Yamaha Dvx S100 Owners Manual

57
REMOTE CONTROL FEATURES
English
OPERATING OTHER COMPONENTS USING THE REMOTE CONTROL
Setting the manufacturer code (remote control signal
assigned to each manufacturer) for your TV, VCR or MD/
CD recorder on the remote control allows you to operate
not only the DVX-S100 but also your TV, VCR or MD/
CD recorder using the remote control.
Note
•Depending on the model, certain components from other
manufacturers cannot be controlled, or only limited functions
can be controlled, even though the proper...

OPERATING OTHER COMPONENTS USING THE REMOTE CONTROL
58
TV
CHINPUTTUNER
MUTECD–R
VCR
VIDEO 2
VIDEO 1
MD
AVSLEEPPOWER
TV MODE
POWER
VOL
RECAUDIOSUBTITLE
SHIFTCODE SET
1HALL2JAZZ
SETUP3ROCK
ANGLE4ENTERTAINMENTMARKER5SPORTS6MONO MOVIE
PLAY MODE7MOVIE 1
REPEAT8MOVIE 2
A–B
DVDCDAMP
9/DTS
TOP MENULEVELMENUSET MENU
TESTON SCREENB. BOOST
RETURN
0SELECT>
–10MATRIX 6.1
GROUPCANCELSTEREO
PAGE
MUTE
VOL
ABCDE
ENTER
PRESET
PRESETCHCH
1
2
3
4
5
6
Table of control buttons
When you press the input selector button for...

59
English
ADJUSTMENTS
Adjusting the items on the SET
MENU
Adjustment should be made with the remote control.
Note
•Some items require extra steps.
1Press AMP.
2Press SET MENU to enter the SET MENU.
3Press u/d repeatedly to select the item you
want to adjust (1 to 9).
y
•By pressing SET MENU repeatedly, you can select items in the
same order as when pressing d.
4Press j / i once to enter the setup mode of
the selected item.
The last setting you adjusted appears on the front
panel display.
Depending on...

SET MENU
60
1 SPEAKER SET (speaker mode
settings)
Use this feature to select suitable output modes for your
speaker configuration.
If you do not use one or any of the included speakers, or
if you use other speakers instead of the included speakers,
set the following.
Note
•When 96-kHz sampling digital signals are input to this unit,
some items are not affected.
1A CENTER (center speaker
mode)
By adding a center speaker to your speaker configuration,
this unit can provide better dialog localization for...

SET MENU
61
English
ADJUSTMENTS
1D BASS (LFE/bass out mode)
LFE signals carry low-frequency effects when this unit
decodes a Dolby Digital or DTS signal. Low-frequency
signals are defined as 90 Hz and below. The Low-
frequency signals can be directed to both front left and
right speakers, and the subwoofer (subwoofer can be used
for both stereo reproduction and the DSP program).
Choices: SWFR (subwoofer), FRONT, BOTH
SWFR
Select this if you use a subwoofer. The LFE signals are
directed to the...

SET MENU
62
L
CC
R
RLRR
3 SP DLY TIME (speaker delay
time)
Use this feature to adjust the delay of the center channel
sounds. This feature works when there is sound output
from the center speaker, with a source like Dolby Digital
or DTS, etc. Ideally, the center speaker should be the
same distance from the main listening position as the left
and right speakers.
However, in most home situations, the center speaker is
placed in line with the front speakers. By delaying the
sound from the center speaker,...

SET MENU
63
English
ADJUSTMENTS
7 I/O ASSIGN (input assignment)
It is possible to assign jacks according to the component
to be used if this unit’s DIGITAL INPUT jack settings
(component names for jacks) differ from that component.
This makes it possible to change the jack assignment and
effectively connect more components.
Once you assign, you can select that component with
INPUT H / G on the front panel (or the input selector
buttons on the remote control).

[A] OPTICAL INPUT jack
Choices:VIDEO 1,...

64
You can adjust the output level of each effect speaker
(center, rear left and right, and subwoofer) while listening
to a source.
(While playing a source)
1Press AMP.
2Press LEVEL repeatedly to select the
speaker(s) you want to adjust.
Each time you press LEVEL, the selected speaker
changes and appears on the front panel display as
follows: center, rear right, rear left and subwoofer.
CENTER (Center speaker) ^ R SUR. (Rear right
speaker) ^ L SUR.(Rear left speaker) ^ SWFR
(Subwoofer) ^ CENTER (Center...

65
English
ADJUSTMENTS
Adjusting the delay time
You can adjust the time difference between the beginning
of the sound from the front speakers and the beginning of
the sound effect from the rear speakers. The larger the
value, the later the sound effect is generated. The delay
time can be individually adjusted to all DSP programs.
(While playing a source)
1Press AMP.
2Select a DSP program you want to adjust the
delay time.
3Press u / d so that “DELAY” appears on the
front panel display.
4Press j / i to...

CHANGING THE PARAMETER SETTINGS FOR DSP PROGRAMS
66
Adjusting the parameter settings for PRO LOGIC II Music
Changing parameter settings
You can adjust the values of PRO LOGIC II Music
parameters so the sound fields are recreated accurately in
your listening room.
1Press AMP.
2Press the numeric buttons 9 and 0
repeatedly to select PRO LOGIC II Music.
3Press u / d to select the parameter.
4Press j / i to change the parameter value.
5Repeat steps 3 and 4 above as necessary to
change other parameters.
PRO...