Yamaha Dvx S100 Owners Manual

47
PLAYING A DISC
English
SETUP MENU
With the setup menu, you can change this unit’s system
defaults to suit your preference and this system.
Operating the setup menu
1Press SETUP while pressing SHIFT.
The menu screen appears on the video monitor.
2Press the cursor buttons (j, i) to select a
menu group.
There are five menu groups. The screen shows the
items that belong to the menu group of the selected
tab.
3Press the cursor buttons (u, d) to select the
desired item and press ENTER.
4Press the cursor...

48
SETUP MENU
Summary of settings
The following chart shows the menu groups and each items. In the “Options” column, the factory settings are
underlined.
Menu groups
Disc
Video
Items
Audio DVD-A DVD-VSelect the preferred audio track language.
Subtitle DVD-A DVD-VSelect the preferred subtitle language.
Menus DVD-A DVD-VSelect the preferred disc menu language.
Ratings DVD-VSet a ratings level to limit DVD-Video play. See p.51 for details.
TV Aspect
If you connect to a 4:3 conventional-type monitor, select...

49
SETUP MENU
PLAYING A DISC
English
Menu groups
Video
Audio
Display
Items
Black Level Control
(U.S.A. and Canada models)
Change the black level of the picture. Select “Lighter” when you
connect to the monitor using VIDEO or S VIDEO terminal. Select
“Darker” when using COMPONENT terminals.
NTSC Disc Output
(U.K., Europe, Australia and General models)
Select video signal format (PAL 60 or NTSC) to be output when
playing NTSC disc.
Speaker Setting DVD-A DVD-VAdjust the settings to suit your audio system...

50
SETUP MENU
Menu groups
Others
Items
DVD-Video Mode
Some DVD-Audio discs contain the DVD-Video contents that can
be played only by a DVD-Video player. If you want to play the
contents, select “On”. If not, select “Off”.
Demo
A demonstration of the unit’s on-screen displays starts when you
select “On”. The demonstration stops when you press button a etc.
and the setting reverts to “Off”.
Options
Off On
Off On
Notes
• * If you set to “Original” at Audio, the original language of each disc is selected.
**...

51
SETUP MENU
PLAYING A DISC
English
Ratings DVD-V
Depending on software capability, you can prevent discs
or scenes with objectionable material from being played
according to your desired rating. You can select the level
and lock it by designating a password.
Setting method (Level 8)
1Press SETUP while pressing SHIFT.
The menu screen appears on the video monitor.
2Press d to select “Ratings” and press
ENTER.
3Enter 4-digit number with numeric buttons
and press ENTER.
Press CANCEL if you want to...

52
SETUP MENU
Speaker settings DVD-A DVD-V
When you adjust speakers while DISC DIRECT is
functioning, follow the procedures described below.
If you wish to enjoy multi-channel sound reproduction,
you need to select “Multi-channel” on the setup menu and
make following adjustments.
When you select “2-channel”, that is, when connecting to
only 2 speakers or a Dolby Pro Logic decoder, the
following adjustments are not necessary.
VIDEO 1
SHIFTCODE SET
1HALL2JAZZ
SETUP3ROCK...

53
SETUP MENU
PLAYING A DISC
English
bDelay time
(Only center/rear channels of the
DVD-Video discs recorded in the
Dolby Digital format)
To obtain the maximum effect of Dolby Digital 5.1
channel source, all speakers should be located at the same
distance from the listening position. However, in many
cases the center speaker is placed in line with the front
speakers, etc. You can virtually increase the distance of
the center and rear speakers by adjusting the delay time.
1Press the cursor buttons (u, d,...

54
TUNING
C1:AM 630 kHz
TUNERSP
Indication on the front panel (example)
Preset station
number
Reception band
Station frequency Colon
*1Preset station
group
*1 The colon (:) lights up in the preset mode and goes off in the tuning
mode.
Automatic and manual tuning
There are 2 ways to tune; automatic and manual.
Automatic tuning is effective when station signals are
strong and there is no interference.
Automatic tuning
1Press INPUT H / G (TUNER on the remote
control) to select TUNER as the input source....

TUNING
55
TUNING
English
Presetting stations
Automatically presetting stations
(for FM stations)
This function enables this unit to automatically tune in to
FM stations with strong signals, and to store up to 40 (8
stations x 5 groups) of those stations in order. This feature
enables you to easily tune in to any preset station by
selecting the preset station number.
1Press PRESET/BAND to select the FM band.
2Press AUTO/MAN’L so that the “AUTO”
indicator lights up on the front panel display.
3Press and...

TUNING
56
Exchanging preset stations
You can exchange the assignment of two preset stations.
The example below describes the procedure for
exchanging preset station “E1” with “A5”.
1Tune in to preset station “E1” by using the
A/B/C/D/E and PRESET/TUNING u / d.
See “Tuning in to a preset station” at left.
2Press and hold PRESET/BAND for more than
3 seconds.
“E1” appears and the “MEMORY” indicator flashes
on the front panel display.
3Tune in to preset station “A5” by using the
A/B/C/D/E and PRESET/TUNING u...