Yamaha Ls 9 Service Manual
Here you can view all the pages of manual Yamaha Ls 9 Service Manual. The Yamaha manuals for Music Production System are available online for free. You can easily download all the documents as PDF.
Page 181
![Page 181
181 LS9-16/LS9-32
INITIALIZING THE LS9’s INTERNAL MEMORY
If an error occurs in the LS9’s internal memory, or if you have forgotten the password, you can use the following procedure to
initialize the internal memory.
CAUTION
eration only if you are very sure you want to do this.
While holding down the [SCENE MEMORY]
key of the DISPLAY ACCESS section, turn
on the power switch.
After the opening screen, the following startup menu
screen will appear.
1
According to the desired type of initializa-
tion,...](http://img.usermanuals.tech/thumb/83/98063/w300_d_1507181543-yamaha-ls-9-service-manual_d-180.png "Page 181
181 LS9-16/LS9-32
INITIALIZING THE LS9’s INTERNAL MEMORY
If an error occurs in the LS9’s internal memory, or if you have forgotten the password, you can use the following procedure to
initialize the internal memory.
CAUTION
eration only if you are very sure you want to do this.
While holding down the [SCENE MEMORY]
key of the DISPLAY ACCESS section, turn
on the power switch.
After the opening screen, the following startup menu
screen will appear.
1
According to the desired type of initializa-
tion,...")
181 LS9-16/LS9-32 INITIALIZING THE LS9’s INTERNAL MEMORY If an error occurs in the LS9’s internal memory, or if you have forgotten the password, you can use the following procedure to initialize the internal memory. CAUTION eration only if you are very sure you want to do this. While holding down the [SCENE MEMORY] key of the DISPLAY ACCESS section, turn on the power switch. After the opening screen, the following startup menu screen will appear. 1 According to the desired type of initializa- tion,...
Page 182
LS9-16/LS9-32 182 -4 w
Page 183
![Page 183
183 LS9-16/LS9-32
CALIBRATION FUNCTION
Depending on the environment in which you use the console, discrepancies may occur in the motion of the motor faders. You
can use the Calibration function to correct these discrepancies.
While holding down the [SCENE MEMORY]
key of the DISPLAY ACCESS section, turn
on the power switch.
After the opening screen, the following startup menu
screen will appear.
1
Move the cursor to the FADER CALIBRA-
TION button and press the [ENTER] key.
The FADER CALIBRATION MODE...](http://img.usermanuals.tech/thumb/83/98063/w300_d_1507181543-yamaha-ls-9-service-manual_d-182.png "Page 183
183 LS9-16/LS9-32
CALIBRATION FUNCTION
Depending on the environment in which you use the console, discrepancies may occur in the motion of the motor faders. You
can use the Calibration function to correct these discrepancies.
While holding down the [SCENE MEMORY]
key of the DISPLAY ACCESS section, turn
on the power switch.
After the opening screen, the following startup menu
screen will appear.
1
Move the cursor to the FADER CALIBRA-
TION button and press the [ENTER] key.
The FADER CALIBRATION MODE...")
183 LS9-16/LS9-32 CALIBRATION FUNCTION Depending on the environment in which you use the console, discrepancies may occur in the motion of the motor faders. You can use the Calibration function to correct these discrepancies. While holding down the [SCENE MEMORY] key of the DISPLAY ACCESS section, turn on the power switch. After the opening screen, the following startup menu screen will appear. 1 Move the cursor to the FADER CALIBRA- TION button and press the [ENTER] key. The FADER CALIBRATION MODE...
Page 184
![Page 184
LS9-16/LS9-32
184
If necessary, you can make fi ne adjustments to the input/output gain.
While holding down the [SCENE MEMORY]
key of the DISPLAY ACCESS section, turn
on the power switch.
After the opening screen, the following startup menu
screen will appear.
1
q INPUT PORT TRIM button
w OUTPUT PORT TRIM button
e SLOT OUTPUT TRIM button
:
@
.
Adjusting the input/output gain
In the MODE SELECT eld, move the cursor
to one of the following buttons to select the
target you want to adjust, and press...](http://img.usermanuals.tech/thumb/83/98063/w300_d_1507181543-yamaha-ls-9-service-manual_d-183.png "Page 184
LS9-16/LS9-32
184
If necessary, you can make fi ne adjustments to the input/output gain.
While holding down the [SCENE MEMORY]
key of the DISPLAY ACCESS section, turn
on the power switch.
After the opening screen, the following startup menu
screen will appear.
1
q INPUT PORT TRIM button
w OUTPUT PORT TRIM button
e SLOT OUTPUT TRIM button
:
@
.
Adjusting the input/output gain
In the MODE SELECT eld, move the cursor
to one of the following buttons to select the
target you want to adjust, and press...")
LS9-16/LS9-32 184 If necessary, you can make fi ne adjustments to the input/output gain. While holding down the [SCENE MEMORY] key of the DISPLAY ACCESS section, turn on the power switch. After the opening screen, the following startup menu screen will appear. 1 q INPUT PORT TRIM button w OUTPUT PORT TRIM button e SLOT OUTPUT TRIM button : @ . Adjusting the input/output gain In the MODE SELECT eld, move the cursor to one of the following buttons to select the target you want to adjust, and press...
Page 185
![Page 185
185 LS9-16/LS9-32
LCD screen can be adjusted as needed.
While holding down the [SCENE MEMORY]
key of the DISPLAY ACCESS section, turn
on the power switch.
