AGFA AP SELECTA16 User Manual

							68
AgfaPhoto SELECTA 16AgfaPhoto SELECTA 16
6869
FW Version (Firmware Version)
Use ths settng to vew the current camera firmware 
verson.
Select FW Version
 
 n the Fle/Software menu, then press 
Rght.
Reset Settings
Use ths settng to restore the camera to ts default 
settngs.
1.  Select Reset Sett
 ngs n the Fle/Software menu, then 
press Rght.
2.  Use the Up/Down nav
 gaton buttons to select Yes or 
No. Then press the  button to confirm the settng. 
						

							AgfaPhoto SELECTA 16AgfaPhoto SELECTA 16
6869
The vdeo output sgnal can be swtched to NTSC or PAL to 
accommodate dfferent regonal standards. The approprate 
settng wll vary between regons.
NTSC:  USA, Canada, Ta
 wan, Japan, etc.
PAL:  Europe, Asa (excludng Tawan), Oceana, etc.
Note:   
The TV output w
 ll not dsplay properly f an 
ncorrect vdeo system s selected.
Use ths feature to swtch the vdeo system from ether 
NTSC or PAL.
1.

  Select  Video System 
 n the Transmsson menu, then 
press Rght.
2.  Use the  Up/Down nav
 gaton buttons to select NTSC or 
PAL. Then press the  button to confirm. 
Vdeo System
CONNECTIONS 
						

							7071
AgfaPhoto SELECTA 16 AgfaPhoto SELECTA 16
AgfaPhoto SELECTA 16 AgfaPhoto SELECTA 16
Connectng to a PC
Use the USB cable and ArcSoft software (CD-ROM) suppled 
wth your camera to copy (transfer) pctures to a computer.
Setting the USB mode
Snce the camera’s USB port can be set to connect wth 
ether a PC or a Prnter, the followng steps wll allow you to 
ensure that the camera s correctly configured to connect 
wth a PC.
1.  Go to the Transmsson menu, then select USB 
connecton wth the Up/Down button, and press the 
Rght button.
2.  Use the  Up/Down
 nav
 gaton buttons to select  PC
.
3.
  Press the 
 button to confirm the settng.
Transferring files to your PC
The computer wll automatcally detect the camera as a 
removable drve. Double-clck the  My
 Computer
  con on the 
desktop to locate the removable drve and to copy folders 
and files n the drve to a drectory on your PC as you would 
copy any typcal folder or file.
By usng the USB cable, you can transfer the captured 
photos and vdeos to a PC. Follow the steps below to 
connect the camera to a PC.
1.

  Start a computer n whch ArcSoft software has been 
nstalled.
2.  Make sure both the camera and PC are turned on. 
3.  Connect one end of the suppled USB cable to the USB/
AV OUT port on your camera.
4.

  Connect the other end of the cable to an avalable USB 
port on your PC. 
						

							7071
AgfaPhoto SELECTA 16 AgfaPhoto SELECTA 16
71
AgfaPhoto SELECTA 16AgfaPhoto SELECTA 16
Wndows operatng system (Wndows 2000, Wndows 
XP, Wndows Vsta, Wndows 7.)
Clck the [Safely remove the hardware] con and remove 
the USB connector accordng to the appeared menu.
Macntosh
Drag the unttled con to the Trash. ("Unttled")
5. Dsconnect the camera once transfer s completed.
If the USB option is set to [PC]  :
Turn the camera off and d

sconnect the USB cable.
If the USB option is set to [PC (PTP) ] :
Remove the camera from the system as descr
 bed below 
before turnng the camera off and dsconnectng the USB 
cable. 
						

