Xerox WorkCentre 4150xf User Manual

3 Copy 
Xerox WorkCentre 4150 User Guide 29
Off: Use to deactivate the feature.
Left Page: Use to scan and copy the left page of a bound document.
Right Page: Use to scan and copy the right page of a bound document.
Both Pages: Use to scan and copy both pages of a bound document.
Original Size
Use this option to program the size of the originals being scanned or enable 
the machine to recognize the size of the originals.
Auto Detect: Use this option to allow the machine to automatically recognize 
the...

3 Copy 
30 Xerox WorkCentre 4150 User Guide
Edge Erase
Use this feature to “refresh” the quality of an original that has become torn or 
frayed at the edges, or that has hole punch, staple or other marks.
Off: Use to deactivate the feature.
Border Erase: Erases equal amounts on all edges of the copies. 
Small Original Erase: Use to erase 0.25 (6 mm) from the edge of the 
document.
Hole Punch Erase: Use to erase hole punch marks from the left and right 
edge of the document.
Book Center and Edges Erase:...

3 Copy 
Xerox WorkCentre 4150 User Guide 31
Output Format
The Output Format tab is used to produce different options for the finished 
output.
Booklet Creation
Use this feature to create booklets from a sequential set of either single-sided 
or double-sided originals. The machine prints 2-sided automatically, which, 
when folded, produces a booklet with all the pages in the correct sequence. 
The machine will also reduce and correctly position each image to fit on the 
selected paper. 
NOTE: Feed the...

3 Copy 
32 Xerox WorkCentre 4150 User Guide
Covers
Use this feature to automatically add covers to your copied set using stock 
taken from a different tray than the copies. Covers must be the same size and 
orientation as the main body of the job.
No Covers: The feature is switched off.
Front Only: Use this option to add a front cover to the copies.
Back Only: Use this option to add a back cover to the copies.
Front and Back: Use this option to add both a front and back cover to the 
copies.
Transparency...

3 Copy 
Xerox WorkCentre 4150 User Guide 33
Multi-Up
This feature is used to copy two or more documents, in a reduced size, onto 
one sheet of paper. It is ideal for creating handouts, storyboards or documents 
used for archival purposes.
NOTE: Originals must be loaded in the document feeder when using this 
feature.
1 Page Up: Copies an original onto one sheet of paper.
2 Pages Up: Copies two separate originals onto one sheet of paper.
4 Pages Up: Copies four separate originals onto one sheet of paper....

3 Copy 
34 Xerox WorkCentre 4150 User Guide
ID Card Copy
Use this feature to copy both sides of an ID document, e.g. a driver’s license, 
onto one side of paper.
1.Select All Services to display the All Services screen.
2.Select ID Card Copy to display the ID Card Copy screen. 
3.Configure the output to improve the quality of the copy. 
Paper Supply: Use the Paper Supply options to select a paper tray for the 
copy job.
Lighten / Darken: Adjusts the lightness or darkness of the output. To 
darken the...

Xerox WorkCentre 4150 User Guide 35
4  Fax
Fax is an optional feature which may not be available on your machine. There are two 
types of Fax service - Embedded Fax and Server Fax. Although both fax services can 
be installed, only one fax service can be enabled. Your System Administrator will set 
up the default fax service. This chapter contains information about the options available 
within both fax services.
NOTE: Embedded Fax is the default service when both fax services are installed.
Embedded...

4 Fax 
36 Xerox WorkCentre 4150 User Guide
number you entered.  If the Basic Faxing screen looks like the one shown 
below then Server Fax is enabled.
Access to the Basic Faxing features is gained using the All Services button 
on the touch screen. Depending on the options enabled and how your 
machine has been configured, you may have to select All Services and Fax 
to display the Fax feature tabs.
The tabs available for selecting Fax features are:
•Basic Faxing on page 42.
•Image Adjustment on page...

4 Fax 
Xerox WorkCentre 4150 User Guide 37
Fax Procedure
This section describes the basic procedure for sending faxes. Follow the steps 
below.
Load the Documents – page 37
Select the Features – page 38
Dial the Number - page 40
Start the Fax Job – page 40
Job Status Screen – page 40
Stop the Fax Job - page 41
NOTE: If the Authentication feature is enabled, you may need an account 
number before using the machine. To get an account number, or for more 
information, contact the Key Operator or the System...

4 Fax 
38 Xerox WorkCentre 4150 User Guide
L Up to 50 sheets of 20 
lb (80 g/m2) bond paper can 
be loaded. Weight ranges 
from 12 lb to 28 lb (50 - 120 
g/m
2) - refer to Electrical 
Specifications in the 
Specifications chapter on 
page 166 for full Document 
Feeder Specifications.
3.Place the stack in the middle of the guides aligning the left edge with the 
document feeder tray, and position the guides to just touch the edge of 
the documents.
4.When Paper Supply is set to Auto, the machine...