Adam Equipment MUW Health and Fitness Scales User Manual

							EN 
© Adam E\buipm\fnt Company 2012    9        700660229r\fvA-Jul12 
6.0  PARAMETERS  
The bala\fce has 8 parameters where optio\fs ca\f be set by the \bser. 
FUNCTION  SECTION  DESCRIPTION 
F1
F1F1
F1 
  
 EL
ELEL
EL See sectio\f 6.1   Sets the backlight operatio\f 
Defa\blt is AUTO 
F2
F2F2
F2 
  
 OFF
OFFOFF
OFF 
  
 See sectio\f 6.2  A\bto off f\b\fctio\f 
Defa\blt is 10 
F
FF
F\b
\b\b
\b 
  
 SE
SESE
SER
RR
R See sectio\f 6.3  Sets the pri\fti\fg co\ftrol a\fd data tra\fsmissio\f speed  
Defa\blt is 9600 
F
FF
F4
44
4 
  
 \f
\f\f
\fT 
T T 
T S
SS
SEL
ELEL
EL 
  
  See sectio\f 6.4  Pri\fti\fg co\ftrols 
F
FF
F5
55
5 
  
 UL
ULUL
ULTR
TRTR
TRA
AA
A See sectio\f 6.5  Calibratio\f of the height se\fsor 
F6
F6F6
F6 
  
 HOLD
HOLDHOLD
HOLD See sectio\f 6.6  Sets the HOLD f\b\fctio\f to ON or OFF 
F7
F7F7
F7 
  
 D
DD
D-
--
-T
TT
T 
  
 See sectio\f 6.7  Setti\fg the date a\fd time 
F8
F8F8
F8 
  
 SET
SETSET
SET 
  
 U\f
U\fU\f
U\f 
  
 See sectio\f 6.8  Set \bp parameters 
F9
F9F9
F9 TECH
TECHTECH
TECH Service o\fly   
 
6.1
  SETTING\fTHE\fBA\bKLIGHT\fOPERATION\fF1
F1F1
F1 
  
 EL
ELEL
EL\f
The backlight f\b\fctio\f ca\f be set by the \bser. 
 
AUTO Sets the backlight to operate a\btomatically whe\f a weight is 
placed o\f the platform or a key is pressed. 
OFF Sets the backlight to be o\f at all times. 
ON Sets the backlight to be off at all times. 
 
1)  Switch  o\f  the  scale  the\f  press  the  [kg/lb] key  d\bri\fg  the  self-checki\fg 
test of the display. 
2)  The display will show the first f\b\fctio\f 
F1
F1F1
F1 
  
 EL
ELEL
EL.
..
.  
3)  Press the  [Z\fro] key to select 
F1
F1F1
F1 
  
 EL
ELEL
EL 
a\fd  show the c\brre\ft setti\fg, defa\blt 
is  AUTO. 
4)  Press  the  [Print]  key  to  cha\fge  the  setti\fg  for  the  backlight  a\fd  press 
[Z\fro] to save, the\f  [kg/lb] to select the \fext parameter. 
C  O  P Y  
						

							EN 
© Adam E\buipm\fnt Company 2012    10        700660229r\fvA-Jul12 
 
6.2\f SETTING
\fAUTO\fOFF\fF2
F2F2
F2 
  
 OFF
OFFOFF
OFF\f
A\f  a\btomatic  power  dow\f  time  ca\f  be  set  so  that  the  MUW  t\br\fs  off  after  a 
period where \fo activity is detected. This preserves the life time of the battery 
whe\f \bsed i\f this mode. 
Setti\fgs are OFF, 5, 10, 20, a\fd 30 mi\f\btes. 
1)  Switch  o\f  the  scale  the\f  press  the  [kg/lb] key  d\bri\fg  the  self-checki\fg 
test of the display. 
2)  The display will show the first f\b\fctio\f 
F1
F1F1
F1 
  
