Aimco Brakes Monitor UTM1500 Fastening Counter Manual
Have a look at the manual Aimco Brakes Monitor UTM1500 Fastening Counter Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 85 Aimco Brakes manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 26
26
TIMER
①INITIAL. E [msec] (initial error detection timer)
Initial Value : 0
Setting Range : 0~9999 (0 setting when you do not use this function)
Functions
・Timer will start at the time when the pressure attained the preset fastening start pressure, and
error will be detected when the preset shut-off pressure is attained before time-out.
・This is on-a-WORK No. basis setting.
②CYCLE. E. [msec] (cycle error detection timer)
Initial Value : 0
Setting Range :...](http://img.usermanuals.tech/thumb/236/3662/w64_monitor-utm1500-fastening-counter-manual-1478639890_d-25.png "Page 26
26
TIMER
①INITIAL. E [msec] (initial error detection timer)
Initial Value : 0
Setting Range : 0~9999 (0 setting when you do not use this function)
Functions
・Timer will start at the time when the pressure attained the preset fastening start pressure, and
error will be detected when the preset shut-off pressure is attained before time-out.
・This is on-a-WORK No. basis setting.
②CYCLE. E. [msec] (cycle error detection timer)
Initial Value : 0
Setting Range :...")
![Page 27
27
⑤ON [msec] (ON Timer)
Initial Value : 0
Setting Range : 0~9999
・This is on-a-WORK No. basis setting.
⑥OFF [msec] (OFF Timer)
Initial Value : 0
Setting Range : 0~9999
・This is on-a-WORK No. basis setting.
⑦OK [msec] (Fastening OK Output Timer)
Initial Value : 1000
Setting Range : 0~9999（Output will be held up to the next fastening start point in the case of
0 setting.）
Functions
・This is fastening OK terminal’s output time
・Output will be turned OFF even before time-out...](http://img.usermanuals.tech/thumb/236/3662/w64_monitor-utm1500-fastening-counter-manual-1478639890_d-26.png "Page 27
27
⑤ON [msec] (ON Timer)
Initial Value : 0
Setting Range : 0~9999
・This is on-a-WORK No. basis setting.
⑥OFF [msec] (OFF Timer)
Initial Value : 0
Setting Range : 0~9999
・This is on-a-WORK No. basis setting.
⑦OK [msec] (Fastening OK Output Timer)
Initial Value : 1000
Setting Range : 0~9999（Output will be held up to the next fastening start point in the case of
0 setting.）
Functions
・This is fastening OK terminal’s output time
・Output will be turned OFF even before time-out...")
31 ＭＥＭＯＲＹ ＷＯＲＫ Make a choice among 1, 2, 3, 4, and ALL alternatives by using keys and specify WORK No. to call up on DISPLAY column. When ALL is selected, data pertaining to WORK 1~4 will be displayed altogether. Numbers to be shown in ( ） indicate data number. ＤＩＳＰＬＡＹ Select any of the items to call up. ＤＡＴＡ ：Numeric data in memory will be displayed. ＡＮＡＬＳＩＳ ：Mean values and/or sigma values will be displayed. ・When is pressed down, the particulars of the item selected at DISPLAY column according to the Work No. selected at WORK column will be displayed. ＥＲＡＳＥ Make a choice among 1, 2, 3, 4, and ALL (1~4 all inclusive) by using keys and specify WORK No. of which memory data you intend to erase. When is pressed, memory data corresponding to the selected WORK No. will be erased. ＢＡＵＤ ＲＡＴＥ（transmission speed） Set data transmission speed matching PC you will use. Initial Value : 38400 [bps] Setting Values : 19200, 38400, 57600, 115200 ＊ ＊ ＊ ＭＥＭＯＲＹ ＊ ＊ ＊ ■ＷＯＲＫ ： １（１２５） ＤＩＳＰＬＡＹ ： ＤＡＴＡ ＥＲＡＳＥ ： １ ＊ ＊ ＢＡＵＤ ＲＡＴＥ ＊ ＊ ＢＡＵＤ ＲＡＴＥ ： ３８４００ｂｐｓ
32
Ｔｏｏｌ ｍａｎａｇｅｍｅｎｔ（tool management）
This function is specifically designed to notify operators of Tool maintenance timing, and when the
preset Cycle Count or Cumulative Count has been attained, the timing will be notified through the
means of LCD display, Buzzer and Terminal Block output.
Cycle Count : Current total fastening number of Tool now in use.
“CYC. COUNT” will be indicated on LCD display.
Cumulative Count : Current total pulse number of Tool now in use.
“PULS. NOS.” will be indicated on LCD display.
（１）ＴＯＯＬ
Make entries necessary to specify Tool; including Tool No. and Model.
How to make entries
・Put the cursor on any alphanumeric, space, “-”and “.”character arranged on the 3
rd and 4th lines
by moving the arrow key and press
key. Then the character you selected will be put on
the cursor position on the TOOL column on the 2
nd line.
