Canon printer PIXMA MX490 User Manual
Have a look at the manual Canon printer PIXMA MX490 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1403Cause The FINE cartridge cannot be recognized. Action Replace the FINE cartridge. If the error is not resolved, the FINE cartridge may be damaged. Contact the service center. 931
1485Cause Appropriate ink cartridge is not installed. Action Printing cannot be executed because the ink cartridge is not compatible with this machine. Install the appropriate ink cartridge. If you want to cancel printing, press the machine's Stop button. 932
1682Cause The FINE cartridge cannot be recognized. Action Replace the FINE cartridge. If the error is not resolved, the FINE cartridge may be damaged. Contact the service center. 933
1684Cause The ink cartridge cannot be recognized. Action Printing cannot be executed because the ink cartridge may not be installed properly or may not be compatible with this machine. Install the appropriate ink cartridge. If you want to cancel printing, press the machine's Stop button. 934
1686Cause The ink may have run out. Action The function for detecting the remaining ink level will be disabled since the ink level cannot be correctly detected. If you want to continue printing without this function, press the machine's Stop button for at least 5 seconds. Canon recommends to use new genuine Canon cartridges in order to obtain optimum qualities. Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition. Note • If the function for detecting the remaining ink level is disabled, is displayed on the LCD. • Since the information contained in the fax may be lost if it is printed in this condition, the received fax will not be printed and will be stored in the machine's memory until the ink cartridge is replaced. You must manually print out faxes that were stored in the memory. You can change the setting so that the received fax is forcibly printed out instead of being stored in the memory, but all or part of the fax information may not be printed because of the ink out condition. 935
1688Cause The ink has run out. Action Replace the ink cartridge and close the paper output cover. If printing is in progress and you want to continue printing, press the machine's Stop button for at least 5 seconds with the ink cartridge installed. Then printing can continue under the ink out condition. The function for detecting the remaining ink level will be disabled. Replace the empty ink cartridge immediately after the printing. The resulting print quality is not satisfactory, if printing is continued under the ink out condition. Note • If the function for detecting the remaining ink level is disabled, is displayed on the LCD. • Since the information contained in the fax may be lost if it is printed in this condition, the received fax will not be printed and will be stored in the machine's memory until the ink cartridge is replaced. You must manually print out faxes that were stored in the memory. You can change the setting so that the received fax is forcibly printed out instead of being stored in the memory, but all or part of the fax information may not be printed because of the ink out condition. 936
168ACauseThe FINE cartridge is not installed properly, or the FINE cartridge not compatible with this machine isinstalled. Action Open the paper output cover, then remove the FINE cartridges. Make sure that the FINE cartridge compatible with the machine is installed. Then install the FINE cartridges again. Push up the FINE cartridge until it clicks into place. When the FINE cartridge is installed properly, you hear an electric sound once. After installing, close the paper output cover. 937
1702Cause The ink absorber is almost full. Action Press the machine's OK button to continue printing. Contact the service center. 938
1703Cause The ink absorber is almost full. Action Press the machine's OK button to continue printing. Contact the service center. 939
1704Cause The ink absorber is almost full. Action Press the machine's OK button to continue printing. Contact the service center. 940