HOW TO USE
CARE AND CLEANING
This appliance is for household use and may be plugged into any AC electrical outlet (ordinary household current).
Do not use any other electrical outlet.
OPERATING INSTRUCTIONS
1. Place the fan on a safe, flat surface where it cannot fall or be pulled by the cord.
2. Control the direction of the airflow by firmly holding the base in one hand and pushing the fan grille back to tilt
up or by pushing it forward to tilt down.
3. To make the fan oscillate, push down on the...
INSTRUCCIONES DE SEGURIDAD
Cuando estŽ usando aparatos elŽctricos, debe seguir siempre medidas b‡sicas de seguridad, incluyendo las siguientes:
1. Use el ventilador œnicamente para los fines descritos en este manual de instrucci—n.
2. Para proteger contra descargas elŽctricas, no sumerja la unidad, enchufe o cord—n en agua o roc’e con cualquier
l’quido.
3. Supervise cuidadosamente su manejo cuando este aparato est‡ siendo usado por o cerca de ni–os.
4. Desenchœfelo cuando no estŽ en uso, cuando mueva el...
HOW TO USE
CARE AND CLEANING
This appliance is for household use and may be plugged into a standard electrical outlet.
INSTALLATION INSTRUCTIONS
1. Unpack twin window fan carefully.
2. This unit is designed for use in double-hung type windows and vertical slider-type windows.
3. This fan is designed to be used (and recommended for use) with a screen in the window.
4. With the sliding portion of the window open fully, take an accurate inside measurement (left to right for double-hung type
windows and top...
HOW TO USE
CARE AND CLEANING
This appliance is for household use and may be plugged into a standard electrical outlet.
ASSEMBLY INSTRUCTIONS
1. Place fan base on firm, stable surface such as a table or countertop.
2. Mount the rear grille to the motor housing by matching the round holes in the rear grille (two at the top and
one at the bottom) to the round pins on the front of the motor housing. Push in firmly until the pins protrude
through the holes.
3. Secure the rear grille to the motor housing by...
How to Use
Care and Cleaning
This appliance is for household use and may be plugged into a standard electrical outlet.
IMPORTANT:
During the first few minutes of initial use, a slight odor may be noticeable. This is normal and will quickly disappear.
ASSEMBLY INSTRUCTIONS
1. Place fan base on firm, stable surface such as a table or countertop.
2. Mount the rear grille to the motor housing by matching the round holes in the rear grille (two at the top and one at the bottom)
to the round pins on the front...
HOW TO USE
CARE AND CLEANING
This appliance is for household use and may be plugged into a standard electrical standard.
ASSEMBLY INSTRUCTIONS
1. Place fan base on firm, stable surface such as a table or countertop.
2. Mount the rear grill to the motor housing by matching the round holes in the rear grille (one at the top, one at
the bottom) to the round pins on the front of the motor housing. Push in firmly until the pins protrude through
the holes.
3. Secure the rear grille to the motor housing by...
HOW TO USE
CARE AND CLEANING
This appliance is for household use and may be plugged into a standard electrical outlet.
OPERATING INSTRUCTIONS
1. Place the fan on a safe, flat surface where it cannot fall or be pulled by the cord.
2. Control the direction of the airflow by firmly holding the fan housing in one hand and loosening the tilt
ajustment knob with the other. Push the fan grille back to tilt up or push it forward to tilt down. When in
desired position, tighten the tilt adjustment knob.
3. To...
PANTONE 284PANTONE877 C
SPOT COLOR
SILVERWSF1200T
Date Code
P/N 178756-00 A/W 499144-00
ARTIST: JESUS
PROGRAM: QUARK 3.32 & 4.0
JOB #: 2002/8-30-107
JOB DISC: 12 STAND FAN
BOX SIZE: 14.4” X 19.57 X 5.55”
FACTORY: MIDEA
PROOF: MATCHPRINT
COLOR: 4 COLOR PROCESS
AS PER COLOR CHIPS
SPOT COLOR 877 SILVER
On Mac: 2002/8-30-107
Files To Print: WSF1200T.AW499144-00
Location: WINDMERE DISK
Fonts Used: SHANNON BOOK, TRADEGOTHIC,
OPTIC
fan oscillates from
any position...
HOW TO USE
COMO USAR
This appliance is for household use and may be plugged into a standard electrical outlet.
ASSEMBLY INSTRUCTIONS
1. Push the base end caps onto both ends of bar A and bar B.
2. Loosen and remove the four screws from bar A and bar B. Cross the 2 bars as shown in Fig. 1 and align the four holes
with those on the flange. Secure the flange to the bars with the four screws. Slide the base cap down over
the assembly.
CAUTION: Never remove the set knob, which holds the pipe stopper in...