 EL.
EL.EL.
EL.  
3)  Press the  [kg/lb] key to select 
F2
F2F2
F2 
  
 OFF
OFFOFF
OFF 
  
    
a\fd the\f  [Z\fro] to e\fter a\fd  show 
the c\brre\ft setti\fg, defa\blt is  10. 
4)  Press  the  [Print]  key  to  cha\fge  the  setti\fg  for  the  backlight  a\fd  press 
[Z\fro] to save, the\f  [kg/lb] to select the \fext parameter. 
6.3\f SETTING
\fTHE\fPRINTING\f\bONTROLS\fF
FF
F\b
\b\b
\b 
  
 SE
SESE
SER
RR
R\f
The MUW ca\f be set to a\btomatically pri\ft “AUTO”, or pri\ft o\f dema\fd “PrN” 
by pressi\fg the  [Print] b\btto\f. 
The data tra\fsmissio\f speed “Bps” of the MUW m\bst match that of the Pri\fter 
or other device bei\fg \bsed to collect data i\fformatio\f s\bccessf\blly. 
The pri\fti\fg co\ftrol a\fd speed ca\f be selected as follows.  1)  Switch  o\f  the  scale  the\f  press  the  [kg/lb] key  d\bri\fg  the  self-checki\fg 
test of the display. 
2)  The display will show the first f\b\fctio\f 
F1
F1F1
F1 
  
 EL.
EL.EL.
EL.  
3)  Press the  [kg/lb] key to select 
F
FF
F\b
\b\b
\b 
  
 S
SS
SER
ERER
ER 
a\fd the\f  [Z\fro] to e\fter a\fd show 
the c\brre\ft pri\fti\fg co\ftrol setti\fg “UArt”. 
4)  Either  pri\fti\fg  o\f  dema\fd  (PrN),  pressi\fg  the  [Print]  key  followi\fg  a 
weighi\fg,  or  pri\fti\fg  a\btomatically  (AUTO),  a\btomatically  pri\fts  o\bt 
whe\f a stable readi\fg a\fd BMI calc\blatio\f is displayed ca\f be selected. 
C  O  P Y  
						

							EN 
© Adam E\buipm\fnt Company 2012    11        700660229r\fvA-Jul12 
5) Press  the  [Print]  key  to  cha\fge  the  setti\fg  for  the  pri\fti\fg  co\ftrol  a\fd 
press  [Z\fro] to save. 
6)  The  c\brre\ft  setti\fg  for  data  tra\fsmissio\f  speed  “Bps”  will  \fow  be 
displayed.  
600, 1200, 2400, 4800, 9600 are available. Defa\blt is 9600. 
Press the  [Print] key to cha\fge the setti\fg a\fd press  [Z\fro] to save. 
Test  will  be  displayed,  press  the  [Print]  key  to  se\fd  a  test  pri\ft 
comma\fd. 
7)  Press  [Z\fro]  to  save,  [cm/ft]  to  exit,  the\f  [kg/lb]  to  select  the  \fext 
parameter. 
 
 
6.4   PRINTING\fDETAIL\f\bONTROL\fF
FF
F4
44
4 
  
 \f
\f\f
\fT
TT
TS
SS
SE
EE
EL
LL
L 
  
 
The  MUW  ca\f  be  programmed  to  provide  a  c\bstomised  pri\ft  o\bt  to  give  yo\b 
the readi\fgs yo\b req\bire. Doctor, patie\ft, DiSP1, DiSP2, DiSP3 details ca\f all be 
e\fabled or disabled to s\bit the i\fformatio\f yo\b \feed to see. 
1)  Switch  o\f  the  scale  the\f  press  the  [kg/lb] key  d\bri\fg  the  self-checki\fg 
test of the display. 
2)  The display will show the first f\b\fctio\f 
F1
F1F1
F1 
  
 EL.
EL.EL.
EL.  
3)  Press  the  [kg/lb] key  to  select 
F4
F4F4
F4 
  
 \f
\f\f
\fT
TT
TS
SS
SE
EE
EL
LL
L 
  
  
a\fd  the\f  [Z\fro]  to  e\fter  a\fd 
show the c\brre\ft setti\fgs. 
SETTING  DESCRIPTION  SELECTIONS 
dr.Id Doctors Id \f\bmber 
ON/OFF 
\fAt.Id Patie\ft Id \f\bmber ON/OFF 
DiS\f 1 Display 1 shows the weight of the patie\ft ON/OFF 
DiS\f 2 Display 2 shows the height of the patie\ft 
ON/OFF 
DiS\f \b Display 3 shows the BMI of the patie\ft ON/OFF 
CAL Pri\ft o\bt followi\fg calibratio\f ON/OFF 
d-t Date a\fd time ON/OFF 
 
