Full Erase Disc, or  ESC to exit. Use the 
arrow keys to select Yes or No and then press the ENT button to execute, 
ESC to go back.
When the process is finished the display will show the status.
2. 
All data will be
lost, erase? Yes

ESCENT
11-18. Setup
Full Erase

ESCENT
Full Erase
OK:01  Fail:00

ESCENT
Erasing Disc
00:24  (Full)

ESCENT 
						

							www.aleratec.com41
Using the DVD/CD Duplicator
Main Menu
Advanced Setup
Some advanced setup functions allows users to change the system configuration. 
Modification should only be made when you are fully familiar with all the 
functions. To enter this function, press and hold the  ESC button for about 2 
seconds.
The main menu “Adv Setup” (Advanced Setup) function has 16 subfu\
nctions. 
These are:
12.01 UnderRun Protect
• 
12.02 Overburn
• 
12.03 Read Error Skip
• 
12.04 (Not supported)
• 
12.05 (Not supported)
• 
12.06 Burn-in
• 
12.07 Update Firmware
• 
12.08 Compare Firmware
• 
12.09 Hardware Diagnostic
• 
12.10 Load Default
• 
12.11 CD&G Format (Not supported)
• 
12.12 ISRC
• 
12.13 CD-TEXT (Not supported)
• 
12.14 USB Option
• 
12.15 USB Auto-Link
• 
12.16 Use Big Block
•  
						

							www.aleratec.com
42
Using the DVD/CD Duplicator
Main Menu
Advanced Setup - continued 
12.01 UnderRun Protect
This setting turns Buffer Under Run Protection (also known as “Burn Proof”, 
“SafeBurn”, “JustLink”, “Seamless Link”, etc.) on or off.
Default setting is “On”; press the 
1.  ENT button to change, or ESC to exit.
12.02 Overburn
This function will allow you to burn a few MB more than the standard cap\
acity 
of the target Audio CD (e.g. 75 minutes of recording time vs. 74 minutes).
You can activate the overburn function of the DVD/CD-Recorder through thi\
s 
setting. Default setting is “Off”; press the 
1.  ENT button to change, or ESC to exit.
UnderRun Protect
On

ESCENT
12-01. Adv Setup
UnderRun Protect

ESCENT
Overburn
Off

ESCENT
12-02. Adv Setup
Overburn

ESCENT 
						

							www.aleratec.com43
Using the DVD/CD Duplicator
Main Menu
Advanced Setup - continued 
12.03 Read Error Skip
You can set error skipping function while reading discs with errors. The default 
setting is “Off”. If an error is detected during source loading, the duplicator wil\
l 
stop loading and display the error message. If the setting is “On”\
, there will be 
no message shown even if there is an error in reading. You can use this function 
to copy some DVD/CDs with errors.
P
1.  ress the ENT button to change, or  ESC to exit.
12.04 Not Supported
12.05 Not Supported
Read Error Skip
Off

ESCENT
12-03. Adv Setup
Read Error Skip

ESCENT 
						

							www.aleratec.com
44
Using the DVD/CD Duplicator
Main Menu
Advanced Setup - continued 
12.06 Burn-in
Burn-in is a test function. You can set up to test continuously or for a specified 
number of cycles. 
Load Blank DVD/CD media in the DVD/CD-Recorder and a source disc in 
1. 
the DVD/CD-ROM drive. The copy process will be simulated, but data will 
not be written to the target discs. 
Note: Burn In is not supported by DVD+R/RW discs.
Go to Burn-in and press the 
2.  ENT button to enter. You can select Test to 
simulate duplication of DVDs/CDs or Erase and Copy to test DVD/CD-RW 
erase and write. Use the arrow key to select Continuous or the number of\
 
test cycles you want to run. Press the  ENT button to start the test, or ESC to 
go back to manual operation.
Select “Erase&Copy” to test erasing and rewriting to DVD/CD-RW discs 
3. 
only.
Burn-in
Test

ESCENT
12-06. Adv Setup
Burn-in

ESCENT
Set Burn-in num:
Run Continuous

ESCENT
Burn-in
Erase&Copy

ESCENT