Yamaha Cl 5 User Guide

 Data List
8Effects Parameters
REV-X HALL, REV-X ROOM, REV-X PLATENewly-developed two input, two output reverb algorithm. Delivers dense and rich 
reverberation, smooth decay, and provides a spaciousness and depth that enhances the 
original sound. Choose from three types depending on your location and needs: REV-X 
HALL, REV-X ROOM, and REV-X PLATE.REVERB HALL, REVERB ROOM, REVERB STAGE, REVERB PLATEOne input, two output hall, room, stage, and plate reverb simulations, all with gates....

 Data List
9
STEREO REVERBTwo input, two output stereo reverb.EARLY REF.One input, two output early reflections.
GATE REVERB, REVERSE GATEOne input, two output early reflections with gate, and early reflections with reverse gate.MONO DELAYOne input, one output basic repeat delay.STEREO DELAYTwo input, two output basic stereo delay.
Parameter
Range
Description
REV TIME0.3-99.0 s Reverb time
REV TYPEHall, Room, Stage, Plate Reverb type
INI. DLY0.0-100.0 ms Initial delay before reverb begins
HI....

 Data List
10
MOD. DELAYOne input, two output basic repeat delay with modulation.DELAY LCROne input, two output 3-tap delay (left, center, right).
ECHOTwo input, two output stereo delay with crossed feedback loop.CHORUSTwo input, two output chorus effect.
Parameter
Range
Description
DELAY0.0-2725.0 ms Delay time
FB. GAIN-99 to +99% Feedback gain
HI. RATIO0.1-1.0 High-frequency feedback ratio
FREQ.0.05-40.00 Hz Modulation speed
DEPTH0-100% Modulation depth
WAVESine/Tri Modulation waveform
HPFTHRU,...

 Data List
11
FLANGETwo input, two output flange effect.SYMPHONICTwo input, two output symphonic effect.
PHASERTwo input, two output 16-stage phaser.DYNA.FLANGETwo input, two output dynamically controlled flanger.
Parameter
Range
Description
FREQ.0.05-40.00 Hz Modulation speed
DEPTH0-100% Modulation depth
MOD. DLY0.0-500.0 ms Modulation delay time
FB. GAIN-99 to +99%Feedback gain (plus values for normal-phase feedback, minus values for 
reverse-phase feedback)
WAVESine, Tri Modulation waveform...

 Data List
12
DYNA.PHASERTwo input, two output dynamically controlled phaser.HQ.PITCHOne input, two output high-quality pitch shifter.
DUAL PITCHTwo input, two output pitch shifter.TREMOLOTwo input, two output tremolo effect.
Parameter
Range
Description
SOURCEINPUT, MIDIControl source:
input signal or MIDI Note On velocity
SENSE0-100 Sensitivity
DIR.UP, DOWN Upward or downward frequency change
DECAY
*1
*1. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz)Decay speed
OFFSET0-100 Lowest...

 Data List
13
AUTOPANTwo input, two output autopanner.ROTARYOne input, two output rotary speaker simulator.
RING MOD.Two input, two output ring modulator.MOD.FILTERTwo input, two output modulation filter.DYNA.FILTERTwo input, two output dynamically controlled filter.
Parameter
Range
Description
FREQ.0.05-40.00 Hz Modulation speed
DEPTH0-100% Modulation depth
DIR.
*1
*1. LR, LR, LR ,  Tu r n  L ,  Tu r n  RPanning direction
WAVESine, Tri, Square Modulation waveform
SYNCOFF/ON Tempo parameter sync...

 Data List
14
REV+CHORUSOne input, two output reverb and chorus effects in parallel.REVCHORUSOne input, two output reverb and chorus effects in series.
REV+FLANGEOne input, two output reverb and flanger effects in parallel.REVFLANGEOne input, two output reverb and flanger effects in series.
Parameter
Range
Description
REV TIME0.3-99.0 s Reverb time
INI. DLY0.0-500.0 ms Initial delay before reverb begins
HI. RATIO0.1-1.0 High-frequency reverb time ratio
DIFF.0-10 Diffusion (spread)
DENSITY0-100%...

 Data List
15
REV+SYMPHO.One input, two output reverb and symphonic effects in parallel.REVSYMPHO.One input, two output reverb and symphonic effects in series.
REVPA NThis is a 1-in/2-out series-connected reverb and auto-pan effect.DELAY+ER.One input, two output delay and early reflections effects in parallel.
Parameter
Range
Description
REV TIME0.3-99.0 s Reverb time
INI. DLY0.0-500.0 ms Initial delay before reverb begins
HI. RATIO0.1-1.0 High-frequency reverb time ratio
DIFF.0-10 Diffusion...

 Data List
16
DELAYER.One input, two output delay and early reflections effects in series.DELAY+REVOne input, two output delay and reverb effects in parallel.
DELAYREVOne input, two output delay and reverb effects in series.
Parameter
Range
Description
DELAY L0.0-1000.0 ms Left channel delay time
DELAY R0.0-1000.0 ms Right channel delay time
FB. DLY0.0-1000.0 ms Feedback delay time
FB. GAIN-99 to +99%Feedback gain (plus values for normal-phase feedback, minus values for 
reverse-phase feedback)
HI....

 Data List
17
DISTDELAYOne input, two output distortion and delay effects in series.MULTI FILTERTwo input, two output 3-band multi-filter (24 dB/octave).
FREEZEOne input, two output basic sampler.DISTORTIONOne input, two output distortion effect.
Parameter
Range
Description
DST TYPEDST1, DST2, OVD1, 
OVD2, CRUNCHDistortion type (DST = distortion, OVD = overdrive)
DRIVE0-100 Distortion drive
MASTER0-100 Master volume
TONE-10 to +10 Tone control
N. GATE0-20 Noise reduction
SYNCOFF/ON Tempo parameter...