Yamaha Ls 9 Service Manual

201
LS9-16/LS9-32

USB: Data Overrun! USB: Rx Buffer Full! USB: Tx Buffer Full! Word Clock Error!  Recorder Stopped!Wrong Audio File Format!Wrong Password!Wrong Word Clock! You Cannot Create User Key.CPUP:Rx Buffer Full!Unknown Format!!CheckSum Error!!===== File Read Error!! ==========  CheckSum Error!! =====
Invalid signals are being input from the USB connector input port.Too  much  data  is  being  received  at  the  USB  connector  input port.Too  much  data  is  being  transmitted  from  the  USB...

LS9-16/LS9-32
202

 ワーニング／エラーメッセージ
Ý¿·”´
“A
xxx Parameters Copied.xxx Parameters Initialized.xxx Parameters Pasted.xxx Parameters Swapped with Copy Buffer.Assignment is Restricted to Max.8 Sources!Cannot Recall to Different Parameter Type!Cannot Recall!Cannot Select This Channel.Cannot Store!Cannot Undo!Couldn’t Access File.Couldn’t Write File.Current User Changed. [xxx]Directory Not Empty!EFFECT CUE: Turned Off.External HA Connection Conflict!File Access is Busy!File Already Exists!File Error...

203
LS9-16/LS9-32

Ý¿·”´
“A
File Protected!Help File Not Found!Illegal Address!Illegal MAC Address! Cannot Use Network.Illegal Storage Format!KEY IN CUE: Turned Off.Loading Aborted.Low Battery!Maximum Number of Audio Files Exceeded!Memory Error! All Memories were Initialized.MIDI: Data Framing Error!MIDI: Data Overrun!MIDI: Rx Buffer Full!
64# 

LS9-16/LS9-32
204

Ý¿·”´
“A
MIDI: Tx Buffer Full!No Controllable Knob.No Corresponding Help Items.No Response from External HA.Page Bookmarked.Password Changed.Power Supply Fan hasMalfunctioned!Processing Aborted.Saving Aborted.SCENE #xxx is Empty!SCENE #xxx is Protected! SCENE #xxx is Read Only! SLOT{x}: Data Framing Error! SLOT{x}: Data Overrun! SLOT{x}: Rx Buffer Full! SLOT{x}: Tx Buffer Full! 
.*%* 	Z

205
LS9-16/LS9-32

Ý¿·”´
“A
Storage Full! Storage Not Found! Storage Not Ready!Sync Error! [xxx]Tap Operation Ignored.This Operation is Not Allowed. Too Large File! Loading Failed.Too Many Bands Used! Cannot Compare.Too Many EQ Bands Used! Cannot Paste!Total Slot Power Capability Exceeded!Unsupported File Format! USB Currently Active for Recorder function!USB Currently Active for SAVE or LOAD!USB Memory Full ! Recorder Stopped.USB Memory Unmounted ! Recorder Stopped.USB over current Error!...

LS9-16/LS9-32
206

Ý¿·”´
“A
USB: Data Overrun! USB: Rx Buffer Full! USB: Tx Buffer Full! Word Clock Error!  Recorder Stopped!Wrong Audio File Format!Wrong Password!Wrong Word Clock! You Cannot Create User Key.CPUP:Rx Buffer Full!Unknown Format!!CheckSum Error!!===== File Read Error!! ==========  CheckSum Error!! =====
64# z

207
LS9-16/LS9-32

 MIDI IMPLEMENTATION CHART
 YAMAHA    [ Digital Mixing Console ]                      Date :8-Aug-2\
006
           Model  LS9-16/32 MIDI Implementation Chart      Version : 1.0\
  Transmitted  Recognized Remarks
Function...
Basic  Default  1 - 16    1 - 16    Memorized
Channel  Changed 1 - 16   1 - 16
Defaultx  1, 3   Memorized
Mode  Messages  x   x
Altered  **************   x
Note   x  0 - 127
Number  :  True voice  **************   x
Velocity  Note ON xo 9nH, v=1-127   Effect...

LS9-16/LS9-32
208

This section explains the format of the data that the LS9 is able to understand, send, and receive.
1CHANNEL MESSAGE
1.1NOTE OFF(8n)
ReceptionThese messages are echoedto MIDI OUT if [OTHER COMMAND ECHO] is ON.They arereceived if [Rx CH] matches, and used tocontrol effects.
1.2NOTE ON(9n)
ReceptionThese messages are echoedto MIDI OUT if [OTHER COMMAND ECHO] is ON.They arereceived if [Rx CH] matches, and used tocontrol effects.
1.3CONTROL CHANGE(Bn)Twotypes of CONTROL CHANGE can be...

209
LS9-16/LS9-32

1.4PROGRAM CHANGE(Cn)
ReceptionIf [PROGRAM CHANGE ECHO] is ON, bank select messages will also be echoed from MIDI OUT.IfSINGLECHisselected,thesemessagesarereceivedif[PROGRAMCHANGERx]isONandthe[RxCH]matches.Howeverif[OMNI]isON,thesemessagesarereceivedregardless of the channel.When these messages arereceived, scenememory and effect library arerecalled accordingto the settings of the [PROGRAM CHANGE EVENT LIST].
TransmissionIf[PROGRAMCHANGETx]isON,thesemessagesaretransmittedaccordingto...

LS9-16/LS9-32
210

3.2BULK DUMP
The LS9 uses the following data types for a bulk dump.
*1)0–300 Scene Number (0 Request Only),*2)1–199 Input EQ Library Number (1–40 Request Only)*3)1–199 Output EQ Library Number (1–3 Request Only)*4)1–199 Dynamics Library Number (1–41 Request Only)*5)0–199 GEQ Library Number (0 Request Only)*6)1–199 Effect Library Number (1–57 Request Only)*7)512–575 Input  1–64,*8)576–583 STIN  1L–4R,*9)768–783  MIX 1–16,*10)1024–1031 MATRIX 1-8 (LS9-32 only),*11)1280–1282 STEREO L–C,...