C  O  P Y  
						

							EN 
© Adam E\buipm\fnt Company 2012    12        700660229r\fvA-Jul12 
4)  Press  the [Print]  key to  cha\fge  the  setti\fg  for  the  pri\fti\fg  detail  co\ftrol 
a\fd press  [Z\fro] to save. 
5)  Press the  [kg/lb] key to exit a\fd co\fti\f\be. 
6.5\f
\fULTRASONI\b\fHEIGHT\f\bALIBRATION\fF
FF
F5
55
5 
  
 UL
ULUL
ULTR
TRTR
TRA
AA
A 
  
 
The Ultraso\fic height se\fsor has bee\f factory calibrated a\fd sho\bld \fot req\bire 
freq\be\ft  calibratio\f.  If  there  is  a  problem  with  height  meas\bri\fg  proceed  as 
below.  
1)  Switch  o\f  the  scale  the\f  press  the  [kg/lb] key  d\bri\fg  the  self-checki\fg 
test of the display. 
2)  The display will show the first f\b\fctio\f 
F1
F1F1
F1 
  
 EL.
EL.EL.
EL.  
3)  Press  the  [kg/lb] key  to  select 
F
FF
F5
55
5 
  
 U
UU
ULTRA
LTRALTRA
LTRA 
a\fd  the\f  [Z\fro]  to  e\fter  the 
se\fsor calibratio\f sectio\f “AdJUST” XX (XX bei\fg a factory set fig\bre) 
4)  Press the  [Z\fro] key a\fd the display will show “base- H 220”, press  [Z\fro] 
to calibrate the “Zero” height readi\fg. 
5)  The  display  will  show  “test”  a\fd  a  4  digit  \f\bmber.  Press  the  [Z\fro]  key 
from a positio\f where the height se\fsor ca\f\fot detect yo\b. 
6)  Whe\f calibratio\f is complete the display will show “AdJUST XX”. 
If after calibratio\f the height se\fsor is \fot meas\bri\fg correctly, press  [Print] or 
[Cl\far]  at  poi\ft  3  to  cha\fge  XX.  A  lower  \f\bmber  will  decrease  the  height 
meas\breme\ft a\fd a higher \f\bmber will i\fcrease it. The\f co\fti\f\be from poi\ft 4 
o\f. 
*A pri\ft o\bt with date a\fd time ca\f be iss\bed followi\fg every calibratio\f. 
6.6\f SETTING
\fTHE\fHOLD\fFUN\bTION\fF6
F6F6
F6 
  
 HOLD
HOLDHOLD
HOLD\f
The Hold f\b\fctio\f ca\f be set so that the height a\fd BMI readi\fgs are visible as 
they are bei\fg calc\blated  (OFF), or remai\f as dashes \b\ftil the weight readi\fg is 
stable \bpo\f where they will be displayed (ON). 
1)  Switch  o\f  the  scale  the\f  press  the  [kg/lb] key  d\bri\fg  the  self-checki\fg 
test of the display. 
C  O  P Y  
						

							EN 
© Adam E\buipm\fnt Company 2012    13        700660229r\fvA-Jul12 
2)  The display will show the first f\b\fctio\f 
  
 F1
F1F1
F1 
  
 EL.
EL.EL.
EL.  
3)  Press  the  [kg/lb] key  to  select 
F
FF
F6
66
6 HOLD
HOLDHOLD
HOLD     
a\fd  the\f  [Z\fro]  to  e\fter  a\fd 
show the c\brre\ft setti\fg, defa\blt is  ON. 
    
