Xerox WorkCentre 3045 Service Manual

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 4-51Service Parts Disassembly
WorkCentre 3045 Covers
Holder Assemblies
PL1.1.1, 1.1.2
1. Remove the Main Tray (page 4-58).
2. Remove the Front Cover (page 4-60).
3. Raise the Scanner Assy.
4. Remove the Inner Front Cover (page 4-62).
5. Remove 2 screws (silver, tap, 8mm) that secure the Holder Assemblies, then 
slide the Holder Assemblies forward to release the hooks and carefully lift the 
Scanner to remove the assemblies.
s3040-058 

4-52 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  Service Parts Disassembly
To p  C o v e r
PL1.1.7
1. Remove the Main Tray (page 4-58).
2. Remove the Front Cover (page 4-60).
3. Raise the Scanner Assy.
4. Remove the Inner Front Cover (page 4-62).
5. Remove the Left Cover (page 4-64)
6. Remove the Right Cover (page 4-57)
7. Remove the Scanner (page 4-109).
8. Remove the Front USB Board (page 4-65).
9. Remove the WiFi bracket if present (page 4-66).
10. Remove 2 screws (silver,...

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 4-53Service Parts Disassembly
Rear Door
PL1.1.7
1. Open the Rear Door.
2. Release the boss from the left hinge and remove the Rear Door.
s3040-060 

4-54 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  Service Parts Disassembly
Transfer Roller Bearings
PL1.1.9, 1.1.10
1. Open the Rear Door.
2. Release the bearing lock and rotate the bearing to align the key with the notch 
and remove the bearing from the Transfer Roller shaft.
s3040-061 

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 4-55Service Parts Disassembly
Transfer Roller
PL1.1.11
1. Open the Rear Door.
2. Remove the right side Transfer Roller bearing (page 4-9) and remove the 
Transfer Roller from the Rear Door.
s3040-061 

4-56 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  Service Parts Disassembly
Rear Cover
PL1.1.12
1. Open the Rear Door.
2. Remove the Main Tray (page 4-58).
3. Remove the Front Cover (page 4-60).
4. Remove the Right Cover (page 4-57).
5. Remove the Left Cover (page 4-64)
6. Remove the Scanner (page 4-109).
7. Remove the Front USB Board (page 4-65).
8. Remove the WiFi bracket if present (page 4-66).
9. Remove the Top Cover (page 4-52).
10. Lift the Fuser levers.
11. Remove the 4...

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 4-57Service Parts Disassembly
Right Cover
PL1.1.13
1. Remove the Main Tray (page 4-58).
2. Raise the Scanner.
3. Remove the Front Cover (page 4-60).
4. Remove the Inner Front Cover (page 4-62).
5. Release the 2 bosses on the bottom of the Right Cover.
6. Release several hooks that secure the cover to the Top and Rear Covers.
s3040-063 

4-58 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  Service Parts Disassembly
Main Tray
PL1.1.14
1. Open the Main Tray.
2. Release the boss on the Main Tray from the hole in the Front Cover, and then 
remove the Tray.
s3040-064 

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 4-59Service Parts Disassembly
HiPot Cover
The HiPot Cover is located next to the Toner Cartridge on the Inner Front Cover.
PL1.1.19
1. Remove the Main Tray (page 4-58).
2. Remove the Front Cover (page 4-60).
3. Starting on the left edge, release the hooks on both sides of the cover. There is 
1 hook on the left, 2 hooks on the right.
s3040-052 

4-60 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  Service Parts Disassembly
Front Cover
PL1.1.20
1. Remove the Main Tray (page 4-58).
2. Release the bosses from the left hinge and remove the Front Cover.
s3040-137