							7273
AgfaPhoto SELECTA 16 AgfaPhoto SELECTA 16
AgfaPhoto SELECTA 16 AgfaPhoto SELECTA 16
Connectng to a PctBrdge Compatble Prnter
PctBrdge allows prntng mages from a 
memory card n a dgtal camera drectly to a 
prnter, regardless of brand. To find out f a 
prnter s PctBrdge compatble, smply look 
for the PctBrdge logo on the packagng or 
check the manual for specficatons. Wth 
the PctBrdge functon on your camera, you can prnt the 
captured photos drectly to a PctBrdge compatble prnter 
usng the suppled USB cable, wthout the need for a PC.
Setting the USB mode
Snce the camera’s USB port can be set to connect wth 
ether a PC or a Prnter, the followng steps wll ensure 
that the camera s correctly configured to connect wth a 
Prnter.
1.  Go to the camera's Transmsson menu and, select USB 
connecton wth the Up/Down button, then press the 
Rght button.
2.  Use the  Up/Down button and select Pr
 nter.3. 
Press the 
 button to confirm the settng.
After the camera s reset, t wll swtch to PC mode 
automatcally from USB mode. 
						

							7273
AgfaPhoto SELECTA 16 AgfaPhoto SELECTA 16
73
AgfaPhoto SELECTA 16AgfaPhoto SELECTA 16
Connecting the camera and printer.
1. Make sure both the camera and prnter are turned on. 
2.  Connect one end of the suppled USB cable to the USB 
port on your camera.
3.

  Connect the other end of the cable to the USB port on 
the prnter.
If the camera s not connected to a PctBrdge compatble 
prnter, the followng error message wll appear on the LCD 
screen.
The above error message would also appear f the 
USB mode were set ncorrectly, n whch case you 
should dsconnect the USB cable, check the USB 
mode settngs, ensure that the Prnter s turned on, 
and then try connectng the USB cable agan. 
						

							7475
AgfaPhoto SELECTA 16 AgfaPhoto SELECTA 16
AgfaPhoto SELECTA 16 AgfaPhoto SELECTA 16
After settng the USB mode to Prnter, the PictBridge menu 
w
ll appear. 
Select a menu tem wth the Up/Down button and press 
the Rght button or  button to enter the tem.
Refer to the followng sectons for more detaled nforma -
t

on on each settng.
Print with date
If you have set the date and tme on your camera, the date 
and tme wll be recorded and saved wth each photo you 
take.
1.

  Select Print with date from the PictBridge menu. The 
follow

ng screen wll appear.
2.  Use the Left/Right nav gaton buttons to scroll through 
the photos.
Usng the PctBrdge Menu 
						

							7475
AgfaPhoto SELECTA 16 AgfaPhoto SELECTA 16
75
AgfaPhoto SELECTA 16AgfaPhoto SELECTA 16
3. Use the Up/Down nav gaton buttons to select the 
number of prnts for the current dsplayed photo.
4.  Press the 
 button and the followng screen wll 
appear.
5.  Select Yes to prnt or ext, then press  button agan. 
Print without date
Use ths settng to prnt the photos wthout dates on them. 
1. Select  Print without date from the PictBridge menu. 
The follow

ng screen appears.
2.  Use the Left/Right nav gaton buttons to scroll through 
the mages.
3.  Use the  Up/Down nav
 gaton buttons to select the 
number of prnts for the current dsplayed mage.
4.  Press the 
 button and the followng screen wll 
appear. 
						

							76
AgfaPhoto SELECTA 16AgfaPhoto SELECTA 16AgfaPhoto SELECTA 16AgfaPhoto SELECTA 16
5. Select Yes to prnt or ext, then press the  button 
agan.
Print index
You can use ths settng to prnt an ndex of all the photos 
currently n your camera's memory.
1.  Select  Print index from the PictBridge menu. The 
follow

ng screen wll appear.
2.  Select  Yes  to  pr nt  or  ex t,  then  press  the   button 
agan. 
						

							AgfaPhoto SELECTA 16AgfaPhoto SELECTA 16
77
AgfaPhoto SELECTA 16AgfaPhoto SELECTA 16
Print DPOF (Digital Print Order Format)
To use DPOF prntng, you must make the selecton of pho-
tos for pr
ntng usng the DPOF settngs beforehand. See 
“ DPOF
” sect
 on on page 56.
1.  Select  Print
 DPOF
 from the  PictBridge
 menu.  The fol-
low

ng screen wll appear.
2.  Select Yes to prnt or ext, then press the  button 
agan.
Exit
To ext the PictBridge menu, select Exit. The “Remove USB 
cable” message w
ll be dsplayed.
Dsconnect the USB cable from the camera and prnter.