4)  Press the  [Print] key to cha\fge the setti\fg for Hold, press  [Z\fro] to save, 
the\f  [kg/lb]  to select the \fext parameter. 
6.7\f SETTING
\fDATE\fAND\fTIME\fF7
F7F7
F7 
  
 D
DD
D-
--
-T
TT
T\f\f
1)  Switch  o\f  the  scale  the\f  press  the  [kg/lb] key  d\bri\fg  the  self-checki\fg 
test of the display. 
2)  The display will show the first f\b\fctio\f 
F1
F1F1
F1 
  
 EL
ELEL
EL.. 
3)  Press  the  [kg/lb] key  to  select 
F7
F7F7
F7D
DD
D-
--
-T
TT
T 
a\fd  the\f  [Z\fro]  to  e\fter  the  date 
setti\fg display. 
4)  The display will show the day, mo\fth a\fd year. 
5)  To  cha\fge  a\fy  setti\fg  press  the  [kg/lb]  key  to  i\fcreme\ft  the  flashi\fg 
digit a\fd either the  [Print] or [Cl\far] key to move the flashi\fg digit to the 
left or right. 
6)  Press  the  [Z\fro]  key  to  save  the  date  a\fd  e\fter  the  time  setti\fg 
parameter 
7)  To  cha\fge  the  time  press  the  [kg/lb]  key  to  i\fcreme\ft  the  flashi\fg  digit 
a\fd either the  [Print] or [Cl\far] key to move the flashi\fg digit to the left 
or right. 
8)  Press  [Z\fro]  to  save,  [cm/ft]  to  exit  the\f  [kg/lb]  to  select  the  \fext 
parameter. 
6.8  SET
\fUP 
  
 F8
F8F8
F8 
  
 SET
SETSET
SET 
  
 U\f
U\fU\f
U\f\f \f
Fo\br  performa\fce  parameters,  Filter,  A\bto  Zero,  Stability  a\fd  weight  tracki\fg 
are available to the USER. 
These  parameters  i\ffl\be\fce  the  speed  of  the  display  \bpdate  a\fd  have  bee\f 
factory  set,  the  defa\blt  setti\fgs  sho\bld  \formally  be  \bsed  to  optimise 
performa\fce.  
C  O  P Y  
						

							EN 
© Adam E\buipm\fnt Company 2012    14        700660229r\fvA-Jul12 
Available parameters a\fd setti\fgs are as below. 
PARAMETER DESCRIPTION DEFAULT VALUE 
FILT Filter setti\fgs of 1- 6 are available 
1 is the fastest filter, 3 is the slowest.    6 
ZERO A\btomatic Re-zero ra\fge 
Setti\fgs of 1 to 6 are available 2 
STA 
Stability symbol ra\fge  
Setti\fgs of 1 to 6 are available 
1 is the smallest stability ra\fge a\fd 6 is the largest.   6 
ZTR Weight Tracki\fg Ra\fge 
Setti\fgs of 1 to 6 are available 
4 
 
1)  Switch  o\f  the  scale  the\f  press  the  [kg/lb] key  d\bri\fg  the  self-checki\fg 
test of the display. 
2)  The display will show the first f\b\fctio\f
 
  
 F1
F1F1
F1 
  
 EL.
EL.EL.
EL.  
3)  Press  the  [kg/lb] key  to  select 
F
FF
F8
88
8 
  
 SET
SETSET
SET 
  
 U\f
U\fU\f
U\f 
a\fd  the\f  [Z\fro]  to  e\fter  a\fd 
show the first parameter . 
    
4)  Press  the  [Print]  key  to  cha\fge  the  setti\fg  a\fd  [Z\fro]  to  save  a\fd  move 
to the \fext parameter, press  [cm/ft] to exit.  
To ret\br\f to \formal operatio\f t\br\f the scale OFF a\fd the\f ON agai\f. 
6.9
\f\f TE\bHNI\bAL\fPARAMETERS\fF9
F9F9
F9 
  
 TECH
TECHTECH
TECH 
  
 
This  is  a  me\f\b  available  o\fly  to  q\balified  service  perso\f\fel  for  factory 
adj\bstme\fts. 
C  O  P Y  
						

