Xerox WorkCentre 5020 User Manual

Safety Notes 
Xerox WorkCentre 5016/5020 User Guide 11
Operational Safety Information
To ensure the continued safe operation of your Xerox equipment, follow these safety 
guidelines at all times.
Do These:
• Always connect equipment to a correctly grounded power outlet. If in doubt, have 
the outlet checked by a qualified electrician.
• This equipment must be connected to a protective earth circuit.
This equipment is supplied with a plug that has a protective earth pin. This plug will 
fit only into an...

Safety Notes 
Xerox WorkCentre 5016/5020 User Guide 12
• Do not remove covers or guards that are fastened with screws. There are no parts 
behind these covers that you can maintain or service.
• Do not perform any maintenance procedures unless you have been trained to do 
them by an authorized local dealer or unless a procedure is specifically described in 
the user manuals.
Ozone Information
This product produces ozone during normal operation. The ozone produced is heavier 
than air and is dependent on...

Regulatory Information 
Xerox WorkCentre 5016/5020 User Guide 13
USA
NOTE: This equipment has been tested and found to comply with the limits for a Class 
A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference when the equipment is 
operated in a commercial environment. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in accordance with the 
instruction manual,...

Environmental Compliance 
Xerox WorkCentre 5016/5020 User Guide 14
Environmental Compliance
USA
ENERGY STAR
As an ENERGY STAR® partner, Xerox Corporation has determined that the basic 
configuration of this product meets the ENERGY STAR guidelines for energy 
efficiency.
The ENERGY STAR and ENERGY STAR MARK are registered United States 
trademarks.
The ENERGY STAR Imaging Equipment Program is a team effort between U.S., 
European Union and Japanese governments and the imaging equipment industry to...

Product Recycling and Disposal 
Xerox WorkCentre 5016/5020 User Guide 15
Product Recycling and Disposal
All Countries, North America - USA/Canada
Xerox operates a worldwide equipment takeback and reuse/recycle program. Contact 
your Xerox sales representative at (1-800-ASK-XEROX) to determine whether this 
Xerox product is part of the program. For more information about Xerox environmental 
programs, visit www.xerox.com/environment.
If you are managing the disposal of your Xerox product, please note that...

Xerox WorkCentre 5016/5020 User Guide 16
2 Product Overview
This chapter describes each component of the machine, explains how to switch the 
machine on and off, and provides information on the use of recycled paper.
Machine Components
This section describes machine components and their functions.
Front View
No. Component Function
1 Left Side Cover Open this cover when a paper jam occurs in the machine and when 
replacing consumables. 
For information on how to clear paper jams, refer to Paper Jams...

Machine Components 
Xerox WorkCentre 5016/5020 User Guide 17
2 Bypass Tray Load standard size paper and non-standard size paper. It holds special 
media such as thick stock paper or other special media that cannot be 
loaded in Tray 1 or Tray 2.
For more information on the supported paper types and capacity of the Bypass 
Tray, refer to Supported Paper Sizes and Types (P.40).
3 Extension Flap Supports paper that is loaded in the Bypass Tray. Slide out this flap 
before loading paper in the Bypass Tray.
4...

Machine Components 
Xerox WorkCentre 5016/5020 User Guide 18
Inside View
No. Component Function
17 Document Cover Close this cover when scanning a document on the Document Glass.
18 Document Glass Place a document here, face down.
19 Fuser Unit Fuses toner onto the paper by applying heat and pressure. Do not touch 
this unit. It may become extremely hot.
20 Drum Cartridge Contains toner and photoconductor used to transfer the toner.
21 Duplex Module Copies and prints on both sides of paper.
Note •The...

Machine Components 
Xerox WorkCentre 5016/5020 User Guide 19
Rear View
No. Component Function
22 Data Label Contains the machine information.
Downloaded From ManualsPrinter.com Manuals 

Control Panel 
Xerox WorkCentre 5016/5020 User Guide 20
Control Panel
This section describes Control Panel components and their functions.
Display
Displays the copy quantity, zoom ratio, error 
code, machine status, or numerical values.
 button/indicators
Press this button to switch the Display 
between the copy quantity and the zoom 
ratio. The indicator lights up to show which 
is currently being displayed.
When the machine is in the Paper Setting 
Mode, press this button to scroll through 
paper...