Size: 19.685" x 17.5"
Licuadora CRUSH MASTER®
CRUSH MASTER® BLender
r12009/7-30-76S/e
350 W 120 V
CAT. NO. EHB500 TYPE 1 160 W 120 V AC ONLY 60Hz
60 Hz
Por favor lea este instructivo antes de usar el producto.
INSTRUCCIONES IMPORTANTES
DE SEGURIDAD
cuando se usan aparatos electricos, siempre se deben respetar las
siguientes medidas basicas de seguridad:
❍ Por favor lea todas las instrucciones.
❍ a fin de protegerse contra el riesgo de un choque electrico, no
sumerja el...
Size: 19.685" x 17.5"
Licuadora
DE 500 WATTS CON BASE METÁLICA
500-WATT DIE CAST METAL
BLender
2010/4-27-59
Por favor lea este instructivo antes de usar el producto.
INSTRUCCIONES IMPORTANTES
DE SEGURIDAD
cuando se usan aparatos electricos, siempre se deben respetar las
siguientes medidas basicas de seguridad:
❍ Por favor lea todas las instrucciones.
❍ a fin de protegerse contra el riesgo de un choque eléctrico,
no sumerja el cable, los enchufes ni el aparato en agua ni en
ningún otro...
blender
owners manual
SAVE THIS USE AND CARE BOOK
*
Please call 1-800-231-9786 with questions.
MGD250
TM
BLENDING SYSTEM WITH
ANALOG CONTROL
SISTEMA DE LICUADO CON
CONTROL AN\fLOGO
À COMMANDES ANALOGIQUES
u\be and care manual
manual de u\bo y cuida\Udo
guide d’utili\bation et d’entretien
BL6005
Please Read and Save this Use and Care Book.
IMPORTANT SAFEGUARDSWhen using electrical appliances, basic safety precautions should always be followed, including the following:• Read all instructions.• To protect against risk of electrical shock do not immerse cord, plugs or appliance in water or other liquid.• Close supervision is necessary when any appliance is used by or near children.• Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.• Avoid contacting...
Blender
Model IB10-12, IB53 - IB74 Series
English, see page 2
Save this use and care book
Licuadora
Model IB10-12, IB53 - IB74 Series
Español, consulte la página 5
Lease este instructivo antes de usar el producto
Mélangeur
Modèles des séries IB10, IB12, IB53 et IB74
Français, à la page 8
Conserver ce guide d’entretien et d’utilisation.
IB10-12, 53-74
*
PowerPro™
How To Use – English
1. Be sure the unit is “off” and plug the cord into a
standard electrical outlet.
2. Place the food to be blended into the Jar and the Lid
on the Jar before blending.
3. For models that have a Lid Cap, be sure that the Lid
Cap is in place. When crushing ice or hard foods, keep
one hand on the Lid.
4. Select the desired speed setting (A):
• BL500/BL600 Series:Some models have 10 speeds;
some have 12 speeds ranging from chop, crumb, and
stir to purée, liquefy, and grate. Choose the...
Size: 21.75" x 17"
How to Use
This product is for household use only.
Blender Jar Assembly
1. Before first use, wash all parts except the unit base.
The jar, base assembly, gasket and collar are already
assembled into the jar base. Disassemble to wash.
Once all pieces have been cleaned, reassemble.
Place the blade assembly in the
collar and place the gasket over
the blade assembly. Holding the
jar right-side up, thread the collar
on the bottom of the jar and turn it
counterclockwise until tight...
Size: 21.75" x 17"
How to Use
This product is for household use only.
Blender Jar Assembly
1. Before first use, wash all parts except the unit base.
The jar, base assembly, gasket and collar are already
assembled into the jar base. Disassemble to wash.
Once all pieces have been cleaned, reassemble.
Place the blade assembly in the
collar and place the gasket over
the blade assembly. Holding the
jar right-side up, thread the collar
on the bottom of the jar and turn it
counterclockwise until tight...
Size: 21.75" x 17"
How to Use
This product is for household use only.
Blender Jar Assembly
1. Before first use, wash all parts except the unit base.
The jar, base assembly, gasket and collar are already
assembled into the jar base. Disassemble to wash.
Once all pieces have been cleaned, reassemble.
Place the blade assembly in the
collar and place the gasket over
the blade assembly. Holding the
jar right-side up, thread the collar
on the bottom of the jar and turn it
counterclockwise until tight...
Size: 21.75" x 17"
How to Use
This product is for household use only.
Blender Jar Assembly
1. Before first use, wash all parts except the unit base.
The jar, base assembly, gasket and collar are already
assembled into the jar base. Disassemble to wash.
Once all pieces have been cleaned, reassemble.
Place the blade assembly in the
collar and place the gasket over
the blade assembly. Holding the
jar right-side up, thread the collar
on the bottom of the jar and turn it
counterclockwise until tight...
Size: 21.75" x 17"
How to Use
This product is for household use only.
Blender Jar Assembly
1. Before first use, wash all parts except the unit base.
The jar, base assembly, gasket and collar are already
assembled into the jar base. Disassemble to wash.
Once all pieces have been cleaned, reassemble.
Place the blade assembly in the
collar and place the gasket over
the blade assembly. Holding the
jar right-side up, thread the collar
on the bottom of the jar and turn it
counterclockwise until tight...
Size: 21.75" x 17"
How to Use
This product is for household use only.
Blender Jar Assembly
1. Before first use, wash all parts except the unit base.
The jar, base assembly, gasket and collar are already
assembled into the jar base. Disassemble to wash.
Once all pieces have been cleaned, reassemble.
Place the blade assembly in the
collar and place the gasket over
the blade assembly. Holding the
jar right-side up, thread the collar
on the bottom of the jar and turn it
counterclockwise until tight...
GETTING STARTED WITH YOUR
POUR COMMENCER AVEC
TM
\f
\b