							EN 
© Adam E\buipm\fnt Company 2012    15        700660229r\fvA-Jul12 
7.0  USER CALIBRATION 
1) Switch o\f the scale a\fd whilst the display co\b\fts dow\f press the  [Cl\far] 
key. 
2)  The  display  will  show  kg  or  lb,  press  [Print]  to  select  the  \b\fit  of  weight 
bei\fg \bsed for the calibratio\f a\fd the\f  [Z\fro] to co\ffirm. 
3)  The  display  will  show  CAL  XX  (XX  bei\fg  the  last  calibratio\f  weight  to  be  \bsed). 
4)  Press  the  [Print]  key  to  cha\fge  the  val\be  if  req\bired  a\fd  [Z\fro]  to 
co\ffirm. 
5)  The display will show the Zero A-D which sho\bld be stable. 
6)  Press  the  [Z\fro]  key  to  co\ffirm  the  Zero  poi\ft  a\fd  the  display  will  show 
LOd XX  (XX bei\fg the calibratio\f weight val\be to  be loaded o\fto the top 
pa\f). 
7)  Load the top pa\f with the calibratio\f weight a\fd press the  [Z\fro] k\fy.  
8)  The  display  will  show  “PASS”  for  a  s\bccessf\bl  calibratio\f  a\fd  ret\br\f  to  \formal weighi\fg displayi\fg the calibratio\f weight val\be correctly. 
9)  Remove the weight from the pa\f a\fd the scale will ret\br\f to Zero.  *A pri\ft o\bt with date a\fd time ca\f be iss\bed followi\fg every calibratio\f. 
If a\f error code was displayed whe\f calibrati\fg please see the error code 
table i\f sectio\f 9.1 
C  O  P Y  
						

							EN 
© Adam E\buipm\fnt Company 2012    16        700660229r\fvA-Jul12 
8.0  SERIAL INTERFACE SPECIFICATIONS 
The bala\fce comes eq\bipped with a\f RS-232 Serial I\fterface. 
The co\f\fector is a DE-9P female fitti\fg with the followi\fg co\f\fectio\fs. 
  Pi\f 2  TXD    Tra\fsmitted data 
  Pi\f 3  RXD  Received data 
  Pi\f 5  GND   Sig\fal gro\b\fd 
 
Printing Output:
   
The li\fes will i\fcl\bde a headi\fg for each detail the\f the val\be. A typical o\btp\bt 
whe\f weighi\fg is show\f below. 6 li\fes of data are pri\fted if all are e\fabled. 
All li\fes e\fd with a carriage ret\br\f  a\fd a li\fe feed , (0dH a\fd 0aH i\f 
ASCII). 
 
Input c\bmmand \f\brmat:   
The  bala\fce  ca\f  be  co\ftrolled  by  a  PC  with  the  followi\fg  comma\fds.  The 
comma\fds m\bst be se\ft i\f \bpper case letters, i.e. “T” \fot “t”.  
Z  Will Zero the scale, performs the same f\b\fctio\fs as pressi\fg the  [Z\fro] key.    
P 
  Will se\fd a Pri\ft comma\fd to a PC or Pri\fter. Performs the same f\b\fctio\fs as 
pressi\fg the 
[Print] key. 
C  Will  clear  the  last  recorded  readi\fg  from  the  display.  Performs  the  same 
f\b\fctio\fs as pressi\fg the  [Cl\far] key   
W  Will  cha\fge  the  Weight  meas\bri\fg  \b\fit  bei\fg  \bsed  betwee\f  kg,  lbs  a\fd  lbs 
a\fd o\b\fces. Performs the same f\b\fctio\fs as pressi\fg the  [kg/lb] key. 
H  Will  cha\fge  the  Height  meas\bri\fg  \b\fit  bei\fg  \bsed  betwee\f  cm,  i\fches  a\fd 
feet a\fd i\fches. Performs the same f\b\fctio\fs as pressi\fg the  [cm/ft] key. 
Doctor Id:     00001 
Patie\ft Id:    0000000123 
Weight:        80.00   kg 
Height:         183 cm 
BMI:             23.9 
D&T            30/07/2012    11.20 
C  O  P Y  
						

							EN 
© Adam E\buipm\fnt Company 2012    17        700660229r\fvA-Jul12 
9.0  TROUBLE SHOOTING 
9.1  ERROR\fMESSAGES\f
If  a\f  error  message  is  show\f,  repeat  the  step  that  ca\bsed  the  message.  If  the 
error message is still show\f the\f co\ftact yo\br dealer for s\bpport. 
 
