Home > Canon > Printer > Canon printer PIXMA MX490 User Manual

Canon printer PIXMA MX490 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA MX490 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 1004
    							Telephone Problems
    Cannot Dial
    Telephone Disconnects During a Call
    881 
    						
    							Cannot Dial
    Check1 Is the telephone line cable connected correctly?
    Check that the telephone line cable is connected correctly.
    Basic Connection
    Check2  Is the telephone line type of the machine or the external device set correctly?
    Check the telephone line type setting and change it as necessary.
    Setting the Telephone Line Type
    882 
    						
    							Telephone Disconnects During a Call
    Check Is the telephone line cable or the telephone (or a peripheral device such as an
    external telephone, an answering machine, or a computer modem) connected correctly?
    Check that the telephone line cable and the telephone (or a peripheral device such as an external telephone, an answering machine, or a computer modem) are connected correctly.
    Connecting the Telephone Line
    883 
    						
    							Problems with the Machine
    The Machine Cannot Be Powered On
    The Machine Turns Off Unintentionally
    Cannot Connect to Computer with a USB Cable Properly
    Cannot Communicate with the Machine with USB Connection
    LCD Cannot Be Seen At All
    An Unintended Language Is Displayed on the LCD
    FINE Cartridge Holder Does Not Move to the Position for Replacing
    Printer Status Monitor Is Not Displayed
    884 
    						
    							The Machine Cannot Be Powered On
    Check1 Press the  ON button.
    Check2
     Make sure that the power plug is securely plugged into the power cord
    connector of the machine, then turn it back on.
    Check3  Unplug the machine from the power supply, then plug the machine back in and
    turn the machine back on after leaving it for at least 3 minutes.
    If the problem is not resolved, contact the service center.
    885 
    						
    							The Machine Turns Off Unintentionally
    Check Disable the setting to turn the unit off automatically.
    The machine turns off automatically according to the elapsed time you specified if the setting to turn the unit off automatically is enabled.
    If you do not want the machine to turn off automatically, open the printer driver setup window and in  Auto Power
    under the  Maintenance  sheet, select  Disable for Auto Power Off .
    Note
    •
    You can also enable the machine to turn off automatically from the operation panel of the machine or
    ScanGear (scanner driver).
    •
    From the operation panel of the machine:
    Auto power off
    •
    From ScanGear (scanner driver):
    Scanner Tab
    886 
    						
    							Cannot Connect to Computer with a USB Cable Properly
    Printing or Scanning Speed Is Slow/Hi-Speed USB Connection Does
    Not Work/"This device can perform faster" Message Is Displayed
    If your system environment is not fully compatible with Hi-Speed USB, the machine will operate at a lower
    speed provided under USB 1.1. In this case, the machine operates properly but printing or scanning
    speed may slow down due to communication speed.
    Check  Check the following to make sure that your system environment supports Hi-
    Speed USB connection.
    •
    Does the USB port on your computer support Hi-Speed USB connection?
    •
    Does the USB cable or the USB hub support Hi-Speed USB connection?
    Be sure to use a certified Hi-Speed USB cable. We recommend that the cable is no longer than around
    10 feet / 3 meters.
    •
    Does the operating system of your computer support Hi-Speed USB connection?
    Obtain and install the latest update for your computer.
    •
    Does the Hi-Speed USB driver operate properly?
    Obtain the latest version of the Hi-Speed USB driver compatible with your hardware and reinstall it on
    your computer.
    Important
    •
    For details on Hi-Speed USB of your system environment, contact the manufacturer of your computer,
    USB cable, or USB hub.
    887 
    						
    							Cannot Communicate with the Machine with USB Connection
    Check1 Make sure that the machine is turned on.
    Check2 Make sure that the USB cable is connected properly.
    See 
    Connecting the Machine to the Computer Using a USB Cable  to connect the USB cable properly.
    Check3
     Do not start up IJ Network Tool while printing.
    Check4 Do not print while IJ Network Tool is running.
    Check5 Make sure that  Enable bidirectional support  is selected in the Ports sheet of
    the properties dialog box of the printer driver.
    How to Open the Printer Driver Setup Window
    888 
    						
    							LCD Cannot Be Seen At All
    •
    If the POWER lamp is off:
    The machine is not powered on. Connect the power cord and press the  ON button.
    •
    If the POWER lamp is lit:
    The LCD may be in the screen-saver mode. Press a button other than the  ON button on the operation
    panel.
    889 
    						
    							An Unintended Language Is Displayed on the LCD
    Select the language you want to be displayed according to the following procedure.
    1.
    Press the Setup button, then wait for about 5 seconds.
    2.
    Press the  button twice, then press the  OK button.
    3.
    Press the  button twice, then press the  OK button.
    4.
    Press the  button repeatedly to display the rightmost menu.
    5.
    Press the  button 3 times, then press the  OK button.
    6.
    Use the  button to select the language for the LCD, then press the  OK button.
    The desired language is displayed on the LCD.
    7.
    Press the  Stop button.
    890 
    						
    All Canon manuals Comments (1)

    Related Manuals for Canon printer PIXMA MX490 User Manual