Xerox WorkCentre 3045 Service Manual

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 4-71Service Parts Disassembly
Bottom Plate
PL2.2.8
1. Remove the Main Tray (page 4-58).
2. Remove the Front Cover (page 4-60).
3. Remove the Inner Front Cover (page 4-62).
4. Remove the Left Cover (page 4-64).
5. Remove the Right Cover (page 4-57).
6. Remove the Scanner (page 4-109).
7. Disconnect P/J7601 from the Front USB Board.
8. Disconnect P/J6501 from the WiFi Adaptor.
9. Remove the Top Cover (page 4-7).
10. Remove the Rear Cover...

4-72 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  Service Parts Disassembly
26. Remove the bottom chute.
27. Release the hook that secures the cam follwer bearings and remove the 
bearings and followers from the chassis.
s3040-053
s3040-031 

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 4-73Service Parts Disassembly
28. Flex the Bottom Plate to release one end from the chassis and remove.
Replacement Note
Attach the spring to the Bottom Plate before installing the followers.
s3040-122 

4-74 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  Service Parts Disassembly
Separator Pad Assembly
PL2.2.15
1. Remove the Rear Door (page 4-8).
2. Press inward on the left side retainer to release the left side boss and remove 
the lower chute.
3. Remove the Registration Sensor Actuator (page 4-28).
s3040-074 

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 4-75Service Parts Disassembly
4. Release the hook at each side of the housing to release the assembly from the 
chassis.
s3040-033 

4-76 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  Service Parts Disassembly
Feed Gear and Spring
PL2.2.19
Caution
The gears of the Main Drive Assembly are not captive to the cover. Use care 
when removing the cover to maintain the correct gear orientation.
1. Remove the Main Tray (page 4-58).
2. Remove the Front Cover (page 4-60).
3. Remove the Inner Front Cover (page 4-62).
4. Remove the Left Cover (page 4-64).
5. Remove the Right Cover (page 4-57).
6. Remove the Scanner (page...

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 4-77Service Parts Disassembly
Registration Pinch Roller
PL2.3.2
1. Remove the Main Tray (page 4-58).
2. Remove the Front Cover (page 4-60).
3. Remove the Inner Front Cover (page 4-62).
4. Remove the Left Cover (page 4-64).
5. Remove the Right Cover (page 4-57).
6. Remove the Scanner (page 4-109).
7. Disconnect P/J7601 from the Front USB Board.
8. Disconnect P/J6501 from the WiFi Adaptor.
9. Remove the Top Cover (page 4-52).
10. Remove the...

4-78 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  Service Parts Disassembly
16. Remove the registration springs and bearings from the ends of the pinch roller 
shaft and remove the shaft from the chassis.
s3040-034 

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 4-79Service Parts Disassembly
Registration Roller
PL2.3.1
Caution
The gears of the Main Drive Assembly are not captive to the cover. Use care 
when removing the cover to maintain the correct gear orientation.
1. Remove the Main Tray (page 4-58).
2. Remove the Front Cover (page 4-60).
3. Remove the Inner Front Cover (page 4-62).
4. Remove the Left Cover (page 4-64).
5. Remove the Right Cover (page 4-57).
6. Remove the Scanner (page 4-109)....

4-80 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  Service Parts Disassembly
19. Remove the bearing from each end of the roller shaft, then remove the roller 
from the chassis.
s3040-077