Yamaha Promix 1 Manual

Control Change83
ProMix 01 User’s Guide
1. Press [MIDI].
The MIDI menu appears.
2. Select CONTROL CHANGE 
ASSIGN and press [ENTER].
The CONTROL CHANGE 
ASSIGN LCD function 
appears.
3. With the cursor in the 
No./NAME column, use the 
PARAMETER wheel to scroll 
through the ProMix 01 
parameters.
4. Use the cursor buttons to 
select the Bank and Control 
Change (No.) columns and 
the PARAMETER wheel to 
set them.
5. When the Bank or Control 
Change (No.) column is 
selected, the [¹] [  ] cursor 
buttons...

  84  Chapter 9: MIDI 
ProMix 01 User’s Guide  Register
   — all Control Changes use the Tx Ch MIDI Channel, and 
Control Change #98 (Non-Registered Parameter LSB) is used to spec-
ify banks.
To reset the Control Change assignments to their initial values, select 
RESET and press [ENTER]. An “Are your sure” message appears. 
Select YES to reset, NO to cancel, then press [ENTER] again. 
If several parameters are assigned to the same Control Change in the 
same bank, the lowest numbered parameter is...

  Bulk Dump/Request 85 
ProMix 01 User’s Guide  1. Press [MIDI].
  The MIDI menu appears.
  2. Select BULK DUMP 
REQUEST and press 
[ENTER].
  The BULK DUMP REQUEST 
LCD function appears.
  3. Select MODE and press 
[ENTER] or use the PARAM-
ETER wheel to select BULK 
DUMP or BULK REQUEST.
4. Use the cursor buttons to 
select a data type. Use the 
PARAMETER wheel to select 
mix scenes.
5. Press [ENTER] to execute 
the dump or request. 
  A message appears showing 
dump or request status.
  6. To exit...

  86  Chapter 9: MIDI 
ProMix 01 User’s Guide  1. Press [MIDI].
  The MIDI menu appears.
  2. Select LOCAL ON/OFF and 
press [ENTER].
  The LOCAL ON/OFF LCD func-
tion appears.
  3. Press [ENTER] or use the 
PARAMETER wheel to turn 
LOCAL ON/OFF ON and 
OFF.
4. Use the cursor buttons to 
select the LOCAL ON/OFF 
parameter and the [ENTER] 
button to set it.
5. To exit this function and 
return to the MIDI menu, 
select EXIT and press 
[ENTER], or just press 
[MIDI].
  The MIDI menu reappears.  ! 
Make...

Memory Control Change Out87
ProMix 01 User’s Guide
1. Press [MIDI].
The MIDI menu appears.
2. Select MEMORY CONTROL 
CHANGE OUT and press 
[ENTER].
The MEMORY CONTROL 
CHANGE OUT LCD function 
appears.
3. Use the cursor buttons to 
select parameters and the 
PARAMETER wheel and 
[ENTER] button to set them.
4. Select OUTPUT:EXECUTE 
and press [ENTER].
The selected data is output 
and the message “EXECUT-
ING” appears. The message 
changes to “....DONE” when 
finished.
5. To exit this function and 
return...

88Chapter 9: MIDI
ProMix 01 User’s Guide 

Other Functions89
ProMix 01 User’s Guide
10
Other Functions
In this chapter... 
Using the Oscillator  . . . . . . . . . . . . . . . . . . . . . . . . . . .   90
Checking the Battery  . . . . . . . . . . . . . . . . . . . . . . . . . .   91
ProMix 01 Initialization   . . . . . . . . . . . . . . . . . . . . . . .   92
Fader Calibration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   92 

90Chapter 10: Other Functions
ProMix 01 User’s Guide
1. Press [UTILITY].
The UTILITY menu appears.
2. Select OSCILLATOR and 
press [ENTER].
The OSCILLATOR LCD func-
tion appears. 
3. Assign the oscillator.
4. Turn the OSC ON.
5. Set the frequency (FREQ).
6. Set the level.
7. To exit this function and 
return to the UTILITY menu, 
select EXIT and press 
[ENTER], or just press [UTIL-
ITY].
The UTILITY menu reappears.
Using the Oscillator
ProMix 01 features a useful sine wave oscillator that can be assigned...

Checking the Battery91
ProMix 01 User’s Guide
1. Press [UTILITY].
The UTILITY menu appears.
2. Select BATTERY CHECK and 
press [ENTER].
The BATTERY CHECK LCD 
function appears. 
3. To exit this function and 
return to the UTILITY menu, 
select EXIT and press 
[ENTER], or just press [UTIL-
ITY].
The UTILITY menu reappears.
Checking the Battery
ProMix 01 uses a long-life battery to backup its RAM memory. The 
battery should last for up to five years, and you can check its condition 
using the BATTERY CHECK...

92Chapter 10: Other Functions
ProMix 01 User’s Guide
1. Power OFF ProMix 01.
2. Press and hold down 
[STORE] and [INC+].
3. Power ON ProMix 01.
The message “Initializing 
Memory” appears.
4. When the “Initializing 
Memory” message disap-
pears, release the buttons.
When the faders return to 
their minimum positions, ini-
tialization is complete.
ProMix 01 Initialization
This function allows you to reset all ProMix 01 mix settings, mix 
scenes, user effects programs, user EQ programs, and user dynamics...