・To erase the last character of TOOL column, touch RESET key.
・To return to Tool Management MENU screen, press
key while putting the cursor on END.
・Up to 15 characters can be entered.
（２）ＯＵＴ ＳＥＴ
Enter Cycle Count and Cumulative Pulse Number intended for maintenance works.
ＣＹＣ．ＣＯＵＮＴ１ : Cycle Count 1
ＣＹＣ．ＣＯＵＮＴ２ : Cycle Count 2
Setting Range : 0~999999
You must make setting CYC. COUNT1
33 ＰＵＬＳ．ＮＯＳ．１ : Cumulative Pulse 1 ＰＵＬＳ．ＮＯＳ．２ : Cumulative Pulse 2 Setting Range : 0~9999999 pulses You must make setting PULS. NOS. 1
34 （３）ＣＵＭＵＬＡＴＩＶＥ ＣＯＵＮＴ Current Cycle Count and Cumulative Pulse Number Display and Clear: ＣＹＣ．ＣＯＵＮＴ : Current cycle count ＰＵＬＳ．ＮＯＳ． : Current cumulative pulse number ＣＬＥＡＲ : Cycle count and cumulative pulse number clearing ・Selecting CLEAR will call up the following window. ・Selecting YES will clear the current cycle count and cumulative pulse number and then call back CUMULATIVE COUNT screen. ・Selecting NO will call back CUMULATIVE COUNT screen without clearing the numbers. ＊ ＣＵＭＵＬＡＴＩＶＥ ＣＯＵＮＴ ＊ ■ＣＹＣ．ＣＯＵＮＴ ： ３００００ ＰＵＬＳ．ＮＯＳ． ： ２０００００ ＣＬＥＡＲ ＥＲＡＳＥ ＣＯＵＮＴ ＤＡＴＡ ＣＯＮＦＩＲＭ ＡＮＤ ＧＯ ＯＮ！ ■ＮＯ ＹＥＳ
35
Pressure Value Setting
Pressure value setting without using Automatic Setting Function
（１）In the case of Shut-off Tool (TM)
・Connect Tool in the first place
・Touch
key for more than 3 seconds and start “MENU” screen.
・Set TOOL to SHUT-OFF TYPE on “SET UP” screen.
・Then, select “SENSOR”. Select “NO DISPLAY” when a private pressure sensor will be
used and select “DISPLAY” when a digital pressure sensor will be used.
・Return to “MENU” screen by touching
key, and touch key again to return to
the measurement screen.
・Read Free Running, Blow and Shut-off pressure values on the measurement screen.
・Enter a midrange value between Free Running and Blow pressures in the “LEVER ON”
column on the “SET UP” screen.
・Enter a midrange value between Blow and Shut-off pressures in the “SHUT-OFF”
column.
・Check operating conditions on the measurement screen.
（２）In the case of TM Type Tool
・Connect Tool in the first place.
・Touch
key for more than 3 seconds and start “MENU” screen.
・Set TOOL to TM TYPE on “SET UP” screen.
・Then, select “SENSOR”.
・Return to “MENU” screen by touching
key, and touch key again to return to
the measurement screen.
・Read Free Running and Blow pressure values on the measurement screen.
・Enter a value not exceeding Free Running pressure in LEVER ON column on “SET UP”
screen.
・Enter a midrange value between Free Running and Blow pressures in the “BLOW
START” column.
・Check operating conditions on the measurement screen.
（３）In the case of Standard Tool
・Connect Tool in the first place.
・Touch
key for more than 3 seconds and start “MENU” screen.
・Set TOOL to NON-SHUT TYPE on “SET UP” screen.
・Then, select “SENSOR”.
・Return to “MENU” screen by touching
key, and touch key again to return to
the measurement screen.
・Read Tool Stop, Free Running and Blow pressure values on the measurement screen.
・Enter a midrange value between Tool Stop and Blow pressures in the “LEVER ON”
column on “SET UP” screen.
・Enter a midrange value between Free Running and Blow pressures in the “BLOW
START” column.
・Check operating conditions on the measurement screen.
AIMCO CORPORATE HEADQUARTERS 10000 SE Pine Street Portland, Oregon 97216 Phone: (503) 254– 6600 Toll Free: 1 -800- 852-1368 AIM CO CHINA Room 607, No. 3998 Hongxin Rd Dibao Plaza Minhang District, Shanghai China Phone: 0086 -21- 34319246 Fax: 0086- 21-34319245 LIT-MA N720 Rev. 03/2016 Printed in USA ©2016 AIMCO AIMCO C ORPORATION D E MEXICO S A DE CV Ave. C ristobal C olon 14529 Chihuahua, C hihuahua. 31125 Mexico P hone: ( 01-614) 380- 1010 Fax: (01 -614) 380- 1019 AIMCO S PAIN Avenida R ío Gallo, 4 31 19174 Galápagos - Guadalajara Spain P hone: + 34 673 34 99 25