ADT Security Services Fall Detection Pendant User Guide

Frequently Asked Questions 
What happens if I fall?  
If you are able to, you should always press the blue  Emergency Help Button if you 
need help. If you are unable to press the button and a fall is detected by the Fall 
Detection Pendant , it waits for 20 to 30 seconds to check for normal movement 
before sending the emergency fall message. It then waits 20 additional seconds for 
manual cancellation. After this time, if no motion has occurred and the alarm is not 
cancelled manually, the alert is...

How do I manually call for help? 
Press the blue Emergency Help Button on the Fall Detection Pendant . An alarm will 
be sent to the monitoring center through the  Base Station or  Mobile Device . Once 
you communicate with an operator, if you are able to speak, please provide your 
status. If you fall and are not able to push your button, your fall will  be automatically 
detected and an alarm will be sent to the emergency response center through the 
Base Station  or Mobile Device. 
Is the Fall...

If I fall and stand up, will the Fall Detection Pendant still call for help? 
If the fall detect pendant  detects regular movement it may cancel the alarm on its own.  
Is the lanyard breakaway? 
Yes, with a tug the lanyard will break away.  
What do I do if I accidentally set off the Fall Detection Alarm ? 
If you accidentally set off the alarm, you can press and hold the blue Emergency Help 
Button for five seconds or until it flashes green to cancel the alarm. You can also 
press the blue RESET button...

FCC Statement 
This equipment has been tested and found to comply with the limits f or a Class B 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses, and can radiate radio frequency energy  and, if not 
installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that...

FCC Caution 
Any changes  or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate this equipment. This device 
complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions:  
    
 
Fall Detection Pendant User Guide   25 (1) This device may not create harmful interference, and (2) This device must accept any interference received, including interference that may
cause undesired operation.  

Technical Specifications 
Fall Detection Pendant 
Dimensions: 1.4” x 2.0” x 0.8” (35  mm x 53 mm x 20  mm) , W x L x H  
Weight:  1 oz (28 g) 
Battery Power:  3.6 VDC, 1200 mAh  
Battery Life:  Up to 18 months 
Signal Frequency:  433 MHz  
Operating Temp : 14°F to 122°F (

Contact ADT 
ADT agents are available 24 hours a day/7 days a week /365 days a year to assist 
you with your Fall Detection Pendant , Medical Alert Plus or On -th e-Go  Emergency 
Response systems.   
 For assistance call:  800.568.1216
Fall Detection Pendant User Guide
  27  

Legal Information 
Manufactured for ADT LLC dba ADT Security Services, Boca Raton FL 33431.  
An ADT Medical Alert System is not an intrusion detection or medical device and does not 
provide medical advice, which should be secured from qualified medical personnel. Fall 
detection is only available on Medical Alert Plus  and Mobile Emergency Response Systems. 
The System and Services rely on the availability of cellular network coverage to operate 
properly. These systems are not controlled by ADT. There...