Yamaha Dvx S100 Owners Manual

17
CONNECTIONS
PREPARATION
English
Connecting the speakers
Connect the included speakers to the DVD AUDIO/VIDEO receiver (DVR-S100) using the included speaker cables and
system connector cables as shown below.
L
IN
VIDEO 1 VIDEO 2VIDEO
VCR
IN ININ IN IN
OUT OUT
IN IN IN INOUT OUTOUT OUT
S VIDEOMONITOR
ANALOGMD/CD-R FRONT CENTERSYSTEM MONITOR
6CH PREOUTVIDEO 1 VIDEO 2 VCR
REAR
SUBWOOFER[
B][
A]RCOAXIAL
INMD/CD-R
FM ANT75ΩUNBAL.GND – AM ANT
MD/CD-R VIDEO 1
DIGITALOPTICAL
INOPTICAL
OUT
CONNECTOR
MARK
TO...

18
CONNECTIONS
y
•The connector of the included speaker cable and the terminal of
the subwoofer are classified by color. Connect the same colors.
•The label of the speaker is attached to each speaker cable.
Connect the speakers in accordance with the labels.
•Connect the color tube of the speaker cable to the plus (+) side
of each speaker. If the polarity of the speaker connections is
incorrect, the sound will be unnatural and lack bass.
•A cover is attached to the end of the speaker cable. Connect the...

19
CONNECTIONS
PREPARATION
English
Connecting to an external
amplifier
If you want to increase the power output to the speakers,
or want to use another amplifier, connect an external
amplifier to the 6CH PREOUT jacks as follows.
Note
•When you have connected this unit to an external amplifier,
select PRE in “9 SP/PRE OUT” on the SET MENU. (See page
63.)
1FRONT jacks
Front channel line output jacks.
2REAR jacks
Rear channel line output jacks.
3CENTER jack
Center channel line output jack.
4SUBWOOFER jack...

20
ADJUSTING SPEAKER OUTPUT LEVELS
This section explains how to adjust speaker output levels
using the test tone generator. When this adjustment is
complete, the output level heard at the listening position
should be the same from each speaker. This is important
for best performance of the digital sound field processor,
and the various decoders (Dolby Digital, Dolby Pro
Logic, Dolby Pro Logic II and DTS).
Note
•Since this unit cannot enter the test mode while headphones are
connected to this unit, be...

21
USING BASIC FUNCTIONS
English
BASIC PLAYBACK
Basic operations
You can play the software loaded on the audio and video
components connected to this unit.
Indication on the front panel display (example):
1Press POWER () to turn on the power.
2Turn on the A/V component connected to
this unit.
3Press INPUT H/G on the front panel
repeatedly (one of the input selector buttons
on the remote control) to select the input
source.
The selected input source name and input mode
appear on the front panel display...

22
BASIC PLAYBACK
When you have finished using
this unit
Press STANDBY/ON on the front panel (POWER ()
on the remote control) to set this unit in the standby
mode.
Setting the sleep timer
Use this feature to automatically set this unit in the
standby mode after the amount of time you have set. The
sleep timer is useful when you are going to sleep while
this unit is playing or recording a source.
y
•By connecting a commercially available timer to this unit, you
can also set a wake-up timer. Refer to the...

23
BASIC PLAYBACK
English
USING BASIC FUNCTIONS
Selecting a sound field program
This unit’s built-in DSP (Digital Sound field Processor) can simulate various acoustic environments, including a concert
hall and movie theater, with its 9 sound field programs. For the best results, choose a program appropriate for the
selected audio source.
1Press AMP.
2Press one of the DSP program buttons on
the remote control to select the desired
program.
3After selecting the desired program, press
the same button...

24
BASIC PLAYBACK
No.
4
5
6
7
8
9
9Program
ENTERTAINMENT/
Game
ENTERTAINMENT/
Concert Video
TV SPORTS
MONO MOVIE
MOVIE THEATER 1/
Spectacle
MOVIE THEATER 1/
Sci-Fi
MOVIE THEATER 2/
Adventure
MOVIE THEATER 2/
General
q/DTS/ENHANCED
q/DTS/NORMAL
Features
This program adds a deep and spatial feeling to video game sounds.
This program produces an enthusiastic atmosphere and lets you feel as if you are at an actual
jazz or rock concert.
With this program, you can enjoy watching various TV programs such as...

25
BASIC PLAYBACK
English
USING BASIC FUNCTIONS
Table of Program Names for Each Input Format
This unit automatically chooses the appropriate decoder and DSP sound field pattern according to the input signal
format.
MOVIE
THEATER 1
MOVIE
THEATER 2
DOLBY
DIGITAL
DTS DIGITAL
SUR
PRO LOGIC
PRO LOGIC II
2 channel
ANALOG, PCM,
DOLBY DIGITAL, DTS
70 mm Spectacle
70 mm Sci-Fi
70 mm Adventure
70 mm General
—
—
—
—
Normal
Enhanced
Movie
Music
DOLBY DIGITAL
DGTL Spectacle
DGTL Sci-Fi
DGTL Adventure
DGTL General...

26
BASIC PLAYBACK
Selecting PRO LOGIC II
You can enjoy the 2-channel sources decoded into five
discrete channels by selecting PRO LOGIC II in program
No. 9.
(While playing a 2-channel source)
1Press AMP.
2Press q/DTS.
The previously selected sub program appears on the
front panel display.
3Press SELECT repeatedly to select the
decoder, PRO LOGIC II.
4After selecting on the decoder (PRO LOGIC
II), select the mode appropriate for the
source by pressing q/DTS.
The selection switches as follows;
PRO LOGIC...