After the opening screen, the following startup menu
screen will appear.
1
LCD CONTRAST CALIBRATION
Press the RACK [1-4] key and [5-8] key in
the DISPLAY ACCESS section on the con-
trol panel simultaneously.
The following screen for “LCD CONTRAST
CALIBRATION” will appear.
2
Adjust the screen with the parameter dial un-
til both the numbers “1”...](http://img.usermanuals.tech/thumb/83/98063/w300_d_1507181543-yamaha-ls-9-service-manual_d-184.png "Page 185
185 LS9-16/LS9-32
LCD screen can be adjusted as needed.
While holding down the [SCENE MEMORY]
key of the DISPLAY ACCESS section, turn
on the power switch.
After the opening screen, the following startup menu
screen will appear.
1
LCD CONTRAST CALIBRATION
Press the RACK [1-4] key and [5-8] key in
the DISPLAY ACCESS section on the con-
trol panel simultaneously.
The following screen for “LCD CONTRAST
CALIBRATION” will appear.
2
Adjust the screen with the parameter dial un-
til both the numbers “1”...")
185 LS9-16/LS9-32 LCD screen can be adjusted as needed. While holding down the [SCENE MEMORY] key of the DISPLAY ACCESS section, turn on the power switch. After the opening screen, the following startup menu screen will appear. 1 LCD CONTRAST CALIBRATION Press the RACK [1-4] key and [5-8] key in the DISPLAY ACCESS section on the con- trol panel simultaneously. The following screen for “LCD CONTRAST CALIBRATION” will appear. 2 Adjust the screen with the parameter dial un- til both the numbers “1”...
Page 186
LS9-16/LS9-32
186
©ßæÒ蔳ãï; ó
; ó›–lo Ð
TpV‡b{
%*41-:$$&44
Page 187
187 LS9-16/LS9-32 %*41-:$$&44
Page 188
LS9-16/LS9-32
188
žAt aoz-$% hØw Ð
TUpV‡b{
%*41-:$$&44
Page 189
![Page 189
189
LS9-16/LS9-32
START-UP SEQUENCE
A1. Start-up mode
ModeMode Changing MethodDescription on the Operation
Normal modeThis mode is selected as
default without any special
operation
Checks the hardware at the start-up.
Normal operation starts if there is no error.
If an error is detected, the mode will change to Maintenance mode automa\
tically.
Forced Factory
Preset mode
W h i l e h o l d i n g d o w n t h e
[SCENE] key and [MIX1]
key, turn on the power.
Executes the Factory Preset...](http://img.usermanuals.tech/thumb/83/98063/w300_d_1507181543-yamaha-ls-9-service-manual_d-188.png "Page 189
189
LS9-16/LS9-32
START-UP SEQUENCE
A1. Start-up mode
ModeMode Changing MethodDescription on the Operation
Normal modeThis mode is selected as
default without any special
operation
Checks the hardware at the start-up.
Normal operation starts if there is no error.
If an error is detected, the mode will change to Maintenance mode automa\
tically.
Forced Factory
Preset mode
W h i l e h o l d i n g d o w n t h e
[SCENE] key and [MIX1]
key, turn on the power.
Executes the Factory Preset...")
189 LS9-16/LS9-32 START-UP SEQUENCE A1. Start-up mode ModeMode Changing MethodDescription on the Operation Normal modeThis mode is selected as default without any special operation Checks the hardware at the start-up. Normal operation starts if there is no error. If an error is detected, the mode will change to Maintenance mode automa\ tically. Forced Factory Preset mode W h i l e h o l d i n g d o w n t h e [SCENE] key and [MIX1] key, turn on the power. Executes the Factory Preset...
Page 190
![Page 190
LS9-16/LS9-32
190
A2. Start-up mode (flow)
Normal modeForced Factory Preset modeMaintenance modeDiag mode
[SCENE] key + [MIX1] key[SCENE] keyPress the USER DEFINED KEYS [1], [2], and [3] simultaneously orpress any three keys other than the above three keys simultaneously.Turn on power
Boot Loader starts
Presence of USB MemoryChecking the presence of the LS9 Firmware (.PGM) file
(None)(.PGM file is contained)Firmware Update confirmation indication
(Canceling Update)Executing Firmware Update
Executing...](http://img.usermanuals.tech/thumb/83/98063/w300_d_1507181543-yamaha-ls-9-service-manual_d-189.png "Page 190
LS9-16/LS9-32
190
A2. Start-up mode (flow)
Normal modeForced Factory Preset modeMaintenance modeDiag mode
[SCENE] key + [MIX1] key[SCENE] keyPress the USER DEFINED KEYS [1], [2], and [3] simultaneously orpress any three keys other than the above three keys simultaneously.Turn on power
Boot Loader starts
Presence of USB MemoryChecking the presence of the LS9 Firmware (.PGM) file
(None)(.PGM file is contained)Firmware Update confirmation indication
(Canceling Update)Executing Firmware Update
Executing...")
LS9-16/LS9-32 190 A2. Start-up mode (flow) Normal modeForced Factory Preset modeMaintenance modeDiag mode [SCENE] key + [MIX1] key[SCENE] keyPress the USER DEFINED KEYS [1], [2], and [3] simultaneously orpress any three keys other than the above three keys simultaneously.Turn on power Boot Loader starts Presence of USB MemoryChecking the presence of the LS9 Firmware (.PGM) file (None)(.PGM file is contained)Firmware Update confirmation indication (Canceling Update)Executing Firmware Update Executing...