DISPLAYED MESSAGE  DESCRIPTION 
Err  Meas\bred height is above 
210cm/82.5 i\fches 
UNDER Meas\bred height is below 
80cm/31.5 i\fches 
Err H Calibratio\f weight val\be 
\bsed too high 
Err L Calibratio\f weight val\be 
\bsed too low 
- - - - - - Weight o\f top pa\f exceeds 
300kg/660Lbs 
 
 
10.0  TECHNICAL SPECIFICATIONS 
 
Model   MUW 300L 
Maxim\bm Capacity 300kg/660Lbs 
Readability 0.05kg/0.1Lbs 
Repeatability (s.d.)  0.1kg/0.2Lbs 
Li\fearity ±  0.1kg/0.2Lbs 
U\fits of Height  Cm, i\fches, feet a\fd i\fches 
Height ra\fge  80cm – 210cm/ 31.5 - 82.5 i\fches 
U\fits of Weight  Kg, lb’s, lb’s a\fd o\b\fces 
Power S\bpply  12vDC 500mA or 800ma, or 
I\fter\fal rechargeable 6vDC battery 
Overall  Dime\fsio\fs 
w x d x h  0.38m x 0.6m x 2.3m 
15 x 23.6 x 90.2 i\fches 
\f
C  O  P Y  
						

							EN 
© Adam E\buipm\fnt Company 2012    18        700660229r\fvA-Jul12 
11.0 WARRANTY INFORMATION    
Adam Equipment offers Limited Warranty (Parts and Labour) for any components that fail due to defects in 
materials or workmanship. Warranty starts from the date of delivery. 
 
During  the  warranty  period,  should  any  repairs  be  necessary,  the  purchaser  must  inform  its  supplier  or 
Adam  Equipment  Company.  The  company  or  its  authorised  Technician  reserves  the  right  to  repair  or 
replace  the  components  at  any  of  its  workshops  at  no  additional  cost,  depending  on  the  severity  of  the 
problems. However, any freight involved in sending the faulty units or parts to the Service Centre should be 
borne by the purchaser. 
 
The  warranty  will  cease  to  operate  if  the  equipment  is  not  returned  in  the  original  packaging  and  with 
correct  documentation  for  a  claim  to  be  processed.  All  claims  are  at  the  sole  discretion  of  Adam 
Equipment. 
 
This  warranty  does  not  cover  equipment  where  defects  or  poor  performance  is  due  to  misuse,  accidental 
damage,  exposure  to  radioactive  or  corrosive  materials,  negligence,  faulty  installation,  unauthorised 
modifications or attempted repair, or failure to observe the requirements and recommendations as given in 
this User Manual. 
 
This product may include a rechargeable battery that is designed to be removed and replaced by the user. 
Adam  Equipment  warrants  that  it  will  provide  a  replacement  battery  if  the  battery  manifests  a  defect  in 
materials or workmanship during the initial period of use of the product in which the battery is installed. 
 
 As  with  all  batteries,  the  maximum capacity  of  any  battery  included in  the  product  will  decrease  with  time 
or use, and battery cycle life will vary depending on product model, configuration, features, use, and power 
management  settings.  A  decrease  in  maximum  battery  capacity  or  battery  cycle  life  is  not  a  defect  in 
materials or workmanship, and is not covered by this Limited Warranty. 
        
Repairs  carried  out  under  the  warranty  do  not  extend  the  warranty  period.  Components  removed  during 
warranty repairs become company property. 
The  statutory  rights  of  the  purchaser  are  not  affected  by  this  warranty.  The  terms  of  this  warranty  is 
governed  by  the  UK  law.  For  complete  details  on  Warranty  Information,  see  the  terms  and  conditions  of 
sale available on our web-site. 
        
C  O  P Y