Aimco Brakes Monitor UTM1500 Fastening Counter Manual
Here you can view all the pages of manual Aimco Brakes Monitor UTM1500 Fastening Counter Manual. The Aimco Brakes manuals for Monitors are available online for free. You can easily download all the documents as PDF.
Page 31
31 MEMORY WORK Make a choice among 1, 2, 3, 4, and ALL alternatives by using keys and specify WORK No. to call up on DISPLAY column. When ALL is selected, data pertaining to WORK 1~4 will be displayed altogether. Numbers to be shown in ( ) indicate data number. DISPLAY Select any of the items to call up. DATA :Numeric data in memory will be displayed. ANALSIS :Mean values and/or sigma values will be displayed. ・When is pressed down, the particulars of the item...
Page 32
32 Tool management(tool management) This function is specifically designed to notify operators of Tool maintenance timing, and when the preset Cycle Count or Cumulative Count has been attained, the timing will be notified through the means of LCD display, Buzzer and Terminal Block output. Cycle Count : Current total fastening number of Tool now in use. “CYC. COUNT” will be indicated on LCD display. Cumulative Count : Current total pulse number of Tool now in use. “PULS. NOS.” will be...
Page 33
33 PULS.NOS.1 : Cumulative Pulse 1 PULS.NOS.2 : Cumulative Pulse 2 Setting Range : 0~9999999 pulses You must make setting PULS. NOS. 1
Page 34
34 (3)CUMULATIVE COUNT Current Cycle Count and Cumulative Pulse Number Display and Clear: CYC.COUNT : Current cycle count PULS.NOS. : Current cumulative pulse number CLEAR : Cycle count and cumulative pulse number clearing ・Selecting CLEAR will call up the following window. ・Selecting YES will clear the current cycle count and cumulative pulse number and then call back CUMULATIVE COUNT screen. ・Selecting NO will call back CUMULATIVE COUNT screen without clearing the numbers....
Page 35
35 Pressure Value Setting Pressure value setting without using Automatic Setting Function (1)In the case of Shut-off Tool (TM) ・Connect Tool in the first place ・Touch key for more than 3 seconds and start “MENU” screen. ・Set TOOL to SHUT-OFF TYPE on “SET UP” screen. ・Then, select “SENSOR”. Select “NO DISPLAY” when a private pressure sensor will be used and select “DISPLAY” when a digital pressure sensor will be used. ・Return to “MENU” screen by touching key, and touch...
Page 36
AIMCO CORPORATE HEADQUARTERS 10000 SE Pine Street Portland, Oregon 97216 Phone: (503) 254– 6600 Toll Free: 1 -800- 852-1368 AIM CO CHINA Room 607, No. 3998 Hongxin Rd Dibao Plaza Minhang District, Shanghai China Phone: 0086 -21- 34319246 Fax: 0086- 21-34319245 LIT-MA N720 Rev. 03/2016 Printed in USA ©2016 AIMCO AIMCO C ORPORATION D E MEXICO S A DE CV Ave. C ristobal C olon 14529 Chihuahua, C hihuahua. 31125 Mexico P hone: ( 01-614) 380- 1010 Fax: (01 -614) 380- 1019...