ZyXEL Router Prestige 334 User Manual

							Prestige 334 User’s Guide
Chapter 9 UPnP110
9.4.2  Installing UPnP in Windows XP
Follow the steps below to install UPnP in Windows XP.
1Click Sta rt and Control Panel. 
2Double-click Network Connections.
3In the Network Connections 
window, click Advanced in the main 
menu and select Optional 
Networking Components ….
4The Windows Optional Networking 
Components Wizard window 
displays. 
5Select Networking Service in the 
Components selection box and click 
Details. 
6In the Networking Services window, 
select the Universal Plug and Play 
check box. 
7Click OK to go back to the Windows 
Optional Networking Component 
Wizard window and click Next.  
						

							Prestige 334 User’s Guide
111Chapter 9 UPnP
9.5  Using UPnP in Windows XP Example
This section shows you how to use the UPnP feature in Windows XP. You must already have 
UPnP installed in Windows XP and UPnP activated on the ZyXEL device.
Make sure the computer is connected to a LAN port of the ZyXEL device. Turn on your 
computer and the ZyXEL device.  
						

							Prestige 334 User’s Guide
Chapter 9 UPnP112
9.5.1  Auto-discover Your UPnP-enabled Network Device
1Click Sta rt and Control Panel. Double-click 
Network Connections. An icon displays 
under Internet Gateway.
2Right-click the icon and select Properties. 
3In the Internet Connection Properties 
window, click Settings to see the port 
mappings that were automatically created. 4You may edit or delete the port 
mappings or click Add to 
manually add port mappings. 
Note: When the UPnP-enabled device is disconnected from your computer, all port 
mappings will be deleted automatically. 
						

							Prestige 334 User’s Guide
113Chapter 9 UPnP
9.5.2  Web Configurator Easy Access
With UPnP, you can access the web-based configurator on the ZyXEL device without finding 
out the IP address of the ZyXEL device first. This is helpful if you do not know the IP address 
of the ZyXEL device.
Follow the steps below to access the web configurator.
5Select the Show icon in notification area 
when connected check box and click OK. An 
icon displays in the system tray
6Double-click the icon to display your current 
Internet connection status. 
						

							Prestige 334 User’s Guide
Chapter 9 UPnP114
9.5.3  Web Configurator Easy Access
With UPnP, you can access the web-based configurator on the ZyXEL device without finding 
out the IP address of the ZyXEL device first. This is helpful if you do not know the IP address 
of the ZyXEL device.
1Click Sta rt and then Control Panel. 
2Double-click Network Connections. 
3Select My Network Places under 
Other Places. 
4An icon with the description for each 
UPnP-enabled device displays under 
Local Network. 
5Right-click the icon for your ZyXEL 
device and select Invoke. The web 
configurator login screen displays. 
6Right-click the icon for your ZyXEL 
device and select Properties. A 
properties window displays with 
basic information about the ZyXEL 
device.  
						

							Prestige 334 User’s Guide
115Chapter 9 UPnP
Follow the steps below to access the web configurator.
1Click Start and then Control Panel.
2Double-click Network Connections.
3 Select My Network Places under 
Other Places. 
4An icon with the description for each 
UPnP-enabled device displays under 
Local Network. 
5Right-click the icon for your ZyXEL 
device and select Invoke. The web 
configurator login screen displays.
6Right-click the icon for your ZyXEL 
device and select Properties. A 
properties window displays with 
basic information about the ZyXEL 
device. 
						

							Prestige 334 User’s Guide
Chapter 10 Trend Micro Security Services 116
CHAPTER10
Trend Micro Security Services
This chapter contains information about configuring Trend Micro Security Services settings, 
virus protection, parental controls and customization.
10.1  Trend Micro Security Service Overview
Trend Micro Security Services (TMSS) are a range of services including virus protection and 
parental controls designed to address the security needs of computers on a network that access 
the Internet via broadband routers. 
Computers that are connected to the Internet via broadband connection increase the risk of 
attacks such as viruses, hackers, spyware and spam. 
This screen allows you to enable TMSS, configure how often the TMSS Web page displays 
and select the computers in your network that you want this service to apply.
10.2  Configuring Service Settings
Click TMSS under ADVANCED to open the Service Settings screen, where you can decide 
which computers in the network you can apply TMSS. 
Note: When you enable TMSS on your Prestige, it is freely available 
for an initial home trial period. To continue to use TMSS after the 
initial home trial you must extend this period. See the Tre n d  M i c ro 
website for information on how to do this. 
						

							Prestige 334 User’s Guide
117 Chapter 10 Trend Micro Security Services
Figure 39   Service Settings
The following table describes the labels in this screen.
Table 31   Service Settings
LABELDESCRIPTION
Enable Trend Micro 
Security ServicesSelect the checkbox to enable Trend Micro Security Services on your 
Prestige.
Note: Make sure that you have not restricted access to 
ActiveX, Cookies or Web Proxy features in the Advanced  
Filter screen. If you restrict Web access to these features you 
will not be able to use TMSS.
Security Services Display 
IntervalYou can control the times at which the security services page 
automatically appears.
Automatically display 
TMSS Web page every:Select a time from the drop-down list box. 
The choices are:
•1 day
• 3 days 
• 1 week
• 2 weeks
•1 month  
						

							Prestige 334 User’s Guide
Chapter 10 Trend Micro Security Services 118
10.3  Virus Protection
This screen allows you to check the computers in the network for Trend Micro Internet 
Security. You can also select antivirus component update time intervals and monitor the virus 
protection status on each client computer in your network.
Trend Micro Antivirus software can be downloaded to each computer in your network from 
the Tre n d  M i c ro website.
10.4  Configuring Virus Protection
Select the Virus Protection tab in TMSS under ADVANCED to display the following screen.
Exception ListYou can specify on which computer(s) the TMSS Web page will not be 
displayed. The default setting is to have all computers display the Web 
page.
Computer(s) that will 
display Trend Micro 
Home Network Security 
Services:This box displays the IP addresses of the computers that are enabled with 
TMSS on your network. The client issues an http request through the 
Prestige to have the IP address of their computer displayed in this box. 
Note: A maximum of 10 client IP addresses are displayed in 
this box.
Computer(s) to exclude:This box displays all of the chosen IP address(es) of the computer(s) with 
TMSS disabled on your network.
Click Add>> to copy a computers IP address from the list of Computer(s) 
that will display Trend Micro Home Network Security Services to the 
Computer(s) to exclude list.
Click 
						

							Prestige 334 User’s Guide
119 Chapter 10 Trend Micro Security Services
Figure 40   Virus Protection
 The following table describes the labels in this screen.
Table 32   Virus Protection
LABELDESCRIPTION
Check for Trend Micro Internet Security
Automatically check for 
update componentsSelect the checkbox to have the Prestige download the latest scan engine 
version and virus pattern version from the Trend Micro website.
Check for update 
components everyChoose when to automatically check the Trend Micro Active Update server 
for updated components. Options include:
• 10 minutes 
• 20 minutes 
• 30 minutes 
• 1 hours 
• 2 hours 
• 3 hours 
Scan engine versionThis field displays the version number of the virus scan program.
Virus pattern versionThis field displays the version number of the pattern file.
Client Antivirus Protection 
StatusThis table provides information of all the computers on the network 
including whether the client has installed the antivirus software and the 
status of the update components.
#This field displays the index number of a client computer on the network.
Note: A maximum of 10 client IP addresses are displayed in 
this box.
IP AddressThis field displays the IP